it does have to be female, but i use a 9 pin male to female pin cable as well so a usb to male is ok with me.Quote:
Originally Posted by joany
Printable View
it does have to be female, but i use a 9 pin male to female pin cable as well so a usb to male is ok with me.Quote:
Originally Posted by joany
good news i work out the problem for com port error, my cable was to long it seems, bad news is i don't have a decent download speed for this program as i use the internet via a dongle, but i think i get a better broadband supplier when my contract runs out so i'll be ok then.Quote:
Originally Posted by titus
not exactly: comport on computer is always D9 male pin
USB to serial converter:
https://www.satpimps.co.uk/attachmen...1&d=1277360069
comport on receiver is always D9 male pin
null modem cables are normally always D9 female crossed wired D9 female
Null Modem cable:
http://upload.wikimedia.org/wikipedi...em_cable_1.jpg
so you would need:
- USB to serial converter
- null modem cable
maximum distance 5 meter/ 16.4 feet together, null modem wire diagram in attached thumbnails
Eddie, I dont think you've said WHICH channels/package you are trying to open mate?:respect-055:
how can you get this to work with a tm5200 usb super anybody know
check in menu for option and serial mode if you have a patched firmware on it? if this possibility is there? set Serial Mode: sssp, baudrate: 115200
anyone know if jsc sport down? ok on canal sat fr. keep up the good work compass and thanks alot.
I cannot get on 19E Canal Sat France on my Technomate 1500CI+
2010/06/24 17:18:19 7880 p04 proxy meolsat.ath.cx:20002 newcamd525 (fd=4)
2010/06/24 17:18:19 7752 s proxy started (pid=7856, server=meolsat.ath.cx)
2010/06/24 17:18:38 8172 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)
2010/06/24 17:18:43 7836 p08 connect(fd=4) failed: (errno=111)
2010/06/24 17:18:43 8172 c01 tuner (0500&032820/24B9/34:EE56): not open (1060
ms)
Duplicate post.
I'm following these instructions by Compass and Canal Sat is working fine on my TM1000ci.
using SSSP & Null Modem cable connected to receiver
Save & unpack the attachment
1. run CILQUER ICI
2. open folder SBCL_ vpulg
3. run SBCL v1.0i
4. check to see if vplug is active (ticked)
Weston Calling
Many Thanks I didn't go to SBCL v1.1b folder and then click and open SBCL v1.b1.
Someone smack my botty. :beatdeadhorse5:
Sorry M8 Canal +1 WestQuote:
Originally Posted by holmroad
Well I think we dont get ALL of C+ Nordic on 1W mate, just a few, e.g. 'Series', Sports ( SD & HD) Eurosport HD, BBC HD, - its more a trial of error to be honest - and the HD channels once opened usually only last a few minutes before freezing! I also usually make sure any cam is not inserted whilst watching too, as this can cause compatibilty probs with HD channels!Quote:
Originally Posted by eddieaok
I find the JSC Sports 1-10 (13E) tend to open best mate!
Many C+ France channels open on 19E though too!:bravo-009:
Hello,
I've finally had a serious go at getting this to work, but as before with no success. I've read the brief instructions and various forum posts/threads but I have little idea of what I'm doing.
I am on Vista Home Premium and using:
ThemeX,JSC,13°E,C+france19E,Canal-Digital0.8°W,24-06-2010-_by_Compass.zip
and testing with JSC Sports 1 and 2.
Running CILQUER ICI.exe opens a DOS window which runs as far as:
4468 s serial: initialized (pid=4256, auto@/dev/ttyS0)
4556 p08 proxy 127.0.0.1:6001 newcamd525 (fd=4)
I've tried running SBCL v1.1b both before and after running CILQUER ICI.exe and selecting 'Active' in SBCL v1.1b's 'vPlug' dropdown selector.
This is CS requiring an internet connection isn't it? If so, my computer makes no attempt to connect through my firewall. I would get notified if it did.
Do we have to forward a port in the internet modem/router?
I have my TM set to SSSP and my pc COM port is COM2 which works fine with the Darkman Loader for uploading and downloading channel lists and softcams.
