Serial Mode: sssp

shown on TM-6900 HD, guess it is very similar on other Technomates that have recent patches updated and have sssp

when using sss(p) programs you have to set technomate to use this feature

goto Main Menu in Installation select Option
http://i654.photobucket.com/albums/u...sp/sssp001.jpg

select Serial Mode and press (OK) on remote
http://i654.photobucket.com/albums/u...sp/sssp002.jpg

in Serial Mode
http://i654.photobucket.com/albums/u...sp/sssp003.jpg

select SSSP
http://i654.photobucket.com/albums/u...sp/sssp004.jpg

leave the menu's and select one of the channels that should work with the program
http://i654.photobucket.com/albums/u...sp/sssp005.jpg

if you get timings above 1000 ms: freezes do occurre

you can also apply filters while using SSSP:

in Menu Option while switched Serial Mode set to SSSP you have the option Filter set to Auto
http://i654.photobucket.com/albums/u...Pfilter001.jpg

switch to User
http://i654.photobucket.com/albums/u...Pfilter002.jpg

you can now ●Edit Filter do this once.
http://i654.photobucket.com/albums/u...Pfilter003.jpg

caid = used cam: seca, nagra
Prov Id = Provider of channel / bouquet

And now the beauty <= click here :respect-040:

if you send a empty key bin to technomate it runs smoother

or you could try with filter with for each bouquet that is opened with SSSP and use the appropriate CAID and Prov ID (provider ident)

some of this info can be found in CCcam.providers and Fausto_CAIDS.TXT or other places.
Always try to prevent a clash between Cams

how do I select serial mode on a 1500+ , its not in the options list ? I've got the phantom patch installed, is that ok ?

just change the channel to activate.


https://www.satpimps.co.uk/showthread.php?t=133840

Quote:

---

some model receivers require you to enable sssp in receiver menu or a simple channel change enables sssp.

---

portcom error:
change the comport to 1 or Change the config used in the program to use the assigned comport. In Cilquer Ici this would be in the mpcs.conf (open with notepad)
and change this line:[serial]Device=au://tuner@/dev/ttyS0

Code:

---

Port  Serial      Hex N°
COM1  /dev/ttyS0  3F8
COM2  /dev/ttyS1  2F8
COM3  /dev/ttyS2  3E8
COM4  /dev/ttyS3  2E8

---

Comport parameters (Computer)
Speed: 128000 (if this does not work: Use lower speed : 115200, 57600, 38400, 19200)
data: 8, parity: None, stop: 1, data control: None

Poll Error: not in SSSP mode
If you have to set Menu: Option in Technomate make sure Serial Mode is set to: SSSP and not RS232

Good Morning guys,
Is bulsat on 39e still running via V_plug?

thanks

Quote:

---

Originally Posted by rubberpants7

if you send a empty key bin to technomate it runs smoother

---

I set up a blank filter and the performance on Bulsat went from occasionally freezing to being PERFECT.

Thanks Giga.

Hi joany,

Can I ask what you mean with a blank fliter? I am having some timing issues sometimes, but not all of the time. If I can put on a "blank filter" then that may correct it.

Thanks

hi i can get bulsat no problem but i can not get 19 east filim1 etc am i doing something wrong please help me thankyou it says no poll

Bulsat still opening for me, as is JSC Sports 1-10 on 13E, but currently no C/Ned 19E or C+ Nordic on 1W!:respect-069:

thanks mate was pulling my hair out

Quote:

---

Originally Posted by holmroad

Bulsat still opening for me, as is JSC Sports 1-10 on 13E, but currently no C/Ned 19E or C+ Nordic on 1W!:respect-069:

---

Was getting C/Ned fine this morning - but this afternoon only clearing part of the time. Often getting 2000ms, is there a way to improve this. Eurosport HD Dutch 23.5 opens fine though - and stays open as long as you stay on the channel - even if you turn the computer off.

check your serial communication is working between your computer and technomate
https://www.satpimps.co.uk/showthread.php?t=110802
if that is ok follow instructions here:
https://www.satpimps.co.uk/showthread.php?t=135732

Hi Giga,

Those forum links appear to be dead....

What info do I need to put into the filter section? Will the filter help the freezing problem?

Thanks

Quote:

---

Originally Posted by goodlajd

What info do I need to put into the filter section?

---

https://www.satpimps.co.uk/showthrea...513#post732513

Quote:

---

Will the filter help the freezing problem?

---

could relieve server getting wrong requests, speeding up replies
avoiding conflict with Emu & Softcam key
keep this empty softcam on your stick/hard disc together with latest one so you can easy switch when needed.
https://www.satpimps.co.uk/showthread.php?t=117873

I'm trying to change the com port from default and understand that I need to
access the mpcs config of the Cliquer ici and change a line to config this. My problem is, not being completely gened up, how do I get into this programme to chnage the line? In my folder it comes back the PC needs to know what programme to use to access the file.
Sorry to be a little thick, but any guidance appreciated.

Best wishes from,

Gibson.

Quote:

---

Originally Posted by gibson

I'm trying to change the com port from default and understand that I need to
access the mpcs config of the Cliquer ici and change a line to config this.

---

look for this file and open it with notepad: mpcs.conf

Device=au://tuner@/dev/ttyS0

change the last digit according to the used comport:
0 = comport 1
1 = comport 2
2 = comport 3
3 = comport 4

Hi folks,
How can we convert the new key for Bulsat to v_keys for those who use v_plug?

With thanks

Quote:

---

Originally Posted by rubberpants7

if you send a empty key bin to technomate it runs smoother

---

Empty Softcam Technomate <= click here
have it always on the USB hard disc for loading, always save the current key: easy to switch keys <> no keys