Hello
Run the new version with the CI-Module?
Is it possible to record the FTA channels?
Printable View
Hello
Run the new version with the CI-Module?
Is it possible to record the FTA channels?
Goodmorning
Can this new version make my dinner and keep the children quiet.
Thank you to all that have created this great work. I have 1.0.25 installed and seems to have a lot of potential. I have great hopes for this project but I can not test because I am over here at 82W and there is no way to add a sat or change transponders or lnb settings of the ones listed. If the sat list can be expanded in the near future it would be greatly appreciated. Thank you. :hurray:
For info
It was not easy to do update
namely the update from the old E2 to the new E2 version to me was not possible.I tried several times and with different USB sticks.
After update with the original FW and after with the new E2 version was OK.
The biggest plus for me is that the HD (I have test on einfestivalHD 19.2 E) have better picture quality than the original FW.
: Tiszteletben-055:
diseqc not run;
ca not run;
hd (mkv) not run;
Hd channel ok;
sd channel ok;
divx avi ok;
thanks E2 Team;
Could you someone confirm that HD channels works on dvb-s2 transponders aswell ?
Btw big thanks for outstanding new E2 release!
As a member of azbox community who follows this E2 thread but cannot installl and try it on his own azbox (because it's beeing used heavily by my family and I cannot interrupt its usage) I need some reviews from the guys who tried this.
- How is the picture quality (ie. SD channel upscale performance or HD quality) of this E2 release when comparing it with old official firmware?
- Are there any channel switch speed with FTA channels and channel browser responsiveness improvement?
Thanks for sharing your opinions..
And of course great thanks to E2 Team !!!
Can anybody confirm that the satellite scan is working or not?
Signalé par Phill le 20/10/2010 à 12:52Quote:
Originally Posted by MickeySa
Eutelsat W1 (10.0°E)
Fréquence: 11005 - Pol: H - SR: 6111 - FEC: -
Catégorie: Sport - Football
Transmis en: MPEG-2 4:2:2
Infos: ACL:Seongnam Ilhwa-Al Shabab
http://s1.postimage.org/QPg30.jpg
:respect-055::respect-040:
Wireless for Premium and Premium+
Thanks to joseba for providing and compiling driver !
Download archive attached to my post, unzip it, and transfer whole folder wlan by FTP to /tmp folder on Your receiver
Connect to Your receiver by telnet and execute this commands :
mkdir -p /etc/Wireless/RT61STA
cd /tmp
cp /tmp/wlan/rt2561.bin /etc/Wireless/RT61STA/
cp /tmp/wlan/rt2561s.bin /etc/Wireless/RT61STA/
cp /tmp/wlan/rt2661.bin /etc/Wireless/RT61STA/
cp /tmp/wlan/rt61sta.dat /etc/Wireless/RT61STA/rt61sta.dat
dos2unix /etc/Wireless/RT61STA/rt61sta.dat
cd /lib/modules/2.6.22.19-19-the_ripper/kernel/
mkdir drivers
cd drivers
mkdir net
cd net
mkdir wireless
cp /tmp/wlan/rt61.ko /lib/modules/2.6.22.19-19-the_ripper/kernel/drivers/net/wireless
modprobe rt61
cd /tmp
wget http://oozoon-dreamboxupdate.de/open...-r5_mipsel.ipk
ipkg install wireless-tools_29-r5_mipsel.ipk ( If error appear dont worry :) )
ifconfig ra0 192.168.1.22 up ( my gateway is 192.168.1.1, so i put ifconfig ra0 192.168.1.22 up )
iwlist ra0 scanning ( this will list available networks in your range )
output will be something like this :
Code:root@AZBox:/tmp# iwlist ra0 scanning
ra0 Scan completed :
Cell 01 - Address: 00:0C:21:16:DD:2A
Mode:Managed
ESSID:"HomeLan"
Channel:6
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:82/100 Signal level:-57 dBm Noise level:-111 dBm
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
iwconfig ra0 essid HomeLan
iwconfig ra0 mode Managed
iwconfig ra0 channel 6 ( as my network broadcast on channel 6, in Your case choose what is appropriate for Your network ).
iwconfig ra0 key s:mywpakey (mywpakey will be your network key ).
