Printable View
Hi guys
With all your old messages I manage to put back my box on, and it work fine, I can change channel without a problem.
My only concern it is for BFMBusiness channel, I still don’t have. If I look on lynsat BFMBusiness channel is 11596v ect.
On my tv is 11595v ect. I don’t know how to change that. Maybe you can help me.
In my tv room I have a normal Fransat box and I still have BFMBusiness on.
Regards
Alain
Try manually re-scanning it in, along with BFM Sport, and BFM Paris, on 11595 V 29950 DVB-S2 8PSK 2/3
Dear Mickha
Thank for your reply, I need to go to menu, options Channel, choice Manuelly re-scanning, I need to put info and just let the box to do ?
Regards
It depends on your image, go into the menu, settings, or setup, look for the tuner configuration/manual scan, enter the details and select the option to replace the current channels.
Always make sure you have a back up, of your channels, and bouquets, using dreamboxedit, or dreamset.
Quote:
Originally Posted by Mickha
Dear Mickha
You will see below in pic what I didn’t still same problem, it look like I scan 11596 , I find BFMBusiness in the list, when I click on , screen black but if I press on info of this channel it s 11595 , it don’t take the channel change.
Any help guys, thank a lot .Attachment 67882Attachment 67883Attachment 67884Attachment 67885
You need to set the Clear Before Scan option to Yes, but it shouldn't matter whether the frequency is 11595, or 11596.
You might have multiple versions, of the channel, scanned in, check in the All Channels option, when in the channel selection you usually have the option to press the red button, on your remote, to view all channels.
Attachment 67888Attachment 67889Attachment 67890Attachment 67891Attachment 67892Attachment 67893
I did what you ask, I take pic of all stage and still not channel, we still have the issue with 11596 it s scan but we i click on the black screen of BFMBusiness, they say 11595.
I try to press the red button when I had the results but nothing. It is very strange because BFMBusiness stop to work one day , but I still have this channel on a Fransat box downstairs, because I was thinking maybe they stop to be on
Regards
You need to exit the scan, then bring up your channel list, not the last scanned, but the full channel list, usually done by pressing the up/down arrows, on the centre of your remote.
When you have the full list up you should see options, in Open Black Hole you press the red button, for All channels.
Quote:
Originally Posted by Mickha
Dear Mickha
I exit scan, I press up/down near ok button middle of the remote control, I had a list after I press the red button, I have a All channel but I find BFMBusiness but nothing, I don’t have option Open Black Hole
Regards
Attachment 67894Attachment 67895
Have you scrolled down, to the bottom of the page, in your second image?
As you can see, by the white bar, on the right hand side, you have quite few channels.
Since I don't use Openvix, or have a Fransat card, I doubt I can help you any further.
probably using a different unkown aes key. Since a few days ago fransat ultra HD was opening fine in oscam but not now, working fine if I use the ci+ cam though
Thank Mickha but no success, never mind if you can’t assist more. I just saw 3TV put a message, I will see if it can help because I think it have the Fransat card.
3TV, thank for reply and I hope you can help me. Don’t forget I am not a pro. I can’t understand it look like Fransat change something since few days, it is maybe for that I lost BFMBusiness tv, I lost only this Chanel few days ago, what I need to do exactly for have back this channel if it is possible. How I used the ci+ cam ?
Best regards
Alain
CI+ Cam, Common Interface, is the official Fransat cam module.
Attachment 67896
Your VU+ Duo has two Common Interface slots, that the CI+ Module can slide into.
If I buy a CI+ module, it will work straight away or I will need to do more thing because like you know guys I am not so cleaver with that.
Where I can buy a CI+ ? It need to be a special one ?
Regards
If I look on **** you have plenty options to buy
https://www.****.co.uk/bhp/ci-module
Don’t know witch one
fransat neotion ci+ camQuote:
Originally Posted by Nozahic
Dear 3TV, I need to order CI+ with a new card or I can used my card ?
Also if I buy that I will need to do a lot of change on my vu+ box ? Because like you know well I am not so good with the setting of the box.
If you think it will be too complicated, I will keep like that without BFMBusiness on my second TV, because I have all the other channels
Best regards
Alain
I think its image specific if they support ci+Quote:
Originally Posted by Nozahic
you only need the cam, you will be limited with what you can do with recordings though when viewing using the ci+
Dear 3TV
Thank you for your explanation, I order a new one with the card, we will see when I have
I will need to do some update on my box or it will work fine straight away with all the update I did in the past with you and Mickha
Regards
2Attachment 67899Attachment 67900
I received today the ci+ Fransat with card , I put in slot 1 and put back the tv on but still no BFMBusiness on, I keep the other card in also , I need to move the other card ?
When I go to ci assignment, I can see slot 1 Fransat , if I press green, I have a message for say problem software, the box turn off and start again but no BFMBusiness
I will need help please from you guys
Regards
Alain
remove the all cards and see if the fransat ci+ cam and card opens any channels if not ci+ might not be supported by your image or hardware. The vti image supports itQuote:
Originally Posted by Nozahic
If I understand, I need to move my old Fransat card and start again.
