@hfmls
is that works good for you now?
cheers
@hfmls
is that works good for you now?
cheers
i tested. it work's better...really better. much more stable.
but i prefer mbox.
i tried this trick and its not better. Still same problems. sometime opens, sometimes doesnt. HD channels are still one big problem.
Mbox is really great but i cant find any good server so...
Concerning the possibility to decrypt some channels:
- I have tested successful some keys with mgcamd, then copied these 3 files into /EMU/lib (Autoroll.key, SoftCam.key, Constant.cw)
- Edited cccam.cfg like this:
#DVB API: -1
################################# ################################# ##
# CCCAM 2.09 #
################################# ################################# ##
C: xxxx
################################# ################################# ##
################################# ################################# ##
SOFTKEY FILE : /EMU/lib/SoftCam.Key
AUTOROLL FILE : /EMU/lib/AutoRoll.Key
CAID PRIO FILE : /EMU/lib/CCcam.prio
PROVIDERINFO FILE : /EMU/lib/CCcam.providers
CHANNELINFO FILE : /EMU/lib/CCcam.channelinfo
################################# ################################# ####
# Other config settings #
################################# ################################# ####
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s or set port 0
#
SERVER LISTEN PORT : 17500
# server can give some info about server and client connections
# and cardinfo using telnet or webbrowser.
#
# Switch on/off access to info
# default is yes
#
ALLOW TELNETINFO : yes
ALLOW WEBINFO : yes
# The webinfo service can be protected with a username and password.
# This is switched off by default
#
#WEBINFO USERNAME : <username>
#WEBINFO PASSWORD : <password>
Etc.
I cannot see channels previosly opened with mgcamd. Please, what's wrong on my file?
Thank you
Make sure your file names are .Key and not .key and AutoRoll not AutorollQuote:
Originally Posted by MrKappa
I also suggest you use a trimmed down cfg file, copy this and your C line to a new file, let me know how you get on...
SOFTKEY FILE : /EMU/lib/SoftCam.Key
AUTOROLL FILE : /EMU/lib/AutoRoll.Key
PROVIDERINFO FILE : /EMU/lib/CCcam.providers
CHANNELINFO FILE : /EMU/lib/CCcam.channelinfo
STATIC CW FILE : /EMU/lib/constant.cw
SERVER LISTEN PORT : 17500
ALLOW TELNETINFO : yes
ALLOW WEBINFO : yes
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 0
OSD USERNAME : root
OSD PASSWORD : azbox
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : no
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : yes
EXTRA EMM LEVEL : no
NEWCAMD STEALTH : 0
I am trying out terrormans script
Ok now
Got it working.....
anyone knows why when i reboot i can connect with internet explorer ip:16001 and when pass 5 minutes i cant connect with explorer.
in firefox it's work 100%
to me happens the same than explorer i cant connect but reboor and yes during 2 minutes. im going to test change 16001.
Code:New: v1.6
[+] Fix -> Change Lang
[+] Add -> Unistall Function
[+] Add -> Module.seq
-----------------------------------
@kanber_kav
can u tell me pls, how u fixed segfault at CCcam 2.1.2? Tried so many things, nothing.
Would be great.
cu
kid
Azboxhd install debian.Quote:
Originally Posted by kid
and runing cccam 2.1.2
Hello', no success so far! :(Quote:
Originally Posted by gtg60
But many thanks for your help.
I have created a new empty cccam.cfg as you suggested.
I confirm to have on /EMU/lib the following files:
AutoRoll.Key, SoftCam.Key. constant.cw, CCcam.providers, CCcam.channelinfo (everything written with proper letters)
I have changed the server port of course.
I confirm that I use only "dvbapiCAS" as EMU.
I'm still trying some other combinations...
Thanks
@kanber_kav
I know, we're talking bout an installed debian, no chance for me, segfault.
Is it the cfg maybe, i took an old one and a new one, same result.
Sorry if this has been asked before, Could you please tell me how to stop this CCcam, because sometimes I need to stop this CCcam to use the Client CCcam (CCC version). Thanks.
for many channels HD to view, change CCcam.channelinfo and CCcam.providers and test .
for me i have watch many channel HD by this method .
@sami
use "killall" module in telnet . just
Whole package Platforma DV&HD on 9E is not decoded by This CCcam. However, it opens without problem on the client CCcam(CCC version).
very helpful tip ..thanksQuote:
Originally Posted by medmed
after other test , erase CCcam.providers and just put one nice
CCcam.channelinfo ,
for me i have add provider of NatGeo HD (french) and Eurosport HD (french) , and SCI FI HD (french) and Canal+ HD (french) and Ushuiai TV HD ,..
after that this channels it's open very well .
@medmed:
Can you pls post the "perfect" CCcam.channelinfo to clear HD channels?
