Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

12-12-2010, 08:07 PM
hfmls

ok....that said, proves one thing, no more HD stutter with fast movements.
12-12-2010, 08:39 PM
Juka

Quote:

Originally Posted by 2jj

am I missing something here? I have my card in the internal cardreader with CCcam and it´s working like a charm. Just followed this guide:
hxxp://www.satpimps.co.uk/showpost.php?p=761648&postcount=8

So, what´s the card and the provider?:respect-050:
12-12-2010, 08:57 PM
GOG

Quote:

Originally Posted by hfmls

ok....that said, proves one thing, no more HD stutter with fast movements.

Yes mate, 720p looks nice. My provider also uses 1080i50, I can't even use that as an output resolution in 1.0.2, only 1080i60 or 1080p50.

Let's hope the next release will be THE one :woot-035:
12-12-2010, 08:59 PM
2jj

Quote:

So, what´s the card and the provider?

Canal Digital Nordic (sweden)
Ooops. I think I have an solution on this "problem" No internal cardreader working. CCcam hops involved that fooled me
19-12-2010, 03:45 AM
ReddishD

[QUOTE=pascha99;736739]Tuner driver?
Have a look one the E2 drivers for the DNBU24511IST-NIM ,used in
Opti*** 9500.
It uses demodulator STV0903B, STV6110A

_hxxp://gitorious.net/open-duckbox-project-sh4/tdt/trees/master/tdt/cvs/driver/frontends

The tuner of the premium+ should be compatible in electrical design.
The last number of part numbering describes only what mechanical
type it is.See uploaded manual,side 13.
24511 is : vertical
24512 is : horizontal
24513 is : not described,but also horizontal with changed if-input
position.

The Opti*** is also produced with other frontends.
An ICC-Version you can buy,but no drivers yet.

Here an overview(not complete),of azbox tuners(dvb-frontends)

DVB-S2
DNBU24512ICC Elite/Premium / Connexant?
DNBU24513IST Premium+ /demodulator STV0903B, STV6110A

DVB-T
DNOD44QZH
################################# ################
20453 is most likely H, Low band IE no 22kh tone 22khz.
(Just a thort may be wrong)!
let me know.
23-12-2010, 12:29 PM
MickeySa

Just some information for all of You :)

- New Overclock driver/module ( You can safely set freq. of CPU if You need more speed, and this will not affect stability of Your receiver ).

- Recording / Subtitles - In Final phase, You can expect in next release

- A/V Settings fixed ( Changing resolutions and outputs for HDMI, Component, Scart etc. )

- Several other fix-es on Enigma 2.

Stay tuned, Christmas is comming and new release with it :)
23-12-2010, 02:20 PM
[0_o]

Thanks team ;)

I dont pretend to annoy nobody, but can I ask when team should know where comes a fix for internal reader support? Since you are implementing new modules, like overclock, and internal reader should be working since some versions ago (came on changelog), will be fixed soon?

Thanks and Congratulations!
23-12-2010, 02:50 PM
peterpau

DVBs2 hd is fixe?
:respect-063:
23-12-2010, 02:52 PM
DragontearS

Quote:

Originally Posted by MickeySa

Just some information for all of You :)

- New Overclock driver/module ( You can safely set freq. of CPU if You need more speed, and this will not affect stability of Your receiver ).

- Recording / Subtitles - In Final phase, You can expect in next release

- A/V Settings fixed ( Changing resolutions and outputs for HDMI, Component, Scart etc. )

- Several other fix-es on Enigma 2.

Stay tuned, Christmas is comming and new release with it :)

Can we also expect a first rudimental dvb-t driver for premium and elite? Just to know...
23-12-2010, 02:55 PM
DragontearS

Quote:

Originally Posted by peterpau

DVBs2 hd is fixe?
:respect-063:

hd channels already work ..
23-12-2010, 03:00 PM
hfmls

Quote:

Originally Posted by DragontearS

Can we also expect a first rudimental dvb-t driver for premium and elite? Just to know...

i am assuming, from what i just read that they are trying (like expected) to make dvb-s2 stable enough. Only after they will start to work in other tunners.
Like they always said.

obs: i only expect release to be today since day 24 is terrible for internet! many family and friends :)
23-12-2010, 03:14 PM
gadgeteer

Quote:

Originally Posted by DragontearS

hd channels already work ..

