Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

26-10-2010, 05:11 PM
leif666

Finally, it seems that a stable enigma 2 has arrived to my azbox :-)
But do anyone know if there are any plans about DVB-T support? (mpeg-4)
26-10-2010, 05:18 PM
nstergi

Quote:

Originally Posted by hfmls

MickeySA

Prepare to blow your mind :P
This is what u guys made our azbox hd to do!!!

.MKV tested:
Bit rate : 39.4 Mbps
Width : 1 920 pixels
Height : 800 pixels

Overall bit rate : 42.1 Mbps

AUDIO
Format : DTS
Bit rate : 1 510 Kbps
Channel(s) : 6 channels

CPU PEAK AT 42.1 MB/S ------------ 42,3% cpu use, the rest of the sample drop down to 30% cpu use

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Bit rate : 21.6 Mbps
Width : 1 920 pixels
Height : 800 pixels

Overall bit rate : 24.0 Mbps

AUDIO
Format : AC-3
Bit rate : 384 Kbps
Channel(s) : 6 channels

CPU PEAK AT 24.0 MB/S ------------ 36% cpu use, the rest of the sample drop down to 25-30% cpu use

So...conclusion. PERFECTLY SMOOTH AND 100% WATCHABLE, hicup free, error free, not even one frame drop. Won't get better then this! :)
Now we just need play,pause,rewind,stop,fast forward remote controls :)
btw: after a movie reaches 100% it just stops in last frame, could u make it go back to mediaplayer previous menu please?

BTW: FTP speed using azbox connected via cable to router, and my laptop via wireless N.
Transferred 1 file totaling 90,02 MB in 12,70 seconds (7,12 MB/s) :) beats the crap outta azbox original firmware speed.

great news !!!!

I really cant wait for a release that supports both dvbt and dvbs tuner without problems.

and then bb original fw:respect-059:
26-10-2010, 05:25 PM
hfmls

40 mb/s bitrate movies, cpu usage is sick..do u guys know anything heavier ?
just for the fun.
26-10-2010, 05:48 PM
sattommy

Quote:

Originally Posted by hfmls

MickeySA

Prepare to blow your mind :P
This is what u guys made our azbox hd to do!!!

.MKV tested:
Bit rate : 39.4 Mbps
Width : 1 920 pixels
Height : 800 pixels

Overall bit rate : 42.1 Mbps

AUDIO
Format : DTS
Bit rate : 1 510 Kbps
Channel(s) : 6 channels

CPU PEAK AT 42.1 MB/S ------------ 42,3% cpu use, the rest of the sample drop down to 30% cpu use

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Bit rate : 21.6 Mbps
Width : 1 920 pixels
Height : 800 pixels

Overall bit rate : 24.0 Mbps

AUDIO
Format : AC-3
Bit rate : 384 Kbps
Channel(s) : 6 channels

CPU PEAK AT 24.0 MB/S ------------ 36% cpu use, the rest of the sample drop down to 25-30% cpu use

So...conclusion. PERFECTLY SMOOTH AND 100% WATCHABLE, hicup free, error free, not even one frame drop. Won't get better then this! :)
Now we just need play,pause,rewind,stop,fast forward remote controls :)
btw: after a movie reaches 100% it just stops in last frame, could u make it go back to mediaplayer previous menu please?

BTW: FTP speed using azbox connected via cable to router, and my laptop via wireless N.
Transferred 1 file totaling 90,02 MB in 12,70 seconds (7,12 MB/s) :) beats the crap outta azbox original firmware speed.

Very nice to hear. If you wait a little (for like 10 seconds or so) it still stays at last frame?

Otherwise i will check and try to fix. But this is not priority. First trying to get dvd playback fixed. with audio streams and subtitles etc. After that maybe look into the srt subs, as they do seem to get pushed but not shown yet.
26-10-2010, 05:50 PM
sattommy

Quote:

Originally Posted by hfmls

i got another request, i noticed image black bars don't appear, it's stretched.. could u guys add an aspect ratio option or auto detection?
because in some movies, if black bars are removed they become very stretched.
thank you.

isnt there a plugin for this already in e2? Not sure where else to set this for now
26-10-2010, 05:53 PM
hfmls

nice, i and many other users would really appreciate .srt support :) thank you very much.

if i wait 10 seconds i don't get menu either, i tried over a minute :)

btw, about black bars, why are they removed? some movies become very stretched after that.

if u need beta tester i am available for whatever u need :)
26-10-2010, 05:54 PM
hfmls

Quote:

Originally Posted by sattommy

isnt there a plugin for this already in e2? Not sure where else to set this for now

honestly i dunno.
but i remember a nice nice plugin for enigma2.
auto resolution i think.
works really good in tv and movies.
26-10-2010, 05:55 PM
sattommy

Quote:

Originally Posted by hfmls

nice, i and many other users would really appreciate .srt support :) thank you very much.

if i wait 10 seconds i don't get menu either, i tried over a minute :)

btw, about black bars, why are they removed? some movies become very stretched after that.

if u need beta tester i am available for whatever u need :)

I dont know why they are removed. I think they are just not in the movie but need to be put there. I believe this has always been an issue with dreambox video playing.

Maybe you can read around some forums to see if dreamboxes have similar issues

Yes i think autoresolution was the plugin, not sure if it works. Could be the video driver first needs to be extended to allow for video mode changes.
26-10-2010, 05:57 PM
buyukbang

I wonder how subtitles will effect the performance when implemented ???

Quote:

Originally Posted by hfmls

40 mb/s bitrate movies, cpu usage is sick..do u guys know anything heavier ?
just for the fun.
26-10-2010, 05:59 PM
sattommy

Quote:

Originally Posted by buyukbang

I wonder how subtitles will effect the performance when implemented ???

they should not have much effect i think. srt subtitles seem to be pushed through framebuffer device in dreambox e2.

Does anyone know if you can change audio channels in movies on dreambox e2? Which formats are supported. And are mkv subtitles supported on dreambox??
26-10-2010, 06:01 PM
hfmls

Quote:

Originally Posted by buyukbang

I wonder how subtitles will effect the performance when implemented ???

i dunno, but i honestly don't think it's gonna get to 99% :D
26-10-2010, 06:06 PM
hfmls

Quote:

Originally Posted by sattommy

they should not have much effect i think. srt subtitles seem to be pushed through framebuffer device in dreambox e2.

Does anyone know if you can change audio channels in movies on dreambox e2? Which formats are supported. And are mkv subtitles supported on dreambox??

yes they are.
i had a dm800 using dream-elite and i could use .srt subtitles. (external) in mkv or avi.
Or i could use internal subtitles inside mkv container.

Audio channels i dunno.

BTW: I googled it! black bars are enigma2 problem, or...were.
I read if i set the option 16:9 just scale we will get it right.
But i don't think GUI options for a/v are working.
26-10-2010, 06:07 PM
jkont

Is 1080p or at least 1080i signal supported by the E2 firmware ?

I can't take more then 720p from HDMI even if I use the 1080i setting .!!!

I also think that image quality if much worst than the image from original firmware.
26-10-2010, 06:08 PM
zfeet

Quote:

Originally Posted by hfmls

MickeySA
So...conclusion. PERFECTLY SMOOTH AND 100% WATCHABLE, hicup free, error free, not even one frame drop. Won't get better then this! :)
Now we just need play,pause,rewind,stop,fast forward remote controls :)
btw: after a movie reaches 100% it just stops in last frame, could u make it go back to mediaplayer previous menu please?

BTW: FTP speed using azbox connected via cable to router, and my laptop via wireless N.
Transferred 1 file totaling 90,02 MB in 12,70 seconds (7,12 MB/s) :) beats the crap outta azbox original firmware speed.

It seems that The_Ripper has written a better driver for the SMP863x than Sigma Designs :)
26-10-2010, 06:10 PM
hfmls

Quote:

Originally Posted by jkont

Is 1080p or at least 1080i signal supported by the E2 firmware ?

I can't take more then 720p from HDMI even if I use the 1080i setting .!!!

I also think that image quality if much worst than the image from original firmware.

OSD/GUI settings in a/v settings menu aren't working. u gotta do that manually.
26-10-2010, 06:17 PM
vrlika

If I may ask is this version of E2 safe enough to instal for a total newbie like me ?
Just to watch all sats via usals setting and cccam,
and thank you to ripper and co. for the hard work and effort they put into this project !!!
26-10-2010, 06:18 PM
kasukabe

@jkont:
On file /etc/init.d/bootup:

Code:

insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_720p50 -hdmi_chip $hdmichip 0 14 15 100 0"

in this line, set it to HDMI_1080p50, and after reboot, you will get 1080p Display.
26-10-2010, 06:20 PM
hfmls

sattomy i tried now a 38 mb/s mkv and ac3 sound
the killa.sample.mkv ( the one with a million birds flying around)
i get no sounddrops and image is ok.....but, at first seconds i get many many pixelization.

i noticed the diference from other clips were because this .mkv is kinda old and it's level 5.1 .. i know this level sucks and should be 4.1.

do u think u could do something to improve this or should we only use 4.1 level? (since nowadays, releases are always 4.1)
26-10-2010, 06:23 PM
hfmls

Quote:

Originally Posted by vrlika

If I may ask is this version of E2 safe enough to instal for a total newbie like me ?
Just to watch all sats via usals setting and cccam,
and thank you to ripper and co. for the hard work and effort they put into this project !!!

it«s probably safe, but this is just to report bugs and to test.
nothing to be using in day by day :)
wait a few more releases /days :P
26-10-2010, 06:26 PM
vrlika

Quote:

Originally Posted by hfmls

it«s probably safe, but this is just to report bugs and to test.
nothing to be using in day by day :)
wait a few more releases /days :P

Thanx a lot m8 thats what I wanted to know, I will wait then before I upgrade .:)

Show 40 post(s) from this thread on one page