I didn’t that after I put back my box on, turn off at the back. No pic
I go to menu, set up, common interface, common interface assignment,
I this point I can see slot 1 Fransat and slot no module found
I press green button for edit
I have a message who come and the box come back to this screen where I wait and this message come on with erreur
I press ok and wait but nothing happens
I would like your help but don’t forget I know so good with that , pass me all the detail please Attachment 67901Attachment 67902Attachment 67903
there is a ci+ helper plugin you can install, if that doesn't work you could try installing the vti image. you need to find out if your receiver supports ci+ also.Quote:
Originally Posted by Nozahic
How I can install ci+ helper plugin ?Quote:
Originally Posted by 3tv
Sorry to be stupid but when you say if your receiver support ci+ , what you means ?
For finish you say to install vti image, what I need to do for that.
Because now I just take off the ci+ from my box and I lost all the channel, no more tv , I put back my card only but when I try to manage the soft cam , they don’t stay like before.
if your using an old image on your receiver then that might be a reason it doesn't work, I don't know if the ci+ helper plugin will work for you or not or even if your receiver supports ci+. You need to do homework, google all questions.
3TV I look on google and it look like some people have ci+ Fransat with vu+ duo , the thing is now since I put this ci+ in my box , I lost all my channel and I don’t know how to have back. Also I bought this ci+ and ask if it will work . You know since last time I am not so good and cleaver with all this things. Now what I can do for have back mu channel without BFMBusiness and I don’t mind to lose £90 for this ci+ Fransat, I order but will not work in my box.
Regards
Some images no longer support CI+, I know the developers of Black Hole, and Open Black Hole, have ceased support, possibly due to pressure from some providers.
Which image, and version, are you running?
Dear Mickha
I am not sure, how I can find this information because now I lost all my channel since I put ci+ in my vu+ box.
reboot, restart oscamQuote:
Originally Posted by Nozahic
Good evening
I am so sad now because I mess up everything with this ci+ , I lost all my channel and I don’t know what to do. I past the last 3 hours to look everything and can’t see what is it wrong.
I rebooted my box few time and no channel back, if I go to menu, setup, softcam , softcam manager , I can see my Oscam but when I try to activate them , nothing happen and don’t stay in active
Also I look online like 3TV say, for the ci+ Fransat work with a vu+ box, the card need to be paired by tv before to be put in the vu+ box.
For be honest with all this issues, I would like just my box working without BFMBusiness channel and I will send back the ci+ to the seller because again he look far to complicated for me, and if I read what 3TV , I can’t recorded tv program with this ci+.
Regards
Attachment 67904Attachment 67905
Any help guys because I am looking everywhere and I am lost , I look FileZilla and my Oscam are still here, but I can’t log on Oscam, I can open openwebif but don’t have Oscam.
Please guys help me to just be back like before , I don’t mind to have 1 channel lost if the other work fine and I will send back this bloody ci+ who destroy all my system
Regards
most images have Oscam built into so no need for filezilla....press green button to add plug ins, itll be under softcam , at least on openvix it is presume same for other images ?Quote:
Originally Posted by Nozahic
adding a ci+ and removing doesn't effect your oscam files they work independently.Quote:
Originally Posted by Nozahic
You just have to select which option you're using, usually by pressing the blue button and selecting Common Interface, or Oscam.
I manage to have back my channel without BFMBusiness channel, but I will listen the radio
I send back the ci+ Fransat because too complicated for me
Thank all for your help
If someone knew how I can have BFMBusiness back on my card and vu+ duo, I will take advice but not too hard
Regards
Alain
Hi guys
I had some power cut at home this weekend and lost my vu+ duo box, I settle with you. Don’t want to go on any more.
I take another of my box, and I read all our past message and resetting this vu+ duo box. But something is wrong, I don’t know what but can’t have the channel of fransat.
I take few pic for you can look, I hope it will be easy this time
Regards Attachment 68278Attachment 68279Attachment 68280Attachment 68281Attachment 68282
easiest way is to use atv 6.2 image and ci cam, it now supports ci+ cams by default
Dear 3tv
Thanks for your message, but again not sure what I need to do for have what you message me.
I pass all day yesterday to read all the message, I am not too far to settle this box, maybe if I send you few pic you can see straight away my mistake for have fransat
Other way what I need to do with your easy way, like say I don’t mind to pay if you know someone who,can do the box for me
Regards
Alain
I can confirm that OpenATV 6.2 + Fransat CAM works in my Vu Solo2.
It is a good image in any case so worth making the switch if you need to use CI+
Ok guys, if I understand now it is more easy to have fransat on vu+
I find this image online, it is the good one ? I need to put back my box to factory setting ? After I downloaded this new image in my box and after I will have fransat .
Last question I have already the card fransat, I just need to buy a ci + cam who can read my card or I need to buy a full fransat ci+ camAttachment 68283