Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

22-10-2010, 01:20 PM
Smudger

Quote:

Originally Posted by RogerThis

Smudger, I am just after doing a reinstall myself. I add the new image. ftp'ed the new em8634dvb.ko file over and rebooted. Then I change the Turner Conf to 28.2E and ran a manual scan on 28.2E and it started to find channels.
I cancel the scan and ftp'ed over my old lamedb to /etc/enigma2 and rebooted.
All the 28.2E channels were listed in the satellite section and were viewable.
Please try out my lamedb file and tell me how you got on.

Attachment 45960

I get nothing on the scan screen background goes black the progess goes up but get no services found. yes my dish is connected :)

I added you file via dreamboxedit I get no data on transponder error and a black screen this is on a FTA channel.:smash: if I only ftp it doe'nt work.

I'm missing somthing somehere

I set to single sat and simple settings.

I'm really struggling with this and thats not like me.

I'm a dab hand at swopping software thanks to the tool's available.

If I had a tin of paint I could have finished painting the boat on the beach. :)
22-10-2010, 01:25 PM
cescof

[QUOTE=

Certainly yes, but for the problems we already know ... only SD channels !

That's it!

Regards

Arci[/QUOTE]
Sorry fro newbie question. and thanks for answer.. but wich problem?
22-10-2010, 01:31 PM
kebien

Quote:

Originally Posted by The_Ripper

@all
Just info:
Fixed DVB-S2 tunning for cx24116.

Still working for diseqc problem.

Stay tuned ...

I still on hold waiting for this.
The fact is I want to test some dvb-s2 in 4:2:2 HD channels in order to report to you guys if flags are correct for decoding those.
Thanks

In another note,is it possible to record any of the channels reportedly working?
Or demux for recording is not worked on yet?
22-10-2010, 01:45 PM
RogerThis

Quote:

Originally Posted by Smudger

I get nothing on the scan screen background goes black the progess goes up but get no services found. yes my dish is connected :)

I added you file via dreamboxedit I get no data on transponder error and a black screen this is on a FTA channel.:smash: if I only ftp it doe'nt work.

I'm missing somthing somehere

I set to single sat and simple settings.

I'm really struggling with this and thats not like me.

I'm a dab hand at swopping software thanks to the tool's available.

If I had a tin of paint I could have finished painting the boat on the beach. :)

I had the same problem there with the black screen. I tried to turn off the box with the switch at the back, but that didn't help. But then I restarted using the menu and the channels came back on. See if this helps!
22-10-2010, 01:50 PM
MickeySa

Astra 1M (19.2E) - 12382.50 H - Txp: 99 - Beam: Astra 1M DVB-S2 (QPSK) - 27500 9/10

ESPN America HD

DVB-S2 Transporder scanning fixed :)

Code:

(0)fe event: status 1f, inversion off, m_tuning 2 OURSTATE: ok no version filtering 0000: 00 00 00 00 00 00 mask: ff 00 00 00 00 00 mode: 00 00 00 00 00 00 + 1/1 TID 00 done! got pat got pmt -2 no version filtering 0060: 02 00 75 00 00 00 mask: ff ff ff 00 00 00 mode: 00 00 00 00 00 00 no version filtering 0011: 42 00 0b 00 00 00 mask: fb ff ff 00 00 00 mode: 00 00 00 00 00 00 + 1/1 TID 02 done! got pmt 0 no version filtering 0061: 02 00 76 00 00 00 mask: ff ff ff 00 00 00 mode: 00 00 00 00 00 00 + 1/1 TID 42 done! got sdt 0 SDT: ONID: 0085 SID 0075: name 'Sky 3D', provider_name 'SKY' CA 1833 SID 0076: name '.', provider_name 'SKY' CA 1833 SID 0077: name 'ESPN America HD', provider_name 'SKY' CA 1833 SID 0078: name '.', provider_name 'SKY' CA 1833 got pmt -1 channel done! FE_GET_FRONTEND failed (Operation not supported) no channels left to scan. 1 channels scanned, 0 were unavailable. 1 channels in database. ---- saving lame channel db saved 123 channels and 2517 services! scan done!
22-10-2010, 01:58 PM
The_Ripper

@kebien

Quote:

In another note,is it possible to record any of the channels reportedly working?
Or demux for recording is not worked on yet?

Sorry not yet, that part of code isnt coded yet, we are doing now fixes regarding tuner for cx24116, and finally for p+ users can try too. So this code will be added l8er.

Regarding first note, we will try tonight to release this fix.
22-10-2010, 02:19 PM
Smudger

Quote:

Originally Posted by RogerThis

I had the same problem there with the black screen. I tried to turn off the box with the switch at the back, but that didn't help. But then I restarted using the menu and the channels came back on. See if this helps!

Still can't get this to work.