It doesn't work for me since RTi Core version. My hd channels are always stutter, jitter or jerk(whatever you call :mad:). I really hope that the coming X'mas gift will fix this. :respect-060:
23-12-2010, 03:53 PM
DragontearS

yes I really know that, but now dvb-s2 seems to be very stable, so I thought they would have started for dvb-t..
@gadgeteer: I have a premium (not plus), and I see HD channels without problems..
23-12-2010, 04:06 PM
GOG

Quote:

Originally Posted by gadgeteer

It doesn't work for me since RTi Core version. My hd channels are always stutter, jitter or jerk(whatever you call :mad:). I really hope that the coming X'mas gift will fix this. :respect-060:

Same here mate, especially on 0.8W. There's a bug report posted about it, we can only hope it gets fixed.
23-12-2010, 04:16 PM
DragontearS

Quote:

Originally Posted by GOG

Same here mate, especially on 0.8W. There's a bug report posted about it, we can only hope it gets fixed.

I receive them on 13 est, but in past I had same problems...
23-12-2010, 04:28 PM
hfmls

Quote:

Originally Posted by DragontearS

yes I really know that, but now dvb-s2 seems to be very stable, so I thought they would have started for dvb-t..
@gadgeteer: I have a premium (not plus), and I see HD channels without problems..

It still has problems, HD are not good, with fast movements it stutters.
No recording, subtitles,teletext. Many things missing, only after that they will move on to other tunners.
23-12-2010, 04:50 PM
hfmls

Quote:

Originally Posted by MickeySa

Just some information for all of You :)

- New Overclock driver/module ( You can safely set freq. of CPU if You need more speed, and this will not affect stability of Your receiver ).

- Recording / Subtitles - In Final phase, You can expect in next release

- A/V Settings fixed ( Changing resolutions and outputs for HDMI, Component, Scart etc. )

- Several other fix-es on Enigma 2.

Stay tuned, Christmas is comming and new release with it :)

MickeySA thank you for keeping us posted, but could you be a bit more specific ? :) I would like to know if tomorrow or today, and if today, will it be at night, afternoon?
I am asking this because holiday coming, many family and friends are gonna be at our homes, i gotta take 1 hour to update enigma2 :P
Not trying to be a pain in the ass, just asking.
23-12-2010, 06:40 PM
xanadu

Is the media player going to be fixed in next version?

It would be great to watch something without cogs appearing and a soundtrack that is in sync with the video. :)
23-12-2010, 08:43 PM
hfmls

well, i've watched over 30 .avi movies now and all worked out great.
mkv i only tested 2.
23-12-2010, 09:15 PM
xanadu

Quote:

Originally Posted by hfmls

well, i've watched over 30 .avi movies now and all worked out great.
mkv i only tested 2.

Mine are mostly MKV 1080p DTS and all struggle to play.

Lots of similar reports in the RTi bug thread.
23-12-2010, 10:48 PM
vlaya

Quote:

Originally Posted by hfmls

well, i've watched over 30 .avi movies now and all worked out great.
mkv i only tested 2.

Most movies are not in 16:9 format, so the picture iz deformed. Did you watch it like that, with long faces? :)
23-12-2010, 10:49 PM
hfmls

well, they appear ok here,but i noticed that black bars dont appear :( image is stretched.
23-12-2010, 11:12 PM
vlaya

I only watch tv shows because they are in 16:9 format, they play ok and I tested both .avi and .mkv.
24-12-2010, 10:30 PM
linda59

can we waiting anything tonight?? something new???? congratulations to the team for the good work.I WISH TO ALL MERRY CHRISTMAS AND ALL THE BEST! :respect-051:
28-12-2010, 03:24 PM
lucky13

making 2 mapped drives

Quote:

Originally Posted by lucky13

ok i tried this by adding the following line to the rcS file:

#!/bin/sh
#
# rcS Call all S??* scripts in /etc/rcS.d in
# numerical/alphabetical order.
#
# Version: @(#)/etc/init.d/rcS 2.76 19-Apr-1999 miquels@cistron.nl
#

PATH=/sbin:/bin:/usr/sbin:/usr/bin
runlevel=S
prevlevel=N
umask 022
export PATH runlevel prevlevel

# Make sure proc is mounted
#
[ -d "/proc/1" ] || mount /proc

#
# See if system needs to be setup. This is ONLY meant to
# be used for the initial setup after a fresh installation!
#
if [ -x /sbin/unconfigured.sh ]
then
/sbin/unconfigured.sh
fi

#
# Source defaults.
#
. /etc/default/rcS

#
# Trap CTRL-C &c only in this shell so we can interrupt subprocesses.
#
trap ":" INT QUIT TSTP

#
# Do we have /proc/progress and set VERBOSE to "no" ?
# If so, calculate the number of scripts and the incremental step
#

