Results 1 to 2 of 2

Thread: Dummies guide to setting up Clarke Tech ET9000 HD

  1. #1
    Goldwafers.co.uk LeeGW's Avatar
    Join Date
    Dec 2004
    Posts
    89
    Thanks
    20
    Thanked 505 Times in 42 Posts

    Dummies guide to setting up Clarke Tech ET9000 HD

    Dummies Guide to setting up Clarke Tech ET9000 HD by Lee - goldwafers.co.uk

    To Buy an ET9000 from me, please click the link below:
    Clarke Tech ET-9000 HD Enigma 2 Twin Tuner High Definition Satellite Receiver

    --------------------------------------------------------------------------

    1. Install image.
    Download a USB image file, eg Clarke-Tech Support Image from
    https://www.satpimps.co.uk/forumdisp...-Support-Image

    Unzip the ET9000 folder to the root directory of a USB Pen Drive.
    Power off Receiver with switch on the back
    Insert USB Pen Drive into the USB socket on Receiver
    Power on Receiver.
    Image Update message will appear on the front display.
    Press the OK button behind the front flap.
    Image will now install from the USB Stick.
    Receiver will reboot once the install is complete.
    Image is now installed.

    Remove the USB Stick.

    --------------------------------------------------------------------------

    2. Network
    Connect an Ethernet LAN cable from your router to your ET9000 Ethernet port.
    Press Menu
    Select Set Up Press OK
    Select System Press OK
    Select Network Press OK
    Select Network w i z a r d and press OK.

    --------------------------------------------------------------------------

    3. How to Setup Motorised Dish using USALS

    First get your longitude & latitude info from _http://www.satsig.net/maps/lat-long-finder.htm

    Enter your post code into satsig.net and you'll get the correct LON & LAT info for your location.

    Example if I enter the following UK postal code: SE1 6JZ into _http://www.satsig.net/maps/lat-long-finder.htm

    I get the following LAT & LON:
    Latitude: 51.4979°
    NORTH
    Longitude: -0.1042°
    WEST

    Press Menu
    Select Setup Press OK
    Select Service searching Press OK
    Select Tuner configuration Press OK
    Select Tuner A Press OK

    Configuration Mode: Simple
    Mode: Positioner
    Latitude: 51.497 Press OK
    NORTH
    Longitude: 0.1042 Press OK
    WEST

    Press OK to save.

    Press Menu
    Select Setup Press OK
    Select service searching Press OK
    Select Positioner Setup Press OK
    Select goto 0 Press RED Button

    Dish should now goto 1w.

    --------------------------------------------------------------------------

    4. Upload a Channel List
    Download a pre-configured channel list example catseye's from
    https://www.satpimps.co.uk/forumdisplay.php?f=516
    Unzip the Channel List to your local HDD.
    Example C:\Catseye E2 Settings File 75 East-58 West

    Use ET9000 Control centre to upload channel list to receiver.
    Click on image below to download ET9000CC.



    --------------------------------------------------------------------------

    How to setup Receiver with VBox II DiSEqC 1.2 Positioner.

    If your VBox II already has the satellite positions stored and your changing from an old receiver to ET9000 then follow this procedure.

    Write down your VBox II satellite position numbers. These are the numbers displayed on the front of the VBox II when moving to a
    specific satellite position. These position numbers can also be found in your old receivers motor setup menu.

    Example lets say...
    Position 1 on VBox II = Astra 19e
    Position 2 on VBox II = Eutelsat W2 16e
    Position 3 on VBox II = Hotbird 13e

    You get the idea...

    First send the dish to Astra 19e using Vbox II.

    On ET9000 Remote Press Menu
    Select Setup Press OK
    Select Service Searching Press OK
    Select Tuner configuration Press OK
    Select Tuner A Press OK

    Now set Configuration Mode to Advanced. Use Left or Right keys on remote to select.

    Configuration Mode: Advanced
    Satellite: Astra 19e
    LNB: 1
    DiSEqC mode: 1.2

    Scroll down to botton of the page with the down arrow on remote.

    Stored position: 001

    Press OK to store.

    OK that's Astra 19e setup now to setup Eutelsat W2 16e

    Now send the dish to Eutelsat 16E using Vbox II.

    Select Setup Press OK
    Select Service Searching Press OK
    Select Tuner configuration Press OK
    Select Tuner A Press OK

    Configuration Mode: Advanced
    Satellite: Eutelsat W2 16e
    LNB: 2
    DiSEqC mode: 1.2

    Scroll down to botton of the page with the down arrow on remote.

    Stored position: 002

    Press OK to store.

    OK that's Eutelsat W2 16e setup now to setup Hotbird 13e

    Now send dish to Hotbird using Vbox II

    Select Setup Press OK
    Select Service Searching Press OK
    Select Tuner configuration Press OK
    Select Tuner A Press OK

    Configuration Mode: Advanced
    Satellite: Hotbird 13e
    LNB: 3
    DiSEqC mode: 1.2

    Scroll down to botton of the page with the down arrow on remote.

    Stored position: 003

    Press OK to store.

    You get the idea, now repeat for the rest of the satellites and your done.

  2. The Following 2 Users Say Thank You to LeeGW For This Useful Post:

    dave-h (03-09-2011), saman (03-10-2012)

  3. #2
    Junior Member
    Join Date
    Oct 2012
    Posts
    1
    Thanks
    1
    Thanked 0 Times in 0 Posts
    for LeeGW THANKYOU FOR YOUR INFO IN SETTING UP CLARKTECH ET9000 ESPECIALLY THE DISH SETUP 1 QUESTION FOR YOU IM NEW TO CLARKTECH ET9000 WHERE IN THE MENU DO I GO FOR SATTELITE LIST I WANT TO SETUP FROM HISPASAT DOWN TO 53 EAST SO CAN YOU HELP PLEASE I CAN SETUP ANY OTHER RECEIVER WITH NO PROBLEMS I BOUGHT THE CLARKTECH ET9000 1 MONTH AGO AND ITS TAKEN A WHILE TO GET MY HEAD AROUND IT ENIGMA2 THAT IS BUT IM GETTING THERE IT DOES EVERYTHING I WANT SO CAN YOU HELP WITH THAT SMALL BIT MY emaul is r*****09@hotmail.co.uk thankyou in antisipation

Similar Threads

  1. Dummies guide to setting up Vu+ Solo
    By LeeGW in forum Vu+ Solo Help Section
    Replies: 8
    Last Post: 11-04-2015, 12:06 AM
  2. Dummies guide to setting up Vu+ Duo
    By LeeGW in forum Vu+ Duo Help Section
    Replies: 15
    Last Post: 11-04-2015, 12:00 AM
  3. Tutorial: How to recover dead AZBox
    By andressis2k in forum AZBox HD Newbie Questions
    Replies: 48
    Last Post: 13-03-2013, 07:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •