Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

24-10-2010, 08:17 PM
andressis2k

Quote:

Originally Posted by DimitarCC

How can i connect the serial cable? Is there thread saying it?
If Yamon is running how can i fix my box? Thanks!

Try this https://www.satpimps.co.uk/showthread.php?t=141544
24-10-2010, 08:27 PM
door

can someone post cccam emu any version for this fw and how to make it work?

Thanks.
24-10-2010, 08:29 PM
moicas3004

Quote:

Originally Posted by feedme

Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?

I think to get 100% good drivers is just round the corner, all features are done , but not in one version .

:bowing-036: to team !:respect-023:

Me too.

After the first reboot no more tunner working.:117:

I also have a second tunner, DVB-C, can be for this?
24-10-2010, 08:30 PM
Abdul1508

Quote:

Originally Posted by andressis2k

Hi. I've got Fixed Astra 19,2 dish
1.0.25 - Ok
1.0.26 - No signal
1.0.27 - No signal

When scan, I get no channels. Signal is 99%, and BER -22% always

What can I do?

Regards

I have the same here with my azbox premium:angelsad2:

1.21 scan - ok
1.25 Scanning - no signal
1.26 Scanning - no signal
1.27 Scanning - no signal
24-10-2010, 08:38 PM
simon30000

1.27 28e scan ok 1085 chans sd/hd ok runnin cccam213
same here with audio loss
thankyou to all involved in this project
u succeded and won ,congrats on makin e2 work on az
:respect-054::respect-054::number-one-043:
24-10-2010, 08:43 PM
door

Quote:

Originally Posted by simon30000

1.27 28e scan ok 1085 chans sd/hd ok runnin cccam213
same here with audio loss
thankyou to all involved in this project
u succeded and won ,congrats on makin e2 work on az
:respect-054::respect-054::number-one-043:

Can you post files for cccam to work and instructions?

thanks.
24-10-2010, 08:45 PM
feedme

Quote:

Originally Posted by feedme

Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?

I think to get 100% good drivers is just round the corner, all features are done , but not in one version .

:bowing-036: to team !:respect-023:

28.2 channels found , diseq with A,B,C,D config stared to work.

sound comes and goes as it wishes.
24-10-2010, 08:47 PM
andressis2k

Quote:

Originally Posted by moicas3004

On first reboot it worked fine but after i restared the box, no longuer i can use the tunner. No signal in PAT!?

Any solution for this?

I isered a list, chanels open fine with cccam, but after that no longuer the tuner recives signal.

version 27.

Quote:

Originally Posted by andressis2k

Hi. I've got Fixed Astra 19,2 dish
1.0.25 - Ok
1.0.26 - No signal
1.0.27 - No signal

When scan, I get no channels. Signal is 99%, and BER -22% always

What can I do?

Regards

Quote:

Originally Posted by feedme

Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?

I think to get 100% good drivers is just round the corner, all features are done , but not in one version .

:bowing-036: to team !:respect-023:

Quote:

Originally Posted by moicas3004

Me too.

After the first reboot no more tunner working.:117:

I also have a second tunner, DVB-C, can be for this?

Quote:

Originally Posted by Abdul1508

I have the same here with my azbox premium:angelsad2:

1.21 scan - ok
1.25 Scanning - no signal
1.26 Scanning - no signal
1.27 Scanning - no signal

Removed the second tuner (DVB-T), re-installed 1.0.27, and all worked great!
On combo boxes, we must do it. Why? I don'k know, but it works :D
24-10-2010, 08:52 PM
onkelm

Hi,

e2 works fine here on azbox-elite.
Sometimes no sound, switching channel helps.
On HD no sound.

1. question
I like to mount a path to my networkdrive.
On my VU+ it is done in auto.network.
But here does not work, any idea ?

2.question
it is not possible to record on usb hardrive so far, or am I wrong ?

however, more than I expected so far - keep going for this perfect work.
:respect-023: :respect-059: :respect-023:

onkelm
24-10-2010, 08:56 PM
paulemh

Quote:

Originally Posted by paulemh

Hello,

I Have a AZbox Elite and i am Install Enigma2 1.0.27 on a HHD not in my DOM, but this Enigma2 only make 3 partition on my HDD what can i do for have the outher partition from my hdd.
I am make the other partition manual with Paragon Partition Manager and format in ext3.

Thanks

and a big thanks for building this enigma2 :respect-046:

Now i have mount manual my outher partition with:
mkdir -p /mnt/hda4
mount /dev/hda4 /mnt/hda4

What i am must set in "/etc/fstab" for mount my new partition autmatic then my box start.
24-10-2010, 09:00 PM
jolatacqce

trying to installe e2 1.0.27,followed @telesat,instructions,but using,azup,get msg .can't connect to host.I used ip adr.which was on vfd.any help would be appreaciated. Q1. Should the ip addr.of receiver be same as it was prior E2.install? The ip adr. showing on vfd is that of my pc.Could this be the reason why Icannot connect? HELP!
24-10-2010, 09:04 PM
moicas3004

Quote:

Originally Posted by andressis2k

Removed the second tuner (DVB-T), re-installed 1.0.27, and all worked great!
On combo boxes, we must do it. Why? I don'k know, but it works :D

Anyone else can confirm that removing the second tuner the signal is no longuer lost?
24-10-2010, 09:20 PM
paulemh

Quote:

Originally Posted by paulemh

Now i have mount manual my outher partition with:
mkdir -p /mnt/hda4
mount /dev/hda4 /mnt/hda4

What i am must set in "/etc/fstab" for mount my new partition autmatic then my box start.

ok final.
I have automount my outher partition with this line in /etc/fstab.

/dev/hda4 /mnt/hda4 ext3 defaults
24-10-2010, 09:23 PM
RogerThis

The_Ripper and MickeySa and the guys:

Please stop posting in this thread. It gone on for long enough.
We have a new section that should be properly utilised.

MOD's Please Lock This Thread!!!
24-10-2010, 09:34 PM
leoleo

Quote:

Originally Posted by moicas3004

Anyone else can confirm that removing the second tuner the signal is no longuer lost?

Yes, confirm !!
24-10-2010, 09:39 PM
Abdul1508

Quote:

Originally Posted by andressis2k

Removed the second tuner (DVB-T), re-installed 1.0.27, and all worked great!
On combo boxes, we must do it. Why? I don'k know, but it works :D

I do not use two tuners. I've only DVB-S2 tuner.
I think the bropleem the drivers fault, the signal is not received correctly.
The ripper can maybe make him or the team, I hope ... :respect-017:
24-10-2010, 09:54 PM
MickeySa

Quote:

Originally Posted by RogerThis

The_Ripper and MickeySa and the guys:

Please stop posting in this thread. It gone on for long enough.
We have a new section that should be properly utilised.

MOD's Please Lock This Thread!!!

Which section and thread ?

You see it is moved in right one AzBox E2 Newbie ?!
24-10-2010, 09:59 PM
MickeySa

If somebody want to make screenshots using Webinterface , use this grab file maded by DDamir.

Place grab file in /usr/bin

Dont forgett chmod 755.
24-10-2010, 09:59 PM
joe 1234567

Ok i will take out my dvb-t and see if that help's
24-10-2010, 10:03 PM
halabessa

@ MickeySa & the Ripper & team

Would you please explain to us why once 1.027 E2 installed & after several reboot..... almost all of us have the sound gone? is it still a problem in tuner driver you are fixing or is there any other technical reason?

Thank you for your usual support:respect-053:

Show 40 post(s) from this thread on one page