how to add to channel list 2 sats ie hotbird and astra

[halfax]

have added channel list via dream edit , because when scanning hotbird a lot of channels missing.
what i would like to know how to add just hotbird and astra main channel menu.
can only do one or the other.
had no problem when scanning
thanks
.

[del6600]

Hi.
If using BH 1.7.9 - Best bet is press Green/Yellow on remote, Select Addons, Select Settings, Look for the latest E2 settings, Select Download. All you sats are then installed. You will need to then go to Setup, Service Searching, Tuner Config, OK, Advanced, Select the required satellite, dependant on what system you are setting up you will need to select the correct settings here.
On my system it shows:
advanced, Satellite name & position, LNB 1, Auto, Universal LNB, Auto, Polarization, No, Band, 1.2 B, None, No, No, Committed, toneburst, None, None. Long xxx, xxx, Lat xxx, xxx, Usals xx, Stored position xxx.
I am using a motorised system and not Usals. You should then go to manual scan, Single satellite, Choose satellite, Network scan: yes, Clear before scan: Yes. Repeat this for each sat you want to watch.
You should then have all the channels your dish can pick up.
Hope this helps.

del