Scanning channels on 13e and 28.e

[rasp]

I did have my spiderbox 6000 running the motor on lnb 1 and vu solo2 and lnb 1



Spiderbox going cable going to motor and then to lnb


Vu solo2 going to straight lo lnb


On the original set i was getting 1400 on hotbird and 970 0n sky.

With the new setup i am getting 950 on hotbird and 466 on sky.


I think it is setup correctly because i am getting 98/96 and locking on both sats.


When scanning hot bird it gets 48% found 970 and nothing till 100%

Same thing on sky 466 up to 55% and nothing till 100%

[Mickha]

Try scanning in any missing channels manually.
Use Lyngsat, for a quick check, of what's missing.

[gbmitie]

dont waste your time scanning use a pre-prepared channel listing ala catseyes, they spend a bit of time getting things right and its worth it.

[rasp]

Mickha:

Tried that did not pick up anything

[rasp]

How do i load it, does it overwrite existing lists

dont waste your time scanning use a pre-prepared channel listing ala catseyes, they spend a bit of time getting things right and its worth it.

[DCG]

taken from the guide by lee gw

4.a Upload a Channel List
Download a pre-configured channel list example catseye's from
https://www.satpimps.co.uk/forumdispl...gma-2-Settings
Unzip the Channel List to your local HDD.
Example C:\Catseye E2 Settings File 75 East-58 West

Use VuCC to upload channel list to Vu+.

Download VuCC from
https://www.satpimps.co.uk/showthread...ol-Centre-V0-8

(or you can use Dreamset or Dreamboxedit instead)

[echelon]

yes it overwrites the existing list (so back it up if you wish to retain a copy)

when scanning, I believe it only scans the transponders and sats in its database, which may be an xml file

this is why we always recommend inputting a premade list like the catseye one, as blind scanning may not be an option