The cable however is quite long; is it possible that even though it works fine for softcams/channel lists, the length might not be suitable for this?
If so, would that mean that the TM would not 'request' an internet connection so the process just stops?
I cannot move my TM and pc closer and use a shorter cable.
Thanks for any informed help.
Is this a daft question - What is the advantage of this setup over say a straight forward ethernet connection to stb.
Is anybody using a straight forward cs setup using 8281 and an internet connection to the stb?
Guessing: its more an addition for emu's not handled by TM-6900 like Viaccess above 2.5.
Mainly usage for C S in my case:
- local distribution of official card(s) to 2 TM-6900HD Super (can watch 2 programs on same card)
- not having to use official CI module (slow zapping)
It appears I have it working, after looking elsewhere on the internet for inspiration.
I had to go into mpcs.conf and change the following line:
Device=au://tuner@/dev/ttyS0
to
Device=au://tuner@/dev/ttyS1
I have no idea why 'ttyS1' means COM2 but it appears to.
I'm guessing the download package assumes we are all using COM1, which is already in use on my pc. I am using COM2 for the serial connection.
Can I suggest the instructions are improved to explain the use of this setting.
Also, can it please be clarified if what we are doing here is CS and therefore we are open to being tracked by our IP addresses.
ttyS0 = COM1Quote:
Originally Posted by mynameisEarl
ttyS1 = COM2
ttyS2 = COM3
ttyS4 = COM4
tty: A generic term for any computer data terminal or associated serial interface
Yes is C SQuote:
Also, can it please be clarified if what we are doing here is CS and therefore we are open to being tracked by our IP addresses.
as my computer is upstairs and no where near my tv my other laptop has a rs232 9 pin attachment on it would i still need a usb to serial adaptor or could i just use a rs232 from laptop to tm reiceiverQuote:
Originally Posted by Giga
if you have the rs232 on the laptop, that would do.
Thanks, Giga.Quote:
Originally Posted by Giga
I'm pleased I finally got this working as a personal challenge.
27-06-2010
Updated
Jsc Sports +1 = +8 On Hotbird 11296 H 27500
JSC World Cup Hotbird 10815 H 27500
Jsc+9 => Jsc+10 Hotbird 10815 H 27500
JSC Sports HD + 3D, Hotbird 10815 H 27500 3/4
Get it from here: https://www.satpimps.co.uk/showthrea...019#post733019
for this program is it a decent upload speed or download speed required.
Hello,
With Compass's releases yesterday and today, I have no problems with Theme-X but no luck opening any JSC Sports channels.
Can I assume then that my set up / cable length / timeouts are ok but the JSC servers are either dead or over loaded?
Thanks.
download/upload speed is not the essence. Response timings is all, these are showing in the DOS box below 1000 ms should give nearly no freezes.
@mynameisEarl,
there are limits what C S server can handle (users, network connection to it, same channel requests, ...) sometimes it works, other times it won't.
is their anyway to change the response times as i can get theme x to work but when i try thor 0.8 the timings are up in the 7300 ms range and i just get timeout, or if if does open it only lasts for about 6 seconds before freezing again
Does this work for any channels on 16E or is that another program ?
@titus: nothing you can change, or if you have the means to bring the server closer: it is the time needed for that signal to go to the server and come back.
@pineapple jack: works only for mentioned providers
30-06-2010
Updated
Jsc sports on Hotbird
ThemeX On Hotbird
Quote:
Canal Sat France 19.2E Down!
Get it from Here : https://www.satpimps.co.uk/showthrea...694#post733694Quote:
Canal Digital Sweden on thor ok
Interesting thread this, but how do you change the Com Port from 1 to Com whatever?
I can see from a previous post that you go into Device etc, but where is Device for me to access and from what (PC, SBCL,?). Also, how do you switch on SSSP on the Tech 1500c is it by changing channels as possibly mentioned earlier? Don't seem to have this facility in the 1500 c Options Menu. Many thanks in anticipation and
Best wishes from,
Gibson.
device is on ure pc go to control panel-system-hardware then change the port to 1Quote:
Originally Posted by gibson
06-07-2010
Added Canal Digital NL 19.2E
Seca Channels
Quote:
Jsