Humax 2000HD Channel List

Humax 2000HD Channel List motorised 43 east- 30 west with favs and ITV HD set to Usals my Usals so set to yours after loading all channels for Diablo 2 Dragon etc :respect-055:

Hi satpaul,

I'd like to thank you. I am sure I am not the only one who has been waiting for such a list.

Could you give us some more info on what it includes (or not)?

I guess only one way to find out... possibly at the weekend.

You say it is USALS, any problems if I do not use USALS?

Also what FW is it based on?

If you do not have the time to answer, do not worry.

I will try to upload it to my HDCI2000 at the weekend (after backing up my old one, of course).

Thanks.

tinto de verano

Version 16 firmware
all done today took 5 hours
all setup for Diablo cam or dragon
USALS set to
N53.1
W0.6
can be set to diseqc 1.2

thank you

great list, we should put our LAT y LONG first in the Humax

Hi All,

Its been so long, Is it Null or Serial cable to upload
to Humax Hd STB, Thanke.

BF...

null modem cable m8

H

Thanks satpaul. I needed a fixed dish version (DiseqC 1.0) for four LNB's, so I've taken the liberty of converting the file for my and anybody else's needs (cut and paste job in Formula).

_http://rapidshare.com/files/367274170/Humax_HDCI2000_23_03_10_Fixed_Dis h_DiseqC_1.0.zip

What loader do you sue to load this settings from scratch?

Help!

Hi Pajao,

You need Formula EU (Channel Editor for HDCI-2000 Model), which you should be able to get from the Humax website.

tinto de verano


Added later:

Formula EU for European units, or

Formula ME for Middle East units

The receiver had to be reset when I had it repaired.

I used this but the reciever still stood in the Menu position when reconnected to the TV. What is going on?

Am I doing somthing wrong.

Sounds like you are doing something wrong m8,load programme to comp.then if I remember correctly you have to open it and turn on box,when loaded you then need the loader programme on you computorswitch off box on back,then open loader it will then ask for box to be switched on and it will connect,open new list and send to box,I think that you have to turn box off at rear even for loading first programme.

Hi Pajao,

Let's forget about your other two posts and concentrate on this one, maybe.

1) What exactly was the problem with your receiver?

2) What exactly do you mean by reset?

3) What firmware have you got?

4) Have you got any sats/channels in your list or is it all empty (is that what you mean by reset?

Depending on your answeers... maybe you need to do all the installation process again... and at some point add a channel list usingo Formula..

tinto de verano

I loaded the latest satelite settings and it shows that the setting has been loaded, but when i connect to the tv, I can only see the language settings. Is ther something I'm doing wrong?

Hi Pajao,

When you say you loaded "the latest satelite settings ", do you mean SatPaul's "Humax 2000HD Channel List motorised 43 east- 30 west with favs and ITV HD set to Usals" which appears at the beginning of this thread?

If, so, have you modified that list in any way (an error in the modification might be the cause of your problem)?

Or did you load as is, with no modifications? Then no errors should be expected.

Also, what happened before you loaded the channel list? Were you able to watch channesl or were you also seeing the language settings?

But I think that your problem, if you can only see the language settings, might be:

Because yor box was repaired and reset... you might need to set it up/carry on all the installation process again, before actually loading any channel lists.

Look at the manual, Chapter 3 Installation ******:
"When powering on your product for the first time after purchase, the installation ****** will operate automatically. This
chapter includes the first time setup of the language, time, search channel and software update which will show you how
to start the initial installation.

tinto de verano

I've now done the initial installation as you said such as language time settings and even search Hotbird to show some channels. Can I try again now?

is this settings too big? I've deleted the Radio channels though before transfering data. This currently going but takes some time. I hope it works now.

Hi Pajao,

Ok, so you now got it configured and working. Good! Congratulations.

Yes, you should now be able to upload the channel list from your computer to the HDCI2000.

Some people recommended doing a facory reset before uploading a channel list, but I think you can try without resetting (probably what the people who repaired your box did), and having to go all through the installations again.

Some people also recommended deleting all the channels you already have before uploading a new channel list, but I think you do not really need to.

Just upload that channel list and be patience, and cross your fingers.

Good luck.

tinto de verano

Where did you delete the radio channels from?

From the HDCI2000, or from the channel list?

If from the channel list... you might have done something wrong by accident and the list might not upload properly... be careful if/when editing the list.

And yes, uploading takes a ehile... be patient.

By the way, when you get it working, and add or remove a few channels.make a backup of your new list, just in case.

tinto de verano

Don't congratulate me yet M8, Its still not finished uploading. We'll see what happens when the uploading finishes. I did this yesterday but nothing happened.

I keep my fingers cross that all will be well.

:07:

I deleted the radio channels on Fomula and save the file before uploading. Will this still work after data transfer?

My experience of the loader is you need to save to desk top and then open that copy and send to receiver otherwise it seems to default to all again .

The uploading has now completed the satelite is back on standby. shall i see if there any channels loaded on the TV?

Have a go,always keep a copy of your list so you can always get back to it.

The upload did not work its only showing the Hotbird channels which I search for before - Help. What am I doing wrong?

Sorry, my PC just crashed...

Anyway@ if it fails, hopefully not, try uploading SatPaus's original channel list, without editing/deleting any (radio) channels.

That might work.

Although it will hopefully work even if you deleted some.

You can always delet them, one by one, slow, painful in the HDCI.

Ermm... if all goes well, please, remember to press the Thanks button, please.

Thanks.

tinto de verano

Did you save to desk top and then go there for a copy to load back to receiver m8

Didn't work?

Sorry to hear that.

Maybe becuase you edited/deleted some (radio) channels?

As I was saying earlier, try to upload SatPaul's list as is.

Good luck.

tinto de verano

Surry, I have to leave now.

But I will try to be back tomorrow to try and help you.

tinto de verano

What proceedure are you following to upload new channel list and which programme are you using please.

I'm using formula EU and trying to load satpaul listings. I think I'll try again with editing and see what happens.

You need to use the prog.formulae for HD from Humax site,the other is for version updates from Humax,the one you want is a channel editor.

Yes I know this is the one - Click below link:

http://www.humaxdigital.com/uk/suppo...ategory_seq=48

Cannot use live link mate

its only showing hot bird. Maybe I need to do a factory reset before doing this. What do you think?

Are you using the programme that I said,if so how are you doing it.

I loaded the file on to the fomula then upload the file to the satelite by turning the switch at the back on to upload. But after doing it last I was only seeing the Hot bird channels after loading. Will I need to reset? by to the language menu again?

Is the box accepting your new list,or not changing m8.

sorry had to edit,should be no reason to do anything else as I dont.

What programme did you use to load version 0.16 .

Its the WDN4OAK from Humax

Right does your box show that version in system status