http://img440.imageshack.us/img440/4673/75976983.th.png
I bet there are some non-IT people on this forum, who are not too familiar with Linux etc.Quote:
Originally Posted by kanber_kav
I bet a few will need some simple, straight-forward advice how to use the complete package that K_K put up in this thread... So... Here is how I did it...
Following The_Ripper's great work and advice, I used K_K's version of T_R's files, and I installed the package like so:
1) I downloaded cccam-azbox-2.1.1 [= "emu.rar"] archive from K_K's post.
2) I decompressed it by right clicking on it [using 7zip -> "Extract here"]. I got EMU folder and in it 2 sub-folders:
-libs
-OpenXCAS
2a) I went into the libs folder and edited CCcam.cfg to put the details of my peer's server, as advised in the file itself [added this line under #C: line in the file]:
2b) I went into OpenXCAS folder and edited the following files [in order to make them correspond to what I have in my AZbox HD, so you need to do the same in accordance with your setup]:Quote:
C: peer.DynDNS.something port username pass
-module.seq [this one is a must]
-openxcas.conf [I am told this one isn't a must but I did it anyway... ;)]Quote:
dvbapiCAS
#MboxCAS
#mgcamd
#incubusCamd
#CCcamCAS
#MultiCAS
#newcs
#SCDXCas
3) I used FileZilla to FTP to my AZbox HD receiver and copied the lib folder into the folder EMU, then went into it and gave rights, i.e. CHMOD -> 755 to all the files inside.Quote:
[modules]
count = 7
active_auto = true
active_1 = dvbapiCAS
active_2 = MboxCAS
active_3 = incubusCamd
active_4 = MultiCAS
active_5 = CCcamCAS
active_6 = mgcamd
active_7 = newcs
[module_1]
name = dvbapiCAS
path = EMU/OpenXCAS/dvbapiCAS
daemon = emu_module
version = 0.1
[module_2]
ap= Yes
name = MboxCAS
daemon = mbox_module
wait=13 sec
version = 0.6_10
[module_3]
name = incubusCamd
path = EMU/OpenXCAS/incubusCamd
daemon = incubusCamd.sh
version = 0.55
[module_4]
name = MultiCAS
daemon = emu_module
version = 1.57D-4T11-6B
[module_5]
name = CCcamCAS
daemon = cccam_module
version = 1.00
api=No
wait =10sec
[module_6]
name = mgcamd
daemon = mgcamd
version = 1.32
# argument = -a 3
[module_7]
name = newcs
daemon = newcs
argument = -nd
version = 1.6
xcasapi = FALSE
4) Then, I copied the content of the OpenXCAS folder from my HDD into the AZbox HD OpenXCAS folder. I went into the folder itself and gave CHMOD to 755 to the module and .sh file.
5) I didn't even have to reboot, I just restarted all the EMUs [via the Fast Forward button -> yellow button], then just the dvbapiCAS with the OK button.
It worked!:respect-023::respect-023::respect-023:
:respect-051:
I tested this using payserver and it works beautifully.
Great grat work the_ripper!!!!!! and thanks to kanber_kav for scripts!
i have to run sh dvbapi.sh manually via telnet...dunno why. i have all correct.
working now
Hi
I can run script from prompt no probs but can not via Openxca pannel. *** Forget this I now have it working just zapped chanels *******
Ths is one very happy Azboxer got the New card HD working.
hello friends...
seca ok 100%
nagra 3 ko...
nagra 3 ok here.
hispasat
Hi People have just tried this with a C line and N line and seems to be working really well.
Special thanks to all who have worked hard to get to this stage. Just about to sit down and watch the Ashes (Cmon Aussie !!)
in principle by astra channels in the D + hd
I was not open,
I testing
RealCCcaminfo very soon :D
nagra 3 ok testing with new cline e 100% ok
thank you :)Quote:
Originally Posted by kanber_kav
can u use arial bold font please?
i use that in azbox hd menus, and it's the most clear font i ever used in azbox hd :)
New Uk Sly white card and HD Ok on C line and paid server
Can someone pls report about stability and auto-reconnect??
Thx in advance!!
cu
KJ
it's stable. sometimes it has some flaws. but nothing that can't be fixed :)
what do u mean autoreconnect?
Hi guys,
I have deleted all other cams I start cccam via telnet and try to start dvbapi but get this error I have re-booted several times and also started from scratch
any ideas are appreciated
Created CaPMT Socket
Creating openxcas API message thread ...
Thread Started
Creating response thread ...
Thread Started
Waiting for connection ...
Quote:
Originally Posted by enrico001u
try changing channels
tried that mate
tried sky uk,sky it and nova etc..
cccam works even if device wakes up after stand-byQuote:
Originally Posted by kleinerjunge