I have ART full bouquet but my azbox is not seeing it
Anything i need to do to make this happen ?
Thx
Paul
I have ART full bouquet but my azbox is not seeing it
Anything i need to do to make this happen ?
Thx
Paul
Ok, with Multicas turned on, it reads the card but then does not read cccam
So looks like it is 1 or the other ?
Is that right or is there something i can do to make cccam tell it to use local card ?
No not yet
Untill next release off CCcam your hooked on newcs and CCcam
So if i install newcs, i can have both running at same time ?
Where do i get newcs from ?
Read my Sticky - a good starting point... The pdf file is at the bottom of the thread...
Thx, i have now installed the latest newcs but it does not see my card, so iassume there is a config i need to do.
I have no idea what that config is
I have ART card on 13e Viaacess if that helps ?
Please note that i only want newcs to read my card and i want cccam to do the card sharing
Last edited by paulwilko; 30-08-2009 at 10:08 PM.
Slower reading is preferable...
It [my thread] says not to use the latest version, unless one uses an external reader... Does it no?!?
So, one can get v. 1.20 from here and various servers, but getting the latest one, i clearly states, is not always the best option, so do not use 1.67, if you are to use your internal reader...
w w w satelites . info / azbox / has it, for instance, if memory serves...
It also has various CCcams...
Once one has it one tries to mess with files and once one shows one's enthusiasm, somebody comes to one's aid...
So, in my thread there is a config file for the version I mentioned with a certain Viaccess card... [Tinos]
I mean, it's not like I haven't put your nose right in it but hey... if you prefer to torture yourself, who am I to stop you?!?
also Multicas has nothing to do with any other Emu!
If you use it, no other Emu can handle the Card. Also Multicas takes API Rights, so you are "out" with this for using CCcam, or any other Emu
Yeah, noticed that with Multicas
Thx
Installing the newcs 1.20RC13 from satelites . info was not possible for me, the add on install with OpenXCAS just just gave an error message.
In the end I gave up, got an external reader and used newcs 1.67RC1.
not all link have working newcs (satelites.info), try some other link. It worked for me.
And iam running viaccess 3.0 (i think its 3.0) without a problem!
also an Error on install at the End is nomal on some Tools.
Install is OK
I ask this with fear of Goran telling me off but i am gonna anyway
I have installed newcs from the servers from the azbox as per Gorans thread. It now says it is 1.6
I found 1.20 on the web, copied the newcs file over but is still showing 1.6 and not reading my card.
Whenever i download newcs files, there is only ever 1 file in the main file, so not sure how to manually install it.
Is there something else i need to copy over to make it 1.20.
I copied it over based on info from another site. Maybe right, maybe wrong ?
Thx
Paul
http://rapidshare.com/files/27434115...newcs.zip.html
Its the second 1.20, only .bin
Copy it over yours, give rights 755
Great, will report back how i get on, many thx
Paul
Ok, did it, it was a different file size so was a different version, but for some reason it is still showing as 1.6 on CAMD Setup !
I still cant view the card.
Would i be right in saying:
1. Install from one of the online servers
2. Open filezilla and copy the file you mentioned and overwrite the one thats already there
3. Give it 755
4. Reboot Azbox
Then it should show 1.20 ?
If that is the case, i have done all that but still showing 1.6
There are two other files in the newcs folder
newcs.xml
openxcas.conf
These are both set to 644 as per the downloaded set up
Should any of those be 755 ?
Many thx
Paul
only bin needs 755
You see 1.20 when you start NewCS over telnet only.
And you must start it over telnet, for to see whats happend
make a dowswindow-telnet ipofyourbox
root
azbox if youve set a password like this
now type ps
if you see new cs as process, type
killall newcs
ps again for to see there is no newcs running
now
cd /EMU/OpenXCAS/newcs if your folder in openxcas is called newcs
./newcs
write down the log here so we can see (delete serialnumber or lines bevor)
Goran, you make me laugh ;-)
Here is my log, thx fopr your help
"****** INTERNAL enabled
TCP-log password is disabled!
level: internal
type: all
output: console, tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
tcp port: 1001
TCP log options: level 16777215 type 255
[ 19:10:32 ] [ Box detect ] Box type 9
[ 19:10:32 ] [ Config ] hwkey not found !
[ 19:10:32 ] [ Config ] ekpair not found !