Bugging me now been trying for 5 hours, yes 5hrs.

somthing is just not connecting for me.

maybe I'm missing some setting have tried a few.

load e2
change to new drive I have tried either changing to new or not still the same outcome.

via setup tuner config set tuner to simle single astra 28.2
send diseqc = no

manual scan scan type = single sat network search = yes

then ok

search performed but no services found.

if I add settings manually is the same except I see no data on transpond message. (timeout reading pat)

ANY Ideas
:(
22-10-2010, 02:21 PM
RogerThis

Quote:

Originally Posted by arcibald

Once these are installed, you just have correct the path for the file CCcam.cfg:

SGC_menu:
From SGC panel installed the CCcam 2.14 and go to the correct path and the environment (-dC /etc/CCcam.cfg) in the startup script CCcam_2.1.4.sh:

/usr/bin/CCcam_2.1.4
/etc/CCcam.cfg
/usr/cams/CCcam_2.1.4.sh

After install "enigma2_plugin_sgc_menu_latest_m ipsel.ipk" I can't find the file CCcam_2.1.4.sh.

And there is no "cams" directory in /usr/

How can I find the CCcam_2.1.4.sh file?
22-10-2010, 02:34 PM
RogerThis

Quote:

Originally Posted by Smudger

Still can't get this to work.

Bugging me now been trying for 5 hours, yes 5hrs.

somthing is just not connecting for me.

maybe I'm missing some setting have tried a few.

load e2
change to new drive I have tried either changing to new or not still the same outcome.

via setup tuner config set tuner to simle single astra 28.2
send diseqc = no

manual scan scan type = single sat network search = yes

then ok

search performed but no services found.

if I add settings manually is the same except I see no data on transpond message. (timeout reading pat)

ANY Ideas
:(

Could you try this lamedb instead and reboot? Let me know how you get on.Attachment 45966
22-10-2010, 02:35 PM
andriorn

@The_Ripper
Any clue on why problems on astra 28.2?
Does not matter if i search for channels or load a channel list from Dreambox they work for 10min up to 30min and then stops working picture freezzes and box becomes slow and stops giving picture on FTA channels?
22-10-2010, 02:58 PM
Smudger

Quote:

Originally Posted by RogerThis

Could you try this lamedb instead and reboot? Let me know how you get on.Attachment 45966

I get service unavailable check configuration.

after chack and setting I now get

tune failed

well the box won.

I'm off back to 5020 it was good what I saw. Shame I could'nt work out my problem.
22-10-2010, 03:00 PM
The_Ripper

@andriorn
I and MickeySa few times allready told that STC timer(clock) inside Sigma isnt activated for audio/video sync over PCR info for SAT channels, so audio/video start getting lost.

It will be fixed as we progress fruther.
I cant give you people everything at once. Code are huge, plus I am working without Sigma company support so I am stuck with understanding how everything work.
22-10-2010, 03:00 PM
arcibald

Quote:

Originally Posted by RogerThis

After install "enigma2_plugin_sgc_menu_latest_m ipsel.ipk" I can't find the file CCcam_2.1.4.sh.

And there is no "cams" directory in /usr/

How can I find the CCcam_2.1.4.sh file?

Before ...you must entry in SGC Menu and downloading CCcam 2.14 ... After you will find the paths and applications ...

Only the other plugin glasssysuti ... already have inside them ...

Regards

Arci
22-10-2010, 03:14 PM
chrissat

Quote:

Originally Posted by The_Ripper

@andriorn

I cant give you people everything at once. Code are huge, plus I am working without Sigma company support so I am stuck with understanding how everything work.

Thanks. :respect-054:

I know you've been working really hard to get things this far and an excellent job you have done. :respect-037:

I know we're all really excited, especially with the amazing progress you have made recently. We just need to have more patience and let you get on with the work you are doing.

You've more than shown you are the right man for the job. It'll be better if we just let you work to your own schedule than ask you to work to ours.

Soon enough we'll all have what we want.:respect-064:

A bit more patience my friends, we're nearly there. :respect-037:
22-10-2010, 03:20 PM
moicas3004

it would be good to create a zone in the forum for , setting, satellites, channels, plugins, skins, for this E2 image. The guys are placing everiting here and when we want to find someting we have to go to alot of pages.
22-10-2010, 04:04 PM
VAJX

read this...
https://www.satpimps.co.uk/showthread.php?t=139902
22-10-2010, 04:21 PM
moicas3004

Quote:

Originally Posted by VAJX

read this...
https://www.satpimps.co.uk/showthread.php?t=139902

I knwo that but, thats info for e2 image.

I was saying to create a topic zone.
22-10-2010, 04:22 PM
[0_o]

Hello comunity!

Well... I have posted this on pr2 thread, but this one have more views and maybe more people could help me here.

I think I need just a little help. I'm trying to find some source code for VFD display from another receivers that use enigma2, but I cant find it correctly I think. For VFD display, I should look inside Plugins in python folder, right?

Thanks
22-10-2010, 04:23 PM
hfmls

Quote:

Originally Posted by moicas3004

I knwo that but, thats info for e2 image.

I was saying to create a topic zone.

Yeah i think it's time too :)
22-10-2010, 04:46 PM
T33

Quote:

Originally Posted by [0_o]

Hello comunity!

Well... I have posted this on pr2 thread, but this one have more views and maybe more people could help me here.

I think I need just a little help. I'm trying to find some source code for VFD display from another receivers that use enigma2, but I cant find it correctly I think. For VFD display, I should look inside Plugins in python folder, right?

Thanks

Is is enigma2/lib/python/Components/Lcd.py from http://dream.reichholf.net/pydoc/html/files.html you are looking for?

Show 40 post(s) from this thread on one page