Fransat on vu+ Duo . Fransat sur vu+ duo

Good afternoon

I am a new member, I have a Fransat box with the card HD, I watch all my French channel but the box is not so good for recording, I had since few year a vu+ box, i settle this box but I can see my French channel, only have few channel like Vosges TV, Mont Blanc but I don't have TF1 , france2 , ect

I would like to know if someone can help me for settle that on my box, because I am French and will be please

Je parle français donc le seul réponse peuvent être en Français ou Anglais

Regards

oscam can read your card

I don't know, I am new and this product, it take me already a week just to have the channel on the good satellite

After that I don't know what to do, need help

What is it oscam

Regards

Oscam is an Emulator.
I'm not sure it will be that easy, but you might as well load Oscam and try it.
You can start by reading the guides, provided by Lee, from Goldwafers:
https://www.satpimps.co.uk/showthrea...ting-up-Vu-Duo

You can find a suitable Oscam file here:
https://www.satpimps.co.uk/showthrea...s-(2013)-(2014)

Try a version posted bt A. You can load a few versions.

To install them you will need Filezilla, or other FTP program, you can use the one provided in the VU+ Control Centre:
https://www.satpimps.co.uk/showthrea...ol-Centre-V0-8

To log in you will need your receivers IP address, you can find this in the receivers Menu, something like Setup, System, Network, LAN, Adapter Settings, it should look like 192.168.1.2.
Providing you have your VU+ connected to your router.
Once logged in click on the FTP tab.
On the left hand side you should see your PC's files, on the right your VU+ files.
Just navigate to the Oscam.ipk file, you have just downloaded, and drag, and drop them, into the tmp folder, on the lower right.
Once done go to your receiver, press the green button, followed by the yellow button, on your remote, and select the Manually install ipk files.
Select the Oscam file and press OK.
Wait for the receiver to finish loading it, and probably re-boot, then press your Blue Button, followed by the < > arrow button, and select Oscam.

@Nozahic,
have you mangaged to install Oscam yet?
Have you found out if your Fransat card will work, in any other receiver, apart from the official Fransat receiver?

I have finally found a post, regarding Frasat, from TJExcalibur:
"The Octagon SF4008 does support CI+ cam with the HD Freaks image. I use it for her indoors to watch Fransat with a CI+ module and Fransat card."

the ci+ cam is gathering dust here, oscam continues to update the card, if it ever fails though ive got the ci+ as a backup

Which version of Fransat card do you have, 3tv?
Just read, on another forum, that they're turning off v4.0, and only using v5, and v6.

I was busy I will look tomorrow for oscam, because when I bought the box few year ago, the box was reading Sky card , but all the settle of the boxes has been done by a professional

I have the latest card from Fransat, i receive 3 week ago because my other car was V4

Thank to all of you for your help

Quote:

---

Originally Posted by Mickha

Which version of Fransat card do you have, 3tv?
Just read, on another forum, that they're turning off v4.0, and only using v5, and v6.

---

v6, hopefully it will keep on working after v4 support stops.

Analoguesat, on another forum, has provided a link, where you can check your cards number, to find out if it will be affected:

Code:

---

http://www.telesatellite.com/actu/49906-les-vielles-cartes-fransat-vont-devoir-etre-remplacees.html

---

I think I have oscam installed already on my box

Like you can see on the pic, in red at the bottom you can see oscam, but I don't have info on

And when i put my fransat card ( version 6 ) I have nothing the TV stay black

RegardsAttachment 67224Attachment 67224

If you press the Blue button, on your remote, you should get a list of installed cams.
Have you tried the card both ways? Chip facing up, chip facing down?
Please post a picture of the cams menu, which should read the card details.

Look à the pic. I have oscam but know witch version

Quote:

---

Originally Posted by Nozahic

Look à the pic. I have oscam but know witch version

---

you will need to edit your oscam server file, I would recommend first you add a more recent oscam if its been on there for a while. You will need to ftp into your reciever

Your receiver states that you have 4 cams installed.
One should be the CI, Common Interface, the slot for a CAM, Conditional Access Module, but check the other 3, by bringing up the Cam menu, pressing the Blue Button, and then use the < > keys to highlight one of the cams and press the OK button to select it.

Dear Mickha

I will look at that tomorrow and pass you the info, I will take pic

Dear 3tv

How I do what you ask me to do, like I say I am new on this system. I have this thing on because when I bought my 3 box when I was living in Spain , i order them from a guy in UK who settle all for me , all my box was connect together and with 1 sky card connect all the box was working together

Thank you for your understanding

do you know your recievers web interface ip? if so type it into your browser. if the webinterface appears do you see a Oscam interface option?

Dear Mickha

I take this pic, hope that will help you

Dear 3tv

I am not sure what you has me, it take pic, can you let me know if it s that, other way can you explain what I need to do

Regards

Dear 3TV

Maybe it is that

That looks like your receivers IP Address, with that you can connect, to your receiver, using programs like Filezilla, Dreamboxedit, the VU+ Control Centre and Dreambox Control Centre.

What you means ? I need to do something?

Regards

Try downloading, and running the VU+ Control Centre, on your PC:
https://www.satpimps.co.uk/showthrea...ol-Centre-V0-8

Just unzip it, using Winrar, Winzip, or the free 7-zip, then start up VUCC.exe.
Once it opens type in your receivers IP Address and click on connect.
This will allow you to use the various options, for connecting to your receiver.

Done I have that now, what I need to do

Regards

Quote:

---

Originally Posted by Nozahic

Dear Mickha

I take this pic, hope that will help you

---

select the common interface cam in the menu and hit ok, the cam should change from oscam to common interface cam. insert your card into the ci+ cam. I cant remember if it goes in chip up or chip down so try both.

leave it in for 30 mins to see if it up dates.

if not go back and restart Oscam.
on your computer browser type in your recievers ip address.

when the webinterace opens is there a further option for Oscam interface? is so access that and we can see what version your running

3tv , I done that and I am waiting now

Thank you

About the other thing Oscam, can you detail what I need to do exactly

Cheers

type the ip address 192.168.1.65 found on the receiver into your web browser

After over 30 minutes, screen �� still black

I put the IP address on my computer, after that , what I need to do after

Quote:

---

Originally Posted by Nozahic

After over 30 minutes, screen �� still black

I put the IP address on my computer, after that , what I need to do after

---

what is displayed on the web interface screen on your computer?

Look at that

is there an oscam interface option in the extras tab?

I can't see that

Maybe my version is too old

do you know your receiver username and password?

you could also try guessing your oscams port

192.168.1.65:8080
192.168.1.65.81

etc....

I cant remember the user name and password, like I say someone settle that for me

I try few combinations without success

Sorry , I am not so clever with that

Regards

Maybe that will help you, Mickha ask me to download

3TV

I know the user and password, I look on google on they are the one from the beginning

What I need to do this that

Regards

use the ftp option then find were your oscam files are located, try var/keys or var/etc/tuxbox....