Thx in advance...
cu
KJ
where we can find this files updated and for our az
SoftCam.Key
AutoRoll.Key
Ccam.prio
CCcam.providers
CCcam.channelinfo
https://www.satpimps.co.uk/showthrea...ers#post637300Quote:
Originally Posted by antrabe
Most of this can be found if you search.
ok thank you but i had this 2 files i need the other 3 im not sure if i can install any softcam key or any cccamprio or should be only for az
Any softcam for a Dreambox will do fine.
bonjour
you have 2 folder (lib, et dvbapiCAS)
put lib in /EMU
and dvbapiCAS in /EMU/OpenXCAS
put your C ligne in CCcam.cfg (in lib folder)
end .
attention :
-put for all files : Chmod 755 and Chmod644 for CCcam.cfg (in lib and dvbapiCAS).
- add CCcam.channelinfo in lib folder, and add your providers if not present in the CCcam.channelinfo.
- change this ligne :
by this :Quote:
LD_PRELOAD=/EMU/lib/libdvbapi.so /EMU/lib/ld.so.1 --library-path /EMU/lib/ /EMU/lib/CCcam.mipsel -dv -C /EMU/lib/CCcam.cfg &
in the dvbapi.sh (in dvbapiCAS folder).Quote:
LD_PRELOAD=/EMU/lib/libdvbapi.so /EMU/lib/ld.so.1 --library-path /EMU/lib/ /EMU/lib/CCcam.mipsel -dlsv -C /EMU/lib/CCcam.cfg &
CCcam 2.1.1 Azbox HD:
http://www.sendspace.com/file/gsa6w2
CCcam.Channelinfo :
http://www.sendspace.com/file/svlryt
CCcam.cfg like this :
********* by MedMEd for AZ-french-TEAM ************Quote:
#
C: host.dyndns.org port user pass no
C: host2.dyndns.org port user1 pass1 no
#
#
SERVER LISTEN PORT : 12000
#
DISABLE EMM : yes
#
MINIMUM CLIENT VERSION : 1.7.0
#
#DVB API: -1
#
CCcam 2.1.2 runingQuote:
Originally Posted by kid
azbox$ cd /DATA/hdb1
azbox$ chroot /debian
azbox$ mount -t proc /proc proc
azbox$ cd /var/bin
azbox$ ./CCcam.mipsel -d runing no problem
no change cccam.cfg
how to run CCcam 2.1.2 in elite model ?.
(in the method- lib and dvbapiCAS-)
Looking at a DM8000 then saw the AZBOX Premium, are you saying in this forum that given time the AZBOX will be able to function much like the DM8000 but for far less money?
well, not trying to "sell" the product, but yes. a couple of months, and yes. it has the hardware for that, and more.
Hmmm thats interesting because the DM8000 is very expensive I think I will look around for somone with stock of the new batch without need to mod the motherboard.
Thanks
Dale.
Script v1.7 Instalacion: E2-CCcam v2.0.4 Nativo AZBox HD
Bajar el fichero que adjunto y lo enviais por FTP al raiz de la AZ: /
Luego cambiamos los permisos: 755
Si lo haces por Telnet o SSH: chmod 755 /cccam
Ahora ya solo nos queda arrancar el script: /cccam
Seguir los pasos de instalacion y listo, en un plis instalado y configurado, esperando que le metas la primera C o F
Salu2
Proximamente: v1.8
[+] Add Multi-Installation
Se prepara una nueva version, con la posibilidad de instalar CCcam v2.0.4 o CCcam v2.1.1, o viceversa.
[+] Add Multi-Update
Se prepara una nueva version, con la posibilidad de actualizar desde CCcam v2.0.4 o CCcam v2.1.1, o viceversa.
Nueva: v1.7http://img338.imageshack.us/img338/186/89150181.png
[+] Add Install CCcam v2.0.4
Se añade la instalacion de CCcam v2.0.4
[+] Add Update CCcam v2.1.1 to CCcam v2.0.4
Se añade proceso de actualizacion.
-----------------------------------
Cambios: v1.06
[+] Add unistall
Se añade proceso de desinstalacion, para la peña que no quede convencida.
Cambios: v1.05
[+] Add new config file: /EMU/OpenXCAS/module.seq
Se añade el fichero module.seq para que se quede configurado el API, solo con meter la C en el CCcam.cfg y reinciar la AZBox HD sera suficiente.
[+] Lang EN|ES|FR|DE|AL|NO|IT
Se añaden los idiomas que faltan, proximamente algunos mas.
http://img338.imageshack.us/img338/8769/47989595.png
http://img338.imageshack.us/img338/1195/64316889.png
I have installed CCcam_2.1.1_Azbox_HD it works as client.I have a irdeto ver 4 card local card it is not getting read.It works in my DM500s how do i make it work in Azbox elite...
You need to add newcs and configure it for your card.
Any idea which version of newcs works with the irdeto cards? I read somewhere the latest one don't work...Quote:
Originally Posted by tinos
what have I missed?
Question what is the advantage of changing CCcam v2.1.1 down to CCcam v2.0.4 I've done it and it works, but would like to know what is the benifit if any?
I'm guessing less cpu usage and maybe quicker due to less functions.
any ideas.
Smudger
Quote:
Originally Posted by Smudger
v2.0.4 with bug exists that allows for adding a green card from your newcs
it allows u to use mpcs, to make your nagra3 local card appear as hop0
Also less ecm cache errors from newcs... really good!
package libraries and cccam is tinos, tested
destinations thanks, good job