Hi Does anyone know what this receiver can open
Printable View
Hi Does anyone know what this receiver can open
Lots when converted to Openbox
Thanx, Already converted to openbox, and it's working a treat.
could you please send me the attatched file on how to convert a phoenix apollo tp an openbox X-820 please david@cook1940.wanadoo.co.uk
n e chance of the conversion intructions for me please,.
Satpaul, could you clue me too as to this Openbox,, thankyou.
Convert Phoenix Apollo CI MC to Openbox just fill in ** Have Added CI and Fta receiver
first file to convert second is new software
Have added channel list channel editor and key file in bottom download which took over 4 hours to do :respect-055:
h**p://rapidshare.com/files/119860822/Convert_CI_MC_To_OpenBox_X820.zip
h**p://rapidshare.com/files/119614065/Openbox_X820_5.33_20080404.zip
h**p://rapidshare.com/files/119862739/Convert_to__Openbox_f300_5.02_200 70605_-RT.zip
h**p://rapidshare.com/files/119863103/CONVERT_CI-x820.zip
h**p://rapidshare.com/files/119863285/openbox_f300_533_20080404_100.zip
h**p://rapidshare.com/files/119973292/Channel__Key_Editor___Channel_Lis t.zip
thanks satpaul :respect-056: ruthless
satpaul the s/w to convert to open box is empty every thing else is fine ruthless
All there have downloaded it and checked it:respect-014:
every thing is there except the file to convert it doesnt work it says it has 0 bytes ? can you help cheers ruthless
mine didnt work either, just says please check file ,.
Have fixed it it is now complete:bravo-009:
thankyou satpaul ive downloaded it but aint got time to try tonight will let u know how i get on tomorrow many thanks ruthless :respect-055:
[QUOTE=satpaul;531713]Convert Phoenix Apollo CI MC to Openbox just fill in ** Have Added CI and Fta receiver
first file to convert second is new software if you want an up to date channel list let me know I have one which took over 4 hours to do :respect-055:
Would appreciate your channel List m8.:respect-020:
cheers..
will add channel list and PO Edit to load it tomorrow night when I get it off my laptop:respect-055:
Have uploaded it
THANK U VERY MUCH SATpaul , respect,.
did the upgrade to open box 820, put in the number to change to yes, but, it wouldnt let me put in the sw to start,so therefore im clearing nothing, some input would b appreciated,.
Load the converter file then load the latest software then go to menu 1117 turn patch on load my channel list with PO Edit and key file simple as that:applause-003:
thanks satpaul, dont know how to load latest s/ware, or where to get it sorry for being a pain,.
latest software at top of page everything you need all in the rapidshare downloads:king-042:
Many Thanks.:respect-054:Quote:
Originally Posted by satpaul
cheers..
i give up, keeps saying wrong file, will go back to apollo soft,.
which Phoenix do you have
ap0llo ci+mc, however just realised not working with old either, think when my comp crashed 2 months ago, lost the loader ,i d/loaded,.
drahcirkQuote:
Originally Posted by drahcirk
To Load the conversion S/W use the Phoenix Apollo Loader called "All_Updater(1.00)"
The S/W is the Conversion S/W named "wsw" File.
Make sure you have the right S/W Version for your Box..!
Before you Open the AllUpdater V1.0..
put your STB in OFF at the Mains use the switch on the back.!
That's important otherwise it will NOT connect properly..!
Now Insert your NullModem Cable..
Open the All Updater(1.00) and Set up your COMM Port..! now Load the S/W File press Update and NOW Switch the Box ON using the Back Mains Switch..!
AND WAIT until it shows an "" 8 "" in the Display..
First you see three Green Lines being moving across the Screen then a " n " then a " 0 " wait patiently until this finishes and you see the "" 8 "..IMPORTANT..!!
Takes about 5 to 6 mins..
Now you can Scan your Sats after this Operation if you wish..they will remain in place after the Openbox S/W is Loaded.
Loading the Openbox S/W use the Updater for Openbox S/W " OpenBoxUpdater_v2_RC4 "
Same procedure as above..
WAIT until you see the "" 8 "" Displayed on Sceeen.!!
Now go to Menu > Press 1117 on your Remote and Activate the EMU..
Now using the "All keys + tps - Pobedit - 0.922 " Load the latest Softcam and you are Up and running..
You only need to do the Key Reset.
ALL Finished..:respect-010::respect-057:
Enjoy.
Cheers:)
Andrew
thanks andrew will try that, i appreciate your reply,.:respect-047::respect-047:
drahcirkQuote:
Originally Posted by drahcirk
AS you have the CI+MC then look in the Software Section I have Uploaded the most Recent S/W Version and the Latest Softcam for you..OK
To Load the Softcam the BOX can remain ON..