# HACK: progress needs LCD to create /proc device entry
if [ -f /lib/modules/$(uname -r)/modules.dep ] && [ $(cat /lib/modules/$(uname -r)/modules.dep | grep dreambox_rc2 | wc -l) -gt 0 ]; then
/bin/true;
else
echo "regenerate module dependencies";
depmod -ae;
fi

[ $(cat /lib/modules/$(uname -r)/modules.dep | grep lcd | wc -l) -gt 0 ] && modprobe lcd

if [ "$VERBOSE" = no ]; then
if [ -e /proc/progress ]; then
set `ls -1 /etc/rc$runlevel.d/S* | wc`
numscripts=$1
# bootup, the first script, increments until 25.
# the userspace then picks up at 50
PROGRESS_incstep=`expr 25 / $1`
PROGRESS_value=25
PROGRESS=yes
export PROGRESS_value PROGRESS_incstep
fi
fi
export VERBOSE PROGRESS

#
# Call all parts in order.
#
for i in /etc/rcS.d/S??*
do
# Ignore dangling symlinks for now.
[ ! -f "$i" ] && continue

# Handle verbosity
[ "$VERBOSE" = very ] && echo "INIT: Running $i..."
if [ "$PROGRESS" = yes ]; then
export PROGRESS_value=`expr $PROGRESS_value + $PROGRESS_incstep`
echo "$PROGRESS_value Starting $i..." >/proc/progress
fi

case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set start
. $i
)
;;
*)
# No sh extension, so fork subprocess.
$i start
;;
esac

#
# Report status based on result code
#
result=$?
if [ "$PROGRESS" = yes ]; then
if [ "$result" = 0 ]; then
echo "=s" >/proc/progress
else
echo "=f" >/proc/progress
fi
fi
done

#
# For compatibility, run the files in /etc/rc.boot too.
#
[ -d /etc/rc.boot ] && run-parts /etc/rc.boot

#
# Finish setup if needed. The comment above about
# /sbin/unconfigured.sh applies here as well!
#
if [ -x /sbin/setup.sh ]
then
/sbin/setup.sh
fi

mount -t cifs \\\\IPofWINDOWS\\sharename /media/net -o username=user,pass=password

but on reboot the azbox failed to reboot and I've just spent the last hr rebuilding it....am i putting the sytax in the right place at the end of the file ?

ok this is working fine now with the above line for mapping a network drive, how would I edit this file to add two mapped drives instead of one...i've tried adding another line

mount -t cifs \\\\IPofWINDOWS\\sharename /media/net -o username=user,pass=password

and

mount -t cifs \\\\IPofWINDOWS\\sharename /media/net2 -o username=user,pass=password

or even the same line again mount -t cifs \\\\IPofWINDOWS\\sharename /media/net -o username=user,pass=password

but these dont seem to do anything, the first line works fine but the second seems to be ignored
28-12-2010, 03:39 PM
BIGIFA

i got this to work by useing this config

mount -t cifs \\\\IPofWINDOWS\\sharename /media/net -o username=user,pass=password
mount -t cifs \\\\IPofWINDOWS\\sharename /media/cf -o username=user,pass=password

this then shows the second share as compactflash in the media player
28-12-2010, 03:51 PM
lucky13

awesome thanks BIGIFA :D shame we can't rename these mounts to something more meaningfull but that is great thanks
28-12-2010, 04:58 PM
Cirio

Quote:

Originally Posted by lucky13

awesome thanks BIGIFA :D shame we can't rename these mounts to something more meaningfull but that is great thanks

Hi,
you can name your mounts as you want.
I.E. you can name your 1st mount as harddisk1
and your 2nd as harddisk2.

First you have to create the mount point:

mkdir /media/harddisk1
mkdir /media/harddisk2
(you should do that by hand only the 1st time)

and then you mount your disks as usual:
mount -t cifs \\\\IPofWINDOWS\\sharename /media/harddisk1 -o username=user,pass=password
mount -t cifs \\\\IPofWINDOWS\\sharename /media/harddisk2 -o username=user,pass=password

Of course you can choose a meaningfull name!

Bye,
28-12-2010, 05:37 PM
kooleracer

Quote:

Originally Posted by Cirio

Hi,
you can name your mounts as you want.
I.E. you can name your 1st mount as harddisk1
and your 2nd as harddisk2.

