I can't also play any of my files using USB.
Screen is black and time remains on 0:00:00.
On YouTube the same problem.
I have an Elite.
Printable View
I can't also play any of my files using USB.
Screen is black and time remains on 0:00:00.
On YouTube the same problem.
I have an Elite.
My box (Elite) never had hardware acceleration activatedQuote:
Originally Posted by richy18
And the clock is crazy ( ~ 2 times too fast ! )
Code:system type : Sigma Designs TangoX
processor : 0
cpu model : MIPS 4KEc V6.9
Initial BogoMIPS : 293.88
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available
System bus frequency : 80000000 Hz
CPU frequency : 80000000 Hz
DSP frequency : 80000000 Hz
Sattommy
One more thing about Media Player
When we are in the movies dir, for each RCU click the onscreen cursor goes 2 spaces.
In the list, for example, im in movie 1 and i press RCU to go down to movie 2 but the cursor in the list goes to movie 3. Again i press for movie 4 and the cursor goes to movie 5.
Can you check this please, and the failure to play movies in usb HDD. Is just what is missing for daily use of this great Firmware.
I turned off my Azbox yesterday, and today when I turned it on it just kept rebooting itself.
Then I remembered that I had disconnected my network adapter also, when connecting this, the Azbox booted as normally. So it seemes that the Azbox refuse to boot if network is not present. (I have cccam with autostart, so maybe that can cause problems if server not found)
I also experienced that the HDMI output sometimes is pinkish, and needs to reboot to get it normal.
I did a software update from the menu, and it did download and install two packages. After this it tried to reboot itself, but hung, so I had to restart it manually.
After this update the zapping seemed a lot faster here:) Any idea about what's in that update?
Many people with premium and harddrive have probably, like me, a lot of downloaded movies on their harddrive from earlier.Quote:
Originally Posted by sattommy
I also only get a black screen when trying to play mp4 or avi files from harddrive.
LoL... that's REALLY interesting... so far, no one reported of any E2 server for AZbox with live updates. What menu have you used for "software update"?Quote:
Originally Posted by amyren
I've done these updates too...Quote:
Originally Posted by sattommy
Zapping speed:
FTA
SD to SD: ~2.8 - 1.8 sec (very different)
SD to HD: ~2.5 sec
HD to HD: ~2.8 sec
ENCRYPTED
SD to SD: ~5 - 6 sec
SD to HD: same
HD to HD: same
I cannot see any speedup.
All measures are with channel up/down button. If i go to the channel list, choose a new channel and press ok it's faster ( FTA sometimes < 2 sec).
All in all the zapping speed is comparable with my Dreambox800HD. With newnigma2 Image it's as slow too...
-> Menu button on RCUQuote:
Originally Posted by dvlajkovic
-> choose "Settings"
-> choose "Software management"
Just the info.......
If you open the box and go to sleep, when you wake up, the channel will already lose sync(no sound) and the picture is always jitter.
Actually, it starts to lose sync after a couple of hours.
Personally, I think that the previous firmwares( .29 and .31) are more stable than this firmware.
I agree with you. I've only tried 1.0.25 and it has better stability than this one.It worked smooth, with sound problem but this release is full of bugs.Quote:
Originally Posted by gadgeteer
Hi, I just want to respond to this.Quote:
Originally Posted by richy18
I too had problems with slow zapping using this release, however after I did a full service scan and opened the channel(s) one time after scan, zapping is MUCH better I would say around 1 sec. Also this seems to fix the audio problem I had before where no audio could be heard. Maybe the pid settings has been screwed up when just transferring a list.
I find it odd how the service scan is done, I have a USALS system with ~12 sat positions chosen. The scan would jump from 39e to 15w just to search some transponder later to switch to a new position and search a transponder there, this making the dish go back and forward. Is this how the scan works on other E2 systems with USALS (to me it seem a bit odd not to search one position/sat at a time).
I can't get internal (hdd) or external USB2 (hdd) video files to work (avi,mkv,mp4,etc) on this version though.
Best regards!
Quote:
Originally Posted by richy18
system type : Sigma Designs TangoX
processor : 0
cpu model : MIPS 4KEc V6.9
Initial BogoMIPS : 293.88
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available
System bus frequency : 200250000 Hz
CPU frequency : 300375000 Hz
DSP frequency : 300375000 Hz
Strangely just rebooted box and its reset the time and its spot on now dont know why it didnt before assume it will start to lose or gain? And no hardware acceleraton is not enabled!
I have an usb drive 500GB 2.5" , and i can't format it. I get an error that say can mount the drive.
audio issues still present here as well. some channels no ability to change voume. tuner config aection has strange (repeatable) bug where it prompts if you want to delete satellite. channel zapping subjectively not as fast as 031. manual dish pointing section also buggy. even with all of the above, it has far greater potential than factory firmware. big thanks to the_ripper and team for work thus far.
I did it from the menu > setup > software management > software updateQuote:
Originally Posted by dvlajkovic
But I must correct myself a bit, I thought the update made my zapping faster.
It was the reboot that did that. I noticed that for encrypted channels zapping speed slows down a lot sometimes after running the box a bit.
But another thing from the software management > manage extensions
I tried install some plugins for testing and found that the plugin Cccam Info 1.3
and the Google Maps are working.
Google maps is of limited use, since it doesnt seem to respond to any scrolling, but this could be due to that the RC keys are not mapped for this plugin.
But the search function and the zoom setting from the menu works, so you should be able to display a map of the searched adress.
Also the IMDB plugin runs, and it does search for movie titles, but selecting one from the found list will result in a failed download. But I think this is the plugin itself that needs updating, because I get the exact same behaviour when running this plugin on my DM800.
What not to try to download is the DVD player plugin, this will install itself in the menu, but will crash the Azbox when trying to use it.
Also downloading the MyTube plugin is not recommended, as it seemes to break the built-in youtube plugin.
Most people have noticed that the volume up button doesnt work...
Anyone know how to reset the volume setting again if you have lowered the volume to much and are stuck with almost no sound?
Used until repaired, WEB Azbox and you can control the volumenQuote:
Originally Posted by amyren
http://img98.imageshack.us/img98/3779/volumeno.jpg
@moderators:
Now this thread reached more than 140 pages!!!
For my humble opinion it make not sense to continue the same thread that will be more and more difficult to read and to find the correct information.
There will be risk of increasing the possibility of people asking the same question as they cannot read the complete discussion.
Please, I'd like to suggest the moderators to close this discussion and open a new discussions for each of next new releases. We could simply start with the discussion for "RTi core BETA 1.0" with the release note and same for next. etc.
What do you think?
That doesn't work for me. I've made a full service scan (found ~5000 channels on four satellites) but it is as slow as before :frown:Quote:
Originally Posted by digihoe
Yes, I can confirm that but you have to install webif before.Quote:
Originally Posted by fundidun
I've found it here:
https://www.satpimps.co.uk/showthread.php?t=139902
by satman72
to solve the bug into volume up, replace the file ActionMap.pyo (coping it from previous beta ver.) into /usr/lib/enigma2/python/Components/
http://rapidshare.com/files/432728035/ActionMap.pyo
Someone can mount a usb harddrive with the menu configuration?
Multiupload is better
Download can not be started.
Too many parallel downloads from your IP address or the limit for free downloads has been reached.
This is usually a temporary problem and can be solved by retrying the same URL at a later time or by becoming a RapidPro-user.
Do you want to upgrade to RapidPro?
ActionMap Download link
http://www.mediafire.com/file/5f4c8h.../ActionMap.rar
Great.Quote:
Originally Posted by antonis13
BTW this also seem to fix the bug that makes the remote take 2 steps up / down in some menues.
could you select the hdd on the media player, because it does notQuote:
Originally Posted by dvinko
work with me every time I use my remote to select the internal hdd he switched to another folder.I also have a azbox premium with internal HDD?
AzUP v1.2.5 by telesat
Code:whats new :
* Device - choose where You want to install Enigma : on internal DOM , on USB where is also patch.bin file or in Internal HDD
* Advanced options :
- Format Extended partition - if You are using the DOM bigger than normal one >256MB , AZUp automatically create also extended partition, if this option is checked , also that partition wll be formatted , this use for first installation on HDD, but on future installations this should be unchecked, or turned off , to prevent formatting rest of the space on HDD with Your files, movies, music...
