Results 1 to 12 of 12

Thread: how do i install enigma2 on my azbox premium

  1. #1
    Member dave86's Avatar
    Join Date
    Dec 2004
    Posts
    32
    Thanks
    0
    Thanked 0 Times in 0 Posts

    how do i install enigma2 on my azbox premium

    how do i install enigma2 on my azbox premium been reading but no clear answers up to now tryed doing it with my update address as www.openrsi.org give me 3 options 19.03.12 + 22.03.12 + 16.05.12 all just say downloading 100 percent done then failed to update at the moment am running 0.9.5402 please help i feel old

  2. #2
    V.I.P ManikM's Avatar
    Join Date
    Dec 2004
    Posts
    5,425
    Thanks
    457
    Thanked 703 Times in 450 Posts
    download azup 2.2.7 from site, download latest e2 zip, extract patch.e2 file - then run azup stick in the IP of your box (reboot it with network cable in holding down > button as u switch on so it goes into rescue mode and shows the IP on the LCD) then click INSTALL E2, browse for your file, select itwait about 5 mins for it to install, BOSH , JOB DONE!

  3. #3
    Member dave86's Avatar
    Join Date
    Dec 2004
    Posts
    32
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Cheers manikm 4 quick reply ill give it a go tomorrow

  4. #4
    Member dave86's Avatar
    Join Date
    Dec 2004
    Posts
    32
    Thanks
    0
    Thanked 0 Times in 0 Posts
    do i need to install a kernil not that i now what a kernil is and if so how

  5. #5
    V.I.P ManikM's Avatar
    Join Date
    Dec 2004
    Posts
    5,425
    Thanks
    457
    Thanked 703 Times in 450 Posts
    yes u can leave that ticked if your choosing one of the latest builds.

  6. #6
    Member dave86's Avatar
    Join Date
    Dec 2004
    Posts
    32
    Thanks
    0
    Thanked 0 Times in 0 Posts
    where it says install E2/Kernel with a go button do i press it ive got devices = dom fs = ext3 advanced options = format extended partition + copy Kernel is this right

  7. #7
    V.I.P ManikM's Avatar
    Join Date
    Dec 2004
    Posts
    5,425
    Thanks
    457
    Thanked 703 Times in 450 Posts
    yep
    u cant go wrong really

  8. #8
    V.I.P xanadu's Avatar
    Join Date
    Dec 2004
    Posts
    3,446
    Thanks
    129
    Thanked 207 Times in 126 Posts
    Quote Originally Posted by ManikM View Post
    yep
    u cant go wrong really
    Tell that to those whose boxes no longer boot.

  9. #9
    Member dave86's Avatar
    Join Date
    Dec 2004
    Posts
    32
    Thanks
    0
    Thanked 0 Times in 0 Posts
    my box stuck in booting mode holding vol+ key when powering on would'nt put it in recovery mode so in the end i downloaded jazup 2.6 use the patch file to get it in recovery mode got to 49% and stopped locked up end of azbox

  10. #10
    V.I.P xanadu's Avatar
    Join Date
    Dec 2004
    Posts
    3,446
    Thanks
    129
    Thanked 207 Times in 126 Posts
    Quote Originally Posted by dave86 View Post
    my box stuck in booting mode holding vol+ key when powering on would'nt put it in recovery mode so in the end i downloaded jazup 2.6 use the patch file to get it in recovery mode got to 49% and stopped locked up end of azbox
    I think JTAG only solution now. I have tried the serial solution.

    My box failed after it crashed while booting using Azup.

    E2 seems to have recently killed a lot of boxes.

    I have not got round to making a JTAG parallel adapter.

  11. #11
    Member dave86's Avatar
    Join Date
    Dec 2004
    Posts
    32
    Thanks
    0
    Thanked 0 Times in 0 Posts
    sorry for not responding quicker my mate is going to try that. As for me it was a perfect excuse to get myself a dreambox which is now on order dm800sehd so soon i will most probably need help setting that up thanks for your help and advice

  12. #12
    Junior Member
    Join Date
    Jul 2005
    Posts
    24
    Thanks
    247
    Thanked 8 Times in 5 Posts
    My own Premium went into a boot loop while using the update in the software.
    I then tried using the Azup 227 with a copy of the latest software available,i had used this Azup 227 lots of times before with no prev problems.
    I couldnt get the Azbox to connect to the Azup227,so i uninstalled the Azup227,rebooted my laptop and re installed Azup227.
    Then followed the usuall procedure Press vol + and power up the azbox from the power switch in the back.
    Ureka the azbox conected up fine reloaded an earlier software and azbox rebooted.

    I guess just one of those things

    Paul

Similar Threads

  1. How to install a HDD in Azbox Premium HD
    By s_kates81 in forum AZBox HD Newbie Questions
    Replies: 3
    Last Post: 08-07-2012, 06:53 PM
  2. Question How to download enigma2 way on your azbox premium hd
    By khaled almanaseer in forum AzBox HD E2 Newbie Questions
    Replies: 4
    Last Post: 16-02-2012, 06:15 PM
  3. Azbox Premium Clone and enigma2
    By mushroom in forum AzBox HD E2 Newbie Questions
    Replies: 39
    Last Post: 13-04-2011, 08:33 AM
  4. how to install Enigma2
    By ManikM in forum S4000 HD Enigma2 Tools
    Replies: 0
    Last Post: 24-03-2010, 12:27 AM
  5. How to install a HDD into the Azbox Premium
    By pr2 in forum AZBox HD Newbie Questions
    Replies: 0
    Last Post: 02-04-2009, 03:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •