One question we know some drivers (DVB-T2 and DVB-C2) if you are in it.
Printable View
One question we know some drivers (DVB-T2 and DVB-C2) if you are in it.
yes, it's HDD.
your good to go then. because enigma2 only partitions DOM.
what do u mean?Quote:
Originally Posted by bawin
for now we only have dvb-s2 driver.
that will be in future.
so,Quote:
Originally Posted by Smudger
what will happen if i install e2 ?
will these folder be erased?
will they be mounted by e2 afterwards?
that isn't a folder.
probably will be mounted by enigma2.
but if not, after u revert to original firmware, HDD will remain the same.
I already know that but I say if there will also be support for other tuners.
the_ripper already said yes, but ONLY after tv part is stable enough. and dvb-s2 driver is stable enough.Quote:
Originally Posted by bawin
So far...seems pretty good to me. :)
Nothing there if it is stable enough enigma 2.
And ah hope you take my other tuner for cable.
And keep it up and improving this enigma 2 greetings to the whole group.
hfmlsQuote:
Originally Posted by hfmls
I have not var/bin folder only bin
Do any of you can do anything to draw up and put on the forum that I and maybe even someone could also throw in cash E2 AzBox and try how it works. Of course if you can and Cccam. Rippers and team for this job all cards, and a big thanks.
enigma2 maybe it is usr/binQuote:
Originally Posted by antonis13
CCcam is for mips platform so the same for dm800, is it?Quote:
Originally Posted by The_Ripper
When (approximately) new E2 CAS working release?
BIG THANKS To AzBox_E2 team.:bravo-009:
PS:
Since each E2 image has a name given by the team, which will be the name of the image and which is the team's name? :grouphug:
I would suggest RIP Enigma2 ;)
@The_Ripper: Have you used a new kernel and rootfs for this new version? Booting with the old kernel /dev/fb0 is missing and loading of em8634dvb gives
em8634dvb: disagrees about version of symbol dvb_unregister_adapter
em8634dvb: Unknown symbol dvb_unregister_adapter
So enigma2 is not starting.
Confirm that the feed was in 4.2.2.Quote:
Originally Posted by [0_o]
Other feed :respect-054::respect-054:
Signalé par Phill le 20/10/2010 à 22:12
Eutelsat W1 (10.0°E)
Fréquence: 12742 - Pol: H - SR: 6111 - FEC: -
Catégorie: Sport - Basketball
Transmis en: MPEG-2 4:2:2
Infos: EL:Virtus Roma-Brose Basket
http://s3.postimage.org/Qb4kA.jpg
Hello !
Tested new E2 with premium.
19.2 and 28.2/28.5 primefocus with superjack positioner.(controlled by remote controller, azbox with simple config)
HD-channels on 28.2 (BBC-HD /ITV-HD) can be found. Those are not DVB-S2 .
BBC-i on 12441 V won't tune, but I am not sure if it's because bad reception conditions or system. Usually at this hour it should work. This frequency is special , the channel usually show up as stream0 to stream5
Media player plays starwreck xvid. But with old .ts recorded with various versions of usb stick/dm500 firmware during last 5 years nothing seems to work.
Zapping is ok. there seems to be some random slowness, but the basics are ok.
I have internal hdd and usb hdd connected.
If external usb hdd is connected when booting , mediaplayer will mount it as hdd. My internal hdd is a mess at the moment, so I can't tell what can be done with E2 and what not.
We are quite close to real E2 on AZ :respect-040::respect-040::respect-040::bravo-009::woot-035:
Thank you my friend @bakoko! :respect-054:Quote:
Originally Posted by bakoko
So... we can say 4:2:2 are working on E2 too! :bowing-036:
can't wait for cccam opening channels :P :P :P
In time of course, but those of us with Premium+ are still waiting for DVB-S/S2 standard tuner, so be patient. :rolleyes:Quote:
Originally Posted by bawin
Let the guys get the basics working properly first! :)
@ The_ripper or who can help.
Is phoenix working as a cardreader or there is no support for it?