[ 19:10:32 ] [ Config ] /dev/scard ECM priority: hard
[ 19:10:32 ] [ Config ] No SIDFILTER is configured, disabling SidOverride for de vice 0 (upper)!
[ 19:10:32 ] [ Newcamd ] Server name : local
[ 19:10:32 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 19:10:32 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host 127.0.0.1, Port: 12000 , Au: Off, Spider allowed: No, Sidoverride: No, reader control: No, level: 0
[ 19:10:32 ] [ EMM Cache ] Initialising Cache with 10 entries
[ 19:10:32 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1122
[ 19:10:32 ] Calibrating delay loops
[ 19:10:32 ] usleep(5) takes: 0 s 19 us
[ 19:10:32 ] usleep(10) takes: 0 s 17 us
[ 19:10:32 ] usleep(100) takes: 0 s 107 us
[ 19:10:32 ] usleep(500) takes: 0 s 506 us
[ 19:10:32 ] [ Loader ] Reader type 11 on node /dev/scard
[ 19:10:32 ] [ azbox ] Opening device /dev/scard
SCARD_IOC_CHECKCARD: ATR len=-1
SCARD_IOC_CHECKCARD: ATR len=12
[ 19:10:35 ] ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
[ 19:10:35 ] [ ******* ] Atr header is 3F 77 [INVERSE]
[ 19:10:35 ] parseAtr: 3F 77 18 00 00 C2 47 40 00 68 90 00 00 00 00 00
[ 19:10:35 ] parseAtr: 00
[ 19:10:35 ] [ ATR ] T=0 1etu=31.00us Guardtime:12etu WWT:115200etu
[ 19:10:35 ] [ ATR ] Fi 1 (372) Di 8 (12)
[ 19:10:35 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 19:10:35 ] [ ATR ] freq 1000000.000 sciFreq 5000000.000
[ 19:10:35 ] [ azbox ] Set card type to 0x500 (mode 2)
[ 19:10:35 ] [ Loader ] Init Viaccess card
[ 19:10:35 ] [ Viaccess ] Sending to Card: CAA4000000
[ 19:10:35 ] [ azbox ] Delay is 6us
[ 19:10:35 ] write: CA A4 00 00 00
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 90
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 00
[ 19:10:35 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:35 ] [ Viaccess ] Sending to Card: CAACA40000
[ 19:10:35 ] [ azbox ] Delay is 6us
[ 19:10:35 ] write: CA AC A4 00 00
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: AC
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 90 00
[ 19:10:35 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:35 ] [ Viaccess ] Sending to Card: CAB8000007
[ 19:10:35 ] [ azbox ] Delay is 6us
[ 19:10:35 ] write: CA B8 00 00 07
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: B8
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: A4 05 00 C5 63 74 30
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 90
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 08
[ 19:10:35 ] [ Viaccess ] Status Word from Card: 9008
[ 19:10:35 ] [ Keyman ] Adding key C56***0 type 0 on Provider 000000 for caid 0500 ID=0
[ 19:10:35 ] [ Viaccess ] Sending to Card: CAA4000000
[ 19:10:35 ] [ azbox ] Delay is 6us
[ 19:10:35 ] write: CA A4 00 00 00
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 90
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 00
[ 19:10:35 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:35 ] [ Viaccess ] Sending to Card: CAC000001A
[ 19:10:35 ] [ azbox ] Delay is 6us
[ 19:10:35 ] write: CA C0 00 00 1A
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: C0
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: FF F4 00 40 00 00 3E 84 2D 7C 00 01 02 FF FF FF
[ 19:10:35 ] read: FF FF FF 09 FF FF FF FF FF 0F
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 90
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 00
[ 19:10:35 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:35 ] [ Viaccess ] Sending to Card: CAACA50000
[ 19:10:35 ] [ azbox ] Delay is 6us
[ 19:10:35 ] write: CA AC A5 00 00
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: AC
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 90 00
[ 19:10:35 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:35 ] [ Viaccess ] Sending to Card: CAB8000006
[ 19:10:35 ] [ azbox ] Delay is 6us
[ 19:10:35 ] write: CA B8 00 00 06
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: B8
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: A5 04 C5 63 74 30
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 90
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 08
[ 19:10:35 ] [ Viaccess ] Status Word from Card: 9008
[ 19:10:35 ] [ Keyman ] Adding key C56***30 type 1 on Provider FFF400 for caid 0500 ID=0
[ 19:10:35 ] [ Viaccess ] Sending to Card: CAA4020000
[ 19:10:35 ] [ azbox ] Delay is 6us
[ 19:10:35 ] write: CA A4 02 00 00
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 90
[ 19:10:35 ] [ azbox ] Timeout is 714240us
[ 19:10:35 ] read: 00
[ 19:10:35 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:35 ] [ Viaccess ] Sending to Card: CAC000001A
[ 19:10:35 ] [ azbox ] Delay is 6us
[ 19:10:36 ] write: CA C0 00 00 1A
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: C0
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 02 11 18 40 00 BF 3D EC 2D 7C 00 01 02 FF FF FF
[ 19:10:36 ] read: FF FF 08 09 0A 0B 0C 0D 0E 0F
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 90
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 00
[ 19:10:36 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:36 ] [ Viaccess ] Sending to Card: CAACA50000
[ 19:10:36 ] [ azbox ] Delay is 6us
[ 19:10:36 ] write: CA AC A5 00 00
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: AC
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 90 00
[ 19:10:36 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:36 ] [ Viaccess ] Sending to Card: CAB8000006
[ 19:10:36 ] [ azbox ] Delay is 6us
[ 19:10:36 ] write: CA B8 00 00 06
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: B8
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: A5 04 C5 63 74 30
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 90
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 08
[ 19:10:36 ] [ Viaccess ] Status Word from Card: 9008
[ 19:10:36 ] [ Keyman ] Adding key C5****0 type 1 on Provider 021110 for caid 0500 ID=1
[ 19:10:36 ] [ Viaccess ] Sending to Card: CAA4020000
[ 19:10:36 ] [ azbox ] Delay is 6us
[ 19:10:36 ] write: CA A4 02 00 00
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 90
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 00
[ 19:10:36 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:36 ] [ Viaccess ] Sending to Card: CAC000001A
[ 19:10:36 ] [ azbox ] Delay is 6us
[ 19:10:36 ] write: CA C0 00 00 1A
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: C0
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 02 11 28 40 00 BF 3D D0 2D 7C 00 01 02 FF FF FF
[ 19:10:36 ] read: FF FF 08 09 0A 0B 0C 0D 0E 0F
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 90
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 00
[ 19:10:36 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:36 ] [ Viaccess ] Sending to Card: CAACA50000
[ 19:10:36 ] [ azbox ] Delay is 6us
[ 19:10:36 ] write: CA AC A5 00 00
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: AC
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 90 00
[ 19:10:36 ] [ Viaccess ] Status Word from Card: 9000
[ 19:10:36 ] [ Viaccess ] Sending to Card: CAB8000006
[ 19:10:36 ] [ azbox ] Delay is 6us
[ 19:10:36 ] write: CA B8 00 00 06
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: B8
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: A5 04 C5 63 74 30
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 90
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 08
[ 19:10:36 ] [ Viaccess ] Status Word from Card: 9008
[ 19:10:36 ] [ Keyman ] Adding key C5***30 type 1 on Provider 021120 for caid 0500 ID=2
[ 19:10:36 ] [ Viaccess ] Sending to Card: CAA4020000
[ 19:10:36 ] [ azbox ] Delay is 6us
[ 19:10:36 ] write: CA A4 02 00 00
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 90
[ 19:10:36 ] [ azbox ] Timeout is 714240us
[ 19:10:36 ] read: 08
[ 19:10:36 ] [ Viaccess ] Status Word from Card: 9008
[ 19:10:36 ] [ 0500 ] Init took: 0.787748
[ 19:10:36 ] [ Loader ] Card 0500 on port /dev/scard ready
[ 19:10:36 ] [ Loader ] Starting Newcamd Server on port 20000
[ 19:10:36 ] [ NewCS ] Ready to GO!
MMP[newcs]$ [ 19:10:36 ] [ Card queue /dev/scard ] Starting...
[ 19:10:36 ] [ Newcamd:20000 ] rlogin for user dummy fd 8
My sign: D6 EC B3 82 98 20 C2
[ 19:10:36 ] [ Newcamd:20000 ] Bad read? rejecting
cd /EMU/OpenXCAS/newcs"
Last edited by paulwilko; 01-09-2009 at 08:15 PM.
OK, NewCS seems to be able to read your card. Now you need an EMU to connect to NewCS to enable you viewing it.
This can be MGCamd, Mbox, CCCam...
Bookmarks