Result is when i ping it from my pc :
MickeySa:~ mickey$ ping 192.168.1.22
PING 192.168.1.22 (192.168.1.22): 56 data bytes
64 bytes from 192.168.1.22: icmp_seq=0 ttl=64 time=5.569 ms
64 bytes from 192.168.1.22: icmp_seq=1 ttl=64 time=3.591 ms
64 bytes from 192.168.1.22: icmp_seq=2 ttl=64 time=1.501 ms
64 bytes from 192.168.1.22: icmp_seq=3 ttl=64 time=1.637 ms
64 bytes from 192.168.1.22: icmp_seq=4 ttl=64 time=1.649 ms
64 bytes from 192.168.1.22: icmp_seq=5 ttl=64 time=1.738 ms
64 bytes from 192.168.1.22: icmp_seq=6 ttl=64 time=1.533 ms
64 bytes from 192.168.1.22: icmp_seq=7 ttl=64 time=1.795 ms
64 bytes from 192.168.1.22: icmp_seq=8 ttl=64 time=1.754 ms
64 bytes from 192.168.1.22: icmp_seq=9 ttl=64 time=1.649 ms
Thats all, soon GUI version.
This procedure works also with Elite model, which have WiFi stick with this RT chipset :)
is there a premium plus version yet . thanks
Quote:
Originally Posted by buyukbang
"One picture is worth a thousands words"
It would be nice if someone recorded a video and posted on youtube.:respect-056:
FTA channels in hispasat SUCK! Quality is terrible, i would like to see an HD and SD quality in other satellites too :)
@atoth73:
No. DVB-S2 is not working here.
Just a question my friend @bakoko. Are you that was a 4:2:2 feed? Sometimes some people post a feed on satelliweb saying that is 4:2:2 but are wrong!Quote:
Originally Posted by bakoko
But I trust you :) This question is only to acalm my tension eheh :)
Regards
anyone tested any emu as server, newcs, cccam , mbox?
Internal cardreader is functioning for newcs for example? If so how do we make the config of the card in newcs?
Picons are working?
Take it easy man... this is just starting right now. :sQuote:
Originally Posted by moicas3004
I know that, im folowing this tread since the beguining.Quote:
Originally Posted by [0_o]
I just trying to get some feedback. Later im going to test what i can but , as they say that CA is included im thinking in testing the cardreader to serve newcs server.
@moicas3004
Few logs line from CCcam on Azbox.
Internal card reader doesnt work, it isnt on my priority list for the moment.
14:12:13.088 CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
14:12:13.089 CCcam: ================================= ================================= ====
14:12:13.094 CCcam: online using nodeId 83d34828e07fa304
14:12:13.135 CCcam: dvb api3 detected
14:12:13.137 CCcam: DM7025 detected
14:12:13.137 CCcam: create 8 cam device(s)
14:12:13.443 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
14:12:13.444 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
14:12:13.444 CCcam: static cw not found or bad
14:12:13.445 CCcam: parsed 0 entries from /var/etc/CCcam.prio
14:12:13.446 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
14:12:13.447 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
14:12:13.448 CCcam: server started on port 12000
14:12:14.075 CCcam: login at xxxxxxxxxxxxxxxxxxxxxx
14:12:16.082 CCcam: found irdeto caid: 0x622 ecmpid: 0x568 id: 0x0
14:12:16.083 CCcam: found seca caid: 0x100 ecmpid: 0x644 id: 0x6a
14:12:16.083 CCcam: found seca caid: 0x100 ecmpid: 0x658 id: 0x6c
14:12:16.083 CCcam: found seca caid: 0x100 ecmpid: 0x70c id: 0x6a
14:12:16.083 CCcam: found seca caid: 0x100 ecmpid: 0x720 id: 0x6c
14:12:16.084 CCcam: found viaccess caid: 0x500 ecmpid: 0x57c id: 0x42500
14:12:16.084 CCcam: cam[0] set PMT for sid=139c
..................
14:12:58.552 CCcam: [31;1mremote ecm ->xxxxxxxxxxxxxxx 0x100(0x06a)[0m
14:12:58.984 CCcam: [31;1mremote ecm <- xxxxxxxxxxxxx ok (took 0.4313 seconds)[0m
14:12:59.012 CCcam: [31;1mcam[0] ecm even ok caid:0x100 id:0x6a pid:0x70c Unknown (took 0.4602 seconds)[0m
14:13:09.018 CCcam: [31;1mremote ecm -> xxxxxxxxxxxxxxxxx 0x100(0x06a)[0m
14:13:09.450 CCcam: [31;1mremote ecm <- xxxxxxxxxxxxxxxxx1 ok (took 0.4317 seconds)[0m
14:13:09.465 CCcam: [31;1mcam[0] ecm odd ok caid:0x100 id:0x6a pid:0x70c Unknown (took 0.4478 seconds)[0m
14:13:22.024 CCcam: [31;1mremote ecm -> xxxxxxxxxxxxxxxxxxxxx 0x100(0x06a)[0m
14:13:22.446 CCcam: [31;1mremote ecm <- xxxxxxxxxxxxxxxxxxxxxxxxxx ok (took 0.4216 seconds)[0m
14:13:22.462 CCcam: [31;1mcam[0] ecm even ok caid:0x100 id:0x6a pid:0x70c Unknown (took 0.4379 seconds)[0m