First you have to create the mount point:

mkdir /media/harddisk1
mkdir /media/harddisk2
(you should do that by hand only the 1st time)

and then you mount your disks as usual:
mount -t cifs \\\\IPofWINDOWS\\sharename /media/harddisk1 -o username=user,pass=password
mount -t cifs \\\\IPofWINDOWS\\sharename /media/harddisk2 -o username=user,pass=password

Of course you can choose a meaningfull name!

Bye,

I have a USB external storage on my PC how can i let the azbox read that one?
28-12-2010, 06:13 PM
Cirio

Quote:

Originally Posted by kooleracer

I have a USB external storage on my PC how can i let the azbox read that one?

Well, you should share the folder on your external hd and the use the command above to mount it.
Give permissions to "everyone".
28-12-2010, 06:56 PM
kooleracer

As soon i alter rcS de Azbox wont bootup?
28-12-2010, 08:27 PM
Cirio

Quote:

Originally Posted by kooleracer

As soon i alter rcS de Azbox wont bootup?

Be sure to use a unix compatible editor like Notepad++

DO NOT use windows notepad it will screw up your rcS file.

Bye,
28-12-2010, 09:58 PM
lucky13

Quote:

Originally Posted by kooleracer

As soon i alter rcS de Azbox wont bootup?

i had the same issue even when I used a compatible editor, I then added the extra line below and that seemed to sort it...dont ask me why

CCcam
28-12-2010, 10:07 PM
lucky13

Quote:

Originally Posted by Cirio

Hi,
you can name your mounts as you want.
I.E. you can name your 1st mount as harddisk1
and your 2nd as harddisk2.

First you have to create the mount point:

mkdir /media/harddisk1
mkdir /media/harddisk2
(you should do that by hand only the 1st time)

and then you mount your disks as usual:
mount -t cifs \\\\IPofWINDOWS\\sharename /media/harddisk1 -o username=user,pass=password
mount -t cifs \\\\IPofWINDOWS\\sharename /media/harddisk2 -o username=user,pass=password

Of course you can choose a meaningfull name!

Bye,

thanks Cirio do I need to be in a specific dir when I use the mkdir command after I ssh in ? also would these directorys appear in the root of the media player file list window like the network mount and compact flash directorys I already have ?
29-12-2010, 12:09 AM
Cirio

Quote:

Originally Posted by lucky13

thanks Cirio do I need to be in a specific dir when I use the mkdir command after I ssh in ?

I usually type the mkdir command from root directory. I'm not so expert in linux so i'm not sure if you type the command from other directories the result will be the same.

Quote:

Originally Posted by lucky13

also would these directorys appear in the root of the media player file list window like the network mount and compact flash directorys I already have ?

Same as above: i'm not so expert to help you in this case..:001_07:

Bye,
30-12-2010, 01:48 PM
moicas3004

@Team

RC2 it's coming today or tomorow as it was posted?

Some very critical bugs to solve, like no wakeup from sleep, still some HD and SD drag image, newer w_izzard.py, video clear or video_off on exiting tv.

About recording and timishifting, it's working good in your test's?

Great work to all the Team and happy new year.
30-12-2010, 01:49 PM
moicas3004

@Team

RC2 it's coming today or tomorow as it was posted?

Some very critical bugs to solve, like no wakeup from sleep, VFD option isn't showing in menu, still some HD and SD drag image, newer w_izzard.py, video clear or video_off on exiting tv, can't initialize any disc in Hardisk menu ( always gives error ).

About recording and timishifting, it's working good in your test's?

Great work to all the Team and happy new year.
30-12-2010, 02:53 PM
massimo1167

I'm sorry, but I'm lost ...
I do not remember if the function for selecting a second audio in TV mode is active and fully working.
I remember, maybe one of the earlier versions, I have changed the sound, but now, the tests done on some movie channels on Sly Italy, it seems to me that the second language is not operated.

Same goes for the subtitles in TV mode, are already active or is one of the functions that will be implemented in RC2?
30-12-2010, 03:14 PM
sectorNOlimits

I think it is an issue at this moment and the only info I found is from chat-box on main site.

Quote:

mr3p on Thursday 30 December 2010 - 12:50:27
still missing audio on several channels. issues appears to be AC3 audio PID not being correctly recognized during transponder scan. if correct AC3 audio PID is manually entered using Dreambox edit, AC3 audio is fine.

but I don't exacly how to correct the settings.

SNL
30-12-2010, 04:03 PM
T33

Quote:

Originally Posted by sectorNOlimits

I think it is an issue at this moment and the only info I found is from chat-box on main site.

but I don't exacly how to correct the settings.

SNL

It says with Dreamboxedit, what do you not understand?

Show 40 post(s) from this thread on one page