Enigma 2 - AZBOX HD

Too be honest guys we bought this receiver because of the full HD capability didn't we? but if in the box was written
Full hd plays all the files like a popcorn hours box
But you have to restart the box 2 3 times during a movie and it has the worst idiot developers working on it would you guys buy it?

Too late for me as I bought it for reading some wrong feedbacks!!! now it's sitting unplugged (that way dosen't p*ss me off) on a shelf doing nothing but collecting dust, and I now using my old realable dm7020 sd to watch some tv as for media I use my computer also connected to my tv with a decent software.
My only hope is theripper and he's team!!! if he succcede then good for all us!!! if not thanks for trying mate you are a star and thumbs up for you.
But sorry!!! I really feel that I wasted 220 quids that could be worth half of a Vu+ duo!!!
Excuse my english
P.S.
OPENSAT TEAM? PLEASE GO AND FIND YOUR SELF ANOTHER BUSINESS THIS IS NOT FOR YOU FOR SURE
If you are planning to buy an AZBOX!? don't!!! my advice!!!
My regards everyone and have fun :-)

:respect-055:

Hello everyone. I wanted to learn how to develop enigma2, and solved the problem of tuner? thanks

@devilred

Go****** and ask these guys! They might give you a push in the right direction!

================================= =================

Quote:

---

Links
No links are to be posted to other commercial satellite retailers other than our site sponsors.
No http links to any other sites.
No http links to any other satellite forums.

---

I thought this was the forum for reference

Quote:

---

Originally Posted by devilred

I thought this was the forum for reference

---

what are your skills?

unfortunately I can not help develop the best I can do and try.

For The_Ripper

*************************

Regards from North America
==========================

Hello .. Please hellp.

The receiver display is booting. To connect RS-232 pytty error.( Checking zboot signature.. it's not zboot file.)
(Error : Internal, code = ffffffff.) What to do???:frown:

********************************* *
* YAMON ROM Monitor
* Revision 02.06-SIGMADESIGNS-01-2.8.0.1
********************************* *
Memory: code: 0x11000000-0x11040000, 0x11200000-0x11204000
reserved data: 0x11240000-0x12440000, PCI memory: 0x12440000-0x12840000
Environment variable 'start' exists. After 1 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C (or do BREAK) to bypass this.

xrpc failed (9)--- if a xtask is using a cipher or if you reboot
--- xrpc will fail with RM_BUSY
Checking zboot signature.. it's not zboot file.
Error : Internal, code = ffffffff
YAMON> ****s
Error : Command not found : ****s
YAMON>
YAMON>
YAMON> xrpc faSAMON> AAAMON> xrpc faSAMON> AAAMON> xrpc faSAMON> AAAMON> xrpc fa
SAMON> AAAMON> xrpc faSAMON> AAAMON> xrpc faSAMON> AAAMON> xrpc faSAMON> AAAMON>
xrpc faSAMON> AAAMON> xrpc faSAMON> AA

I get also stuck, but I get no Yamon bootprompt with putty.
Here what I try:

I use a normal serial cable(the same for programming Cards on a serial Cardreader-Cable is OK, have also tested two other cable)
My Comportsettings in Hardware on PC is
Baud= 115200
Datebit = 8
Parity = no
stopbit = 1
Xon/Xoff

I have a Max232 and tested= no log in putty, sometimes an Y---nothing I can do
Also I have a Pollin TTL Changer...the same no Log in Putty
In Box only booting, nothing more.

Im out of Ideas, maybe someone else has an Idea for me?

OK, I get now some signs (a lot of) but not to read, a lot of letters. Tested with and without xon/off but no luck

Im a Step forward, but dont looking good.
First my Max 232 was defect I think.
Nor Ive taken an old Sagem Serial Adapter without 3 or 5Volt, only rx,tx and gnd

This comes:

xosPe0 serial#xxxxxxxxxxxxxxxxx3f5db2fxx x subid 0x50
xenv cs2 failed
xenv cs3 failed¡øpower supply: ok
dram0 ok (9)
zboot (1) failed

Serial xed by me

Quote:

---

Originally Posted by hanswurscht

Im a Step forward, but dont looking good.
First my Max 232 was defect I think.
Nor Ive taken an old Sagem Serial Adapter without 3 or 5Volt, only rx,tx and gnd

This comes:

xosPe0 serial#xxxxxxxxxxxxxxxxx3f5db2fxx x subid 0x50
xenv cs2 failed
xenv cs3 failed¡øpower supply: ok
dram0 ok (9)
zboot (1) failed

Serial xed by me

---

The circuit of max232.the 5.v gets from the two pins (vcc) receiver

I know the Cable Pins.
As I said, my Max232 doesnt work anymore, only an y in hterminal.
I use an Sagem Handy Serial Adapter,only with 3 Cables, without Vcc.

and the Log of Putty is this:
xosPe0 serial#xxxxxxxxxxxxxxxxx3f5db2fxx x subid 0x50
xenv cs2 failed
xenv cs3 failed¡øpower supply: ok
dram0 ok (9)
zboot (1) failed

So no zboot, no yamon Prompt, nothing I can do?

I have an old Jtag for Parallelport, but I dont know which Pins are where(its an old Jtag for Galaxis Easy World), also no manual for it.

Jtag lpt can only be done in linux not to Windoos..

Quote:

---

Originally Posted by dimitris_p

Jtag lpt can only be done in linux not to Windoos..

---

WRONG!
In most of the cases you need an old pc or a slop cpu pc ( less than 1.4 Ghz ) with a real parallel port on the motherboard, so you are sure the interrupts work ok with the software.
Also depending on the software you might need to add an additional driver for parallel port to emulate the direct access , this is when the OS is NT family , like XP.
For best results i used on various receivers an old P3 with win98 on it.

no Problem to use whatever as System :)
But there are no Tools for or I dont find it, only for TTL and this seems to be nonsens for my Problem

Quote:

---

Originally Posted by snakie

WRONG!
In most of the cases you need an old pc or a slop cpu pc ( less than 1.4 Ghz ) with a real parallel port on the motherboard, so you are sure the interrupts work ok with the software.
Also depending on the software you might need to add an additional driver for parallel port to emulate the direct access , this is when the OS is NT family , like XP.
For best results i used on various receivers an old P3 with win98 on it.

---

This just in others reciver. In azbox programs run only on linux.

Here is brief explanation how to recover your azbox HD when there is no zboot (BOOTING... problem)
http://www.pristavka.de/index.php/topic,6691.0.html (in Russian)

Please can anyone translate it? I dont speak russian and the Downloads are all down. Also I see its only Premium, have elite

check this: http://translate.google.bg/translate...c,6061.45.html

Google Chrome has automatic translation ability...