Consider same if you are using bigger DOM (>256MB) , for Installation on USB stick always is formatted extended partition.
- Copy kernel - if You are sure that Kernel is not changed for the version of Enigma 2 which You are going to load , You can turn OFF this option to speed UP process of loading new Enigma 2 in Your receiver.
* DHCP ON/OFF - If You don't have active DHCP server on network, Turn ON DHCP that AzBox can get an IP (and also to show that IP on VFD)
When You activate DHCP , if AzBox or some other device which is located on same LAN ask for Network parameters - In field above button DHCP ON/OFF You will get IP address which is leased to that device.
If You are loading Enigma on ULTRA model which is without VFD , my suggestion is that You use crossover network cable and that You connect Ultra directly to Your PC/Notebook on which You are running AZUp, which will make You sure that just ULTRA is getting IP address from AZUp - which AZUp will show You above DHCP ON/OFF button
* Find IP in LAN - searching for accessible devices with IP on LAN group, in which is also located Your PC/Notebook where is AzUp running (mask 255.255.255.0)
This can help You on work with Ultra model if he is connected on LAN where is already running DHCP Server ( As Ultra model missing VFD ).
Bug Fix :
* Fixed problem with returning to Official Firmware
RTi core 1.0.1 BETA
Code:What is new :
- Fixed Audio sync ( now all should be ok ).
- Fixed HDMI Hotplug
- Fixed Web Interface
- Fixed Volume UP
More to come :
Work on recording and subtitles, Online software update ( Drivers and System components )
Currently under work :
- Fix for Multimedia
For more information visit :
http://www.azbox-enigma.eu
Soon Bug track !!!
Download : www.azbox-enigma.eu
rgs,
thank you very much :)
bug track system would be great! If some user reports repeated bug without checking list first should get a warning! :)
btw: i just hope epg works now and clock (isn't fast) as it used to be :)
i can't watch tv without epg, that's the only thing keeping me from using it :P
THANK YOU TELESAT,THE_RIPPER,MICKEYSA, SATTOMMY AND ALL THE REST NOT FORGOTTEN.
after a few minutes testing i gotta say only EPG is still broken!! Could it be because clock is so so fast ? Clock hour is always wrong :S
STC driver is simply perfect The_Ripper.
Well... 99,99999999% perfect.
I got 1 little problem, after reboot we get image and no sound, but if we change channel all goes perfect!
So that's only thing "wrong" after boot, no sound, if we change one time channel problem disappears till next reboot.
i still can't work this out, how did u set this up in dm800?Quote:
Originally Posted by [0_o]
i chose ZON/MEO from XMLTV list, and then what? :)
i did this to setup CrossEPG:
Enigma2 installation (dreambox)
with a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line
LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2
add this line
/usr/crossepg/crossepg_epgmove.sh
After reboot i went to download manually, then i reboot again, and EPG fully working.
:) :) :)
Now only clock gets crazy :)
Running RTi Core 1.0.1....
Don't you guy face jitter in watching HD channel?? Does it run smoothly?? I have this problem since using RTi Core. Comparing to previous firmware( .31 or .29), when I got sync(sound on), the HD channels ran just perfect.
Thanks......
Yeah, I have the same problem. And only with the HD channels.Quote:
Originally Posted by gadgeteer
maybe you could run a local ntp client every 5 minutesQuote:
Originally Posted by hfmls
Nice job ripper team things will only get better. we are lucky you have taken on the job to make the AzBox better.
have a few beers or 3 team.
That's not a bad idea actually. Could be a good work around.Quote:
Originally Posted by sattommy
crossEpg is working !!
I installed cooltvguide 2.0.11 and it works perfect .
Webinterface ok.
And for now no freeze when zapping on hd_channels.
:respect-023: to The_ripper and team :cup-006:
thanks for the fast update .
But now At work Can't testing .
i see hfmls test report , and i think we have better version now .
Graet .
The attached ntp ipk might work.Quote:
Originally Posted by sattommy
does the RF out work in any way with some plugins we can install?
thats a feature i didnt want to loose with the use of the great E2 for azbox by the Ripper and his team