Results 1 to 10 of 10

Thread: E2 s3500 woes :(

  1. #1
    Junior Member
    Join Date
    Oct 2012
    Posts
    5
    Thanks
    2
    Thanked 0 Times in 0 Posts

    E2 s3500 woes :(

    Desperately trying to install a bootloader capable of booting E2 on my icecrypt s3500 but i cant seem to be able to. My current bootloader is 6.40. Have tried to install a new bootloader using the plugin based installer (maxiflasher) for the s4000 (which i thought was a similar model) and using the power on, channel up, usb flash method (.ird flash image) which results in a blank screen and a flashing red light.

    Does anyone have a link to a bootloader which will work? Have been trying for a week and have exhausted googles search results.

    Thanks in advance.

    Tom.
    Last edited by tomatz; 19-01-2013 at 03:32 PM.

  2. #2
    V.I.P ManikM's Avatar
    Join Date
    Dec 2004
    Posts
    5,425
    Thanks
    457
    Thanked 703 Times in 450 Posts
    s3500 and s4000 are not similar i wouldnt try anything cross model mate!

  3. The Following 2 Users Say Thank You to ManikM For This Useful Post:

    echelon (20-01-2013), tomatz (19-01-2013)

  4. #3
    Junior Member
    Join Date
    Oct 2012
    Posts
    5
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Thanks for the quick reply.

    I only tried as per instructions on another forum for the s3500. The guy said he was able to install the maxiboot bootloader (Maxi-Flasher-T11+BA.08) for the s4000 on his s3500??? I have tried instructions for the openbox s4 and the octagon 918 too. Both of which are rebrands of the s3500.

    Sorry, only been using sat tuners for a week lol. The learning curve is immense. Luckily ive been using Linux for the past 6 years though...

    Does anyone know where i can get the bootloader i need?

  5. #4
    Junior Member
    Join Date
    Oct 2012
    Posts
    5
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by tomatz View Post
    Thanks for the quick reply.

    I only tried as per instructions on another forum for the s3500. The guy said he was able to install the maxiboot bootloader (Maxi-Flasher-T11+BA.08) for the s4000 on his s3500??? I have tried instructions for the openbox s4 and the octagon 918 too. Both of which are rebrands of the s3500.

    Sorry, only been using sat tuners for a week lol. The learning curve is immense. Luckily ive been using Linux for the past 6 years though...

    Does anyone know where i can get the bootloader i need?

    Any tips?

  6. #5
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Posts
    12,732
    Thanks
    13,913
    Thanked 9,112 Times in 4,411 Posts
    Quote Originally Posted by tomatz View Post
    Any tips?
    yes, buy an E2 box if you wish to play about with E2 , like a duo or solo2

    or seeing as you found out this info elsewhere, ask there as clearly its not known about on here and you were already advised against it

  7. #6
    Senior Member fatboy7's Avatar
    Join Date
    Nov 2011
    Posts
    125
    Thanks
    45
    Thanked 109 Times in 56 Posts
    Hi Guys.

    I did one just before Christmas and wrote these notes, the bootloader is available from the Octagon Forum.

    Icecrypt S3500HDCCI to E2 – Bootloader Change.

    Download UpdateLoader.Octagon.SF918SEplus. L6.46.zip and unzip it.
    Format a USB stick to fat32.
    Copy the above .IRD to the root of USB stick.
    USB in box, then power on holding the up button to force on .IRD.
    If this doesn’t work, porter the IRD on.
    Make sure the reseller ID is correct to the bootloader .IRD.


    Format a USB stick to fat32.
    Download a 918SE+ image. (HDMU PKTeam etc).
    Extract both files (ulmage and root.img) to the root of the stick.
    USB in box, then power on holding the down button to read from stick.
    When USB stick lights flash, let go of button.
    Box lights flashing red / green is good then solid green and now E2.
    Box lights flashing just red = reseller id mismatched to updated bootloader.IRD.

    Hope it helps.

  8. The Following 4 Users Say Thank You to fatboy7 For This Useful Post:

    buck401 (20-01-2013), echelon (20-01-2013), jovie (08-03-2014), tomatz (20-01-2013)

  9. #7
    Junior Member
    Join Date
    Oct 2012
    Posts
    5
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by fatboy7 View Post
    Hi Guys.

    I did one just before Christmas and wrote these notes, the bootloader is available from the Octagon Forum.

    Icecrypt S3500HDCCI to E2 – Bootloader Change.

    Download UpdateLoader.Octagon.SF918SEplus. L6.46.zip and unzip it.
    Format a USB stick to fat32.
    Copy the above .IRD to the root of USB stick.
    USB in box, then power on holding the up button to force on .IRD.
    If this doesn’t work, porter the IRD on.
    Make sure the reseller ID is correct to the bootloader .IRD.


    Format a USB stick to fat32.
    Download a 918SE+ image. (HDMU PKTeam etc).
    Extract both files (ulmage and root.img) to the root of the stick.
    USB in box, then power on holding the down button to read from stick.
    When USB stick lights flash, let go of button.
    Box lights flashing red / green is good then solid green and now E2.
    Box lights flashing just red = reseller id mismatched to updated bootloader.IRD.

    Hope it helps.

    Thanks for the quick reply m8. I will try tomorrow and post back results!

  10. #8
    Junior Member
    Join Date
    Oct 2012
    Posts
    5
    Thanks
    2
    Thanked 0 Times in 0 Posts
    IT WORKED IT WORKED IT WORKED!!!

    I will start a new thread tomorrow with howto and attached files!

    Thank you!

    Tom.

  11. #9
    Senior Member fatboy7's Avatar
    Join Date
    Nov 2011
    Posts
    125
    Thanks
    45
    Thanked 109 Times in 56 Posts
    No problem, glad to help.

    I used this routine on a unit that had no VFD, should be easier on VFD models.

    Enjoy...

  12. #10
    Junior Member
    Join Date
    Sep 2013
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi All,

    Had a go at the fatboy7 instructions above and seems I have bricked my box :(

    No picture, no nothing!

    Tried re-flashing with Porters Express but it just starts downloading then throws an "External Error Occurred" every time.

    Anyone got any suggestions?
    Last edited by Locky; 08-03-2014 at 04:03 PM.

Similar Threads

  1. s3500 EPG and USB HDD
    By buck401 in forum ICECRYPT
    Replies: 2
    Last Post: 01-05-2012, 08:54 PM
  2. EPG on S3500
    By Merkel in forum ICECRYPT
    Replies: 7
    Last Post: 14-04-2012, 10:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •