Enigma 2 by The_ripper - TEST -

same problem here, ipkg not install :|

Quote:

---

Originally Posted by kanber_kav

root@AZBox:/tmp# ipkg install /tmp/gst-plugin-asf_0.10.16-r0.0_mipsel.ipk
Installing gst-plugin-asf (0.10.16-r0.0) to root...
Configuring gst-plugin-asf
Configuring dreambox-bootlogo
mount: can't find /boot in /proc/mounts
postinst script returned status 1
Collected errors:
* ERROR: dreambox-bootlogo.postinst returned 1
root@AZBox:/tmp#



ipkg not install .

---

It install's, that message is ok, as boot logo is missing :)

I forgott to say if error occurred, dont worry, that is ok.

TO EVERYBODY :

If You get error while installing ipk files, that is OK, dont worry, most of them are caused by not existing paths which are not important :) .

For multimedia player functionality, do not forgett to transfer 2 files from addons.zip archive attached to my post about new ver of E2 for AzBox, and to install this 3 ipk files.

.avi XVID with audio mp3 is ok
mp3 is OK too.

mkv - nothing happens when i try to open.

i forgot to send the ADDONS to usr lib. Now all ok.

insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0"
working! :)

After several tries with AzUp, it finally updated ok.

Service scan doesn't work though...

Even now I have solved ... thanks to the suggestion of Kanber_kav :respect-055:

I had to reinstall the old kernel 2.6.15 with AZup, then reinstall the original firmware 0-9.5020.

After I reinstalled successfully Enigma 2!
So those who had already installed E2 (if it hangs on first boot) is recommended to reinstall the old kernel (CS2) ... first!

Thank's K_K ;)

after playing a while with this version i gotta say, i can see huge improvements and advance :)
keep up the awsome work guys.
soon TV part is ok to go.
also mediaplayer part we got a huge step forward.
it plays, drop frames happens and other stuff.
but it WORKS!
with time all will be good. thank you the_ripper , mickeySA and team.

Nothing works on Hispasat 30W.

No service scan, and the same "No data on transpoder" message using a channel list.

Please confirm this.

outsidaz_ here works ok, canal programação, etc etc.
all FTA are working good.
did u setup hispasat 30w in settings?

because here all FTA opens, and pretty damn fast.

Ok, I have tested this version.
Service scan is ok (but no DVB-S2 (no matter QPSK or 8PSK)). Tested on Astra 19.2E.
Einsfestival HD is working, because it's on a DVB-S transponder.
Also tested video playback. It's working, but on a XviD video file that contains 2 audio streams, are some problems.

Thank you, it's great :)

Quote:

---

Originally Posted by hfmls

outsidaz_ here works ok, canal programação, etc etc.
all FTA are working good.
did u setup hispasat 30w in settings?

because here all FTA opens, and pretty damn fast.

---

My bad. Dreambox edit messed up the settings. Working good now.

Now that's some serious zapping speed! :eek:

Thanks for this great job.

I didn't follow all the thread but i tought that we must connect the Azbox by ethernet and not by wireless to recover an opensat firmware when using Azup.

Could someone can confirm if it's still necessary, it's not wrote in the readme file and could be usefull for some newbs like me.

Quote:

---

5. If You tested enough Enigma 2 on AzBox HD Device and want to be back on AzBox Official Firmware, it is piece of cake
6. Load on FAT32 Formatted USB Memory stick patch.bin ( Official AzBox HD Firmware e.g 0.9.5020 ) .
7. Turn Off AzBox HD Device, put USB Memory stick in Receiver, and Turn it on.
8. On VFD You will see RESCUE MODE and IP Address will be listed.

---

Quote:

---

Originally Posted by Joyle

Thanks for this great job.

I didn't follow all the thread but i tought that we must connect the Azbox by ethernet and not by wireless to recover an opensat firmware when using Azup.

Could someone can confirm if it's still necessary, it's not wrote in the readme file and could be usefull for some newbs like me.

---

Confirmed!

Quote:

---

Originally Posted by ouTsiDaz_

After several tries with AzUp, it finally updated ok.

Service scan doesn't work though...

---

Scan doesn't work for me either.
0 services found on 28.2E

Is this the same for all satellites?
Do I need to use DreamboxEdit to upload the channels?

Thanks for this great job !!!
Somebody knows when will "Riper team" fix DiSEqC?

Is cccam working good as Server?

Quote:

---

Originally Posted by moicas3004

Is cccam working good as Server?

---

Again - please read this thread. Few pages ago -- emulators will follow after working CAS....

as they say that they added CA, i just asking if cccam now run, even if it doent decode nothing, because in previous version it stops. Anyone can confirm that now it runs as server?

Quote:

---

Originally Posted by zulika

Thanks for this great job !!!
Somebody knows when will "Riper team" fix DiSEqC?

---

Hi! Just stay tuned and wait. Nobody from dev. team gives any dates... It will be fixed when the time will come...

Please read, find and then post - I'm pretty sure, that coders don't have time to waste it by reading posts like this.

Thanks

I would like begin to test this image,
but first we can load the same channel list than in dreambox?
and plugins also could be installed?
we hope that cccam works as well as in dmbox im waiting that,
i would like also that the ripper be the engineer chief of Azbox because he knows better this box than the owners of the company.

thanks team