NO problem with this.
enjoy.
Cheers;)
Andrew
d/loaded and progged to open box no probs, but this is where my prob isi havent got what u call v2rc4 ,cannot see or find this n e where,.
drahcirkQuote:
Originally Posted by drahcirk
Well thats a Step in the right direction now ..!
OK.. I will Upload it into Tools Section.
just wait a few mins..OK
Cheers:)
Andrew
wow thanks,.:respect-046:
Quote:
Originally Posted by drahcirk
drahcirk
Hope you are Happy Now...:respect-059:and everything has gone well.
I don't really see any problems if you follow my Guide Lines.
Enjoy.:respect-048:
Cheers
Andrew
hope i did wright in pobedit, i clicked on the 13% keys and pressed send, only prob i had was i had to reload the channels, my thanks,.:bowing-036:
drahcirkQuote:
Originally Posted by drahcirk
Well that should NOT have happened..
You followed my Instructions right..?
After the S/W you then Loaded the Softcam File I upload with the All Keys..right.
Just go to the Top of the Proggie and Open the Keys Section then Scroll down and find SEND..then press this once and the Keys will Load AU.
you can follow the process on the Top of the Proggie in the middle part..A Blue line will show and run from Left to Right..!
You should NOT have lost your Channels.m8y..
did something wrong there..!
BUT you are up and running..right..?
Cheers:respect-054:
Andrew
oh sorry ,i went to each line i wanted, whos a buffoon then, can get a bit ,but wont open tps, do u suggest i re do it,.
drahcirkQuote:
Originally Posted by drahcirk
It seems TPS is still making a lot of problems for every Receiver Type...
IF everything else except TPS is working leave as is until we get a Fix..OK
If you wish you can try this one i have Posted here:
https://www.satpimps.co.uk/showthread.php?t=89295
Cheers;)
Andrew
Hi All,
my first experience with apollo to openbox 820 was to wipe out all my channels.
What i did wrong was to get the latest key file, and in poledit did a full upload instead of just a key upload.
From now on, after my channel scan, i download everything from my reciever, update the keys and then i can either just update the keys or update the lot. If you save the full receiver downloads, you can have a backup of all your channels and favourites in case summat goes wrong.
Ps, just in passing, has anyone got sotv-gold or Diamond working for more than 2 seconds. I select the channel, go to biss, select the correct biss, go back to channel, nothing, turn off/on and i get the channel for 2 seconds, then it goes off, only power cycling gives me a further 2 seconds. It's not that I'm a perv :drool5: It's just that I'm trying to understand openbox and it's bugging me that I'm doing something wrong :frown: I must be cos others say it's up and running.
Many thanks
Mr Smiley:respect-050:
ur lucky u get it for twosecs, iv got all fs in mine shud that b so,.
Hi, is that al f's as in ff ff ff ff ff ff.
My understanding is, :redface:
Tune to the channel in question
Go to main menu - 1117 - biss keys
select the key you want to use
go back, back and back all the way out of the menu's and the channel should clear. :respect-069:
Mmmmmm, well i have to do all that, then power down/up and i get 2 seconds then blank screen.
For the keys;
get the current keys, take the last 8 blocks, remove the 4th and 8th. select an empty biss key ( all f's ) ( for the open box it seems that 69 is set-up for gold and 68 for Diamond )
put in the result of the above, same key for both blocks of 6. select that key so it's highlighted. and follow the above this when you want to watch.
Well i think that's how it goes, but 2 seconds isn't what i'd say was worth all the effort. It's just bugging me :smash: that people say it's working but it won't work for me.
Is there a bug in 820 on the apollo :respect-010:
Mr Smiley
Listen Guys..
IF you use the f3k Files I have been Posting them you DO NOT have to Change/Insert OR Edit anything..
ALL the Keys are Present and Updated..!
If the Read me says that the SonT Diam and Gold are present..then ALL you have to do is:..
1.Go to SoTv Diamond or Gold on HB.
2.Enter the BISS Menu..
3.Select the BISS Line 71 > 74 depending which one you want to View..
4.Highlight this Line and Press OK..on your Remote.
5.The Channel opens up..you will see the Pics in the Background..!!
6.Now Exit the whole process..
If of course you DO NOT press OK to Activate the BISS Line this will also NOT work..!
If you select the wrong Channel Line while being on the wrong Channel then this will also NOT work..
Try another Line..!
If of course you try to watch them 2 Days after the File was released then this will OBVIOUSLY NO longer work..cos they change the Keys very often..!
You have to wait for an Updated File..OK
This definitely works cos I have tried it..
I always Try out the Files before I Post anything..
So you can rest assured that they DO work..
and are Virus Free..OK
Enjoy.:respect-062:
Cheers
Andrew