Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Thread: Technomate TM7100 8281 menu

  1. #1
    V.I.P skilcom's Avatar
    Join Date
    Jan 2005
    Posts
    88
    Thanks
    4
    Thanked 1 Time in 1 Post

    Technomate TM7100 8281 menu

    can some one please tell me how to access the 8281 menu on my new Technomate TM7100 , I have loaded the latest magic patch , I have done a factory reset and powered off for 30 seconds, presently scanning channels , after the channel scan what do I do to access the 8281 menu ?


    All help appreciated

  2. #2
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,170
    Thanks
    0
    Thanked 16 Times in 9 Posts
    need to add the last add-on and from viewing a channel, on the RCU enter that channel number: 8 2 8 1 Ethernet <= click here

  3. #3
    V.I.P skilcom's Avatar
    Join Date
    Jan 2005
    Posts
    88
    Thanks
    4
    Thanked 1 Time in 1 Post
    where can i get the add on ?

  4. #4
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,170
    Thanks
    0
    Thanked 16 Times in 9 Posts

  5. #5
    V.I.P skilcom's Avatar
    Join Date
    Jan 2005
    Posts
    88
    Thanks
    4
    Thanked 1 Time in 1 Post
    Thanks Giga, some times its hard to see the wood for the trees!

  6. #6
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,170
    Thanks
    0
    Thanked 16 Times in 9 Posts
    agreed, sometimes tracking issue

  7. #7
    Junior Member
    Join Date
    May 2010
    Posts
    28
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Hi, i have a tm 7100 and loaded addon patch ok, press 8281 up comes (NAME SERVER+++++), i have a c.line wich goes something like this = c: freeshare.dyndns.tv.56071 jbhod ffggsd and this is where i get lost, can somebody tell me what i put in (NAME SERVER+++) then cccam, time out 1sec, filter mode auto, (ID++++) (PASSWORD++++) DES.KEY0102030405ect, (ADDRESS+++++) (PORT++++) what part of c.line goes where in the brackets please,its taken me a week to get this far and iam ready to give up, all help appreciated and will donate.

  8. #8
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,170
    Thanks
    0
    Thanked 16 Times in 9 Posts
    Quote Originally Posted by Blu-ray View Post
    what part of c.line goes where in the brackets please,its taken me a week to get this far and iam ready to give up, all help appreciated and will donate.
    did you read this:
    https://www.satpimps.co.uk/showpost....86&postcount=4

  9. #9
    Junior Member
    Join Date
    May 2010
    Posts
    28
    Thanks
    1
    Thanked 0 Times in 0 Posts
    yes still could not figure out what went where !, i need A.B.C for newbie

  10. #10
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,170
    Thanks
    0
    Thanked 16 Times in 9 Posts
    (NAME SERVER+++++) name for service so you can recognize what it is (anything what you want)
    cccam or newcamd the protocol used by server
    time out = 7 sec
    filter = Auto unless you specified a filter
    (ID++++)= jbhod
    (PASSWORD++++)= ffggsd
    (ADDRESS+++++)= reeshare.dyndns.tv
    (PORT++++)= 56071
    DES.KEY= 0102030405ect

    all help appreciated and will donate.
    keep you on this promise, meanwhile you can hit a couple of these:

    see also here:
    https://www.satpimps.co.uk/showpost....05&postcount=1
    Last edited by Giga; 08-07-2010 at 04:39 PM.

  11. #11
    Junior Member
    Join Date
    May 2010
    Posts
    28
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Thanks will try after t will let you know how i get on

  12. #12
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,170
    Thanks
    0
    Thanked 16 Times in 9 Posts
    use recent server info, if not connecting try another one, still not connecting could be similar problem check this out:
    https://www.satpimps.co.uk/showpost....22&postcount=3

  13. #13
    Junior Member
    Join Date
    May 2010
    Posts
    28
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Hi, still cant connect, ip address 192.168.1.3 subnet mask 255.255.255.0 gateway 192.168.1.1 dns 192.168.1.1 any more help to connect would be appreciated,

  14. #14
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,170
    Thanks
    0
    Thanked 16 Times in 9 Posts
    Are you using DHCP on other devices in your home network? don't touch these
    If you're using static IP's (manually set), set these to DHCP.
    do you know how to change the IP range in your router?
    Don't start without being sure what you are doing, you can loose your internet connection!
    Take note of your router settings on paper before changing anything!
    Take backup of your router settings
    have you're computer first set to DHCP, if your computer is using static ip address! other wise you can not connect to your router!

    If this is like abracadabra to you what follows, stop and get some help: friend with network knowledge!

    change home network (router, computers, ...) to operate in these settings
    router address: 192.168.123.254
    subnet mask: 255.255.255.0 (all connected in home network segment)
    if you use DHCP for assigning IP addresses, range should be 192.168.123.7 to 128. Router cannot giveaway technomate ip address.
    Technomate: 192.168.123.006
    subnet mask: 255.255.255.0
    Gateway: 192.168.123.254 (point to router)
    DNS: 192.168.123.254 (point to router)
    either have other devices connected by DHCP or give each static IP's (check you don't use IP's taken by other devices)

  15. #15
    Junior Member
    Join Date
    May 2010
    Posts
    28
    Thanks
    1
    Thanked 0 Times in 0 Posts
    give it a try

  16. #16
    Junior Member
    Join Date
    May 2010
    Posts
    28
    Thanks
    1
    Thanked 0 Times in 0 Posts
    trying another Cline

  17. #17
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,170
    Thanks
    0
    Thanked 16 Times in 9 Posts
    if it is recent and you don't get connected, check logs of your router if any traffic from or to the technomate is blocked (check by technomate IP address or MAC address

  18. #18
    Junior Member
    Join Date
    May 2010
    Posts
    28
    Thanks
    1
    Thanked 0 Times in 0 Posts
    thanks can you give ABC instructions in router

  19. #19
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,170
    Thanks
    0
    Thanked 16 Times in 9 Posts
    if you have access to the router, normally you find help on each web page of it.
    if the router blocks traffic to your Technomate <= click here

  20. #20
    Junior Member
    Join Date
    May 2010
    Posts
    28
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Hi, This is for all members who want to check to see if the port Number they where given for there c.line test is open or closed, this way you do NOT spend hours barking up the wrong tree, tm 6800/6900/7100 receivers with no connection after loading c.line should down load this free piece of software from http://portforward.com,it can also setup port forwarding for you in your router.i done a quick test on my c.line port and it was blocked so i hope this will solve all my probs i have had with my tm7100.

Page 1 of 2 12 LastLast

Similar Threads

  1. AzBox HD
    By xxxAxxx in forum AZBox HD Newbie Questions
    Replies: 994
    Last Post: 08-04-2009, 03:25 PM
  2. Replies: 0
    Last Post: 03-04-2009, 09:50 PM
  3. Instalation Guide.
    By peggle in forum 500/600/9100 series
    Replies: 4
    Last Post: 05-06-2007, 03:05 PM
  4. visionnet How to (PLEASE READ)
    By Graham7 in forum Visionnet
    Replies: 1
    Last Post: 27-11-2006, 07:34 PM
  5. hidden test menu
    By artware in forum M-Vision
    Replies: 0
    Last Post: 26-11-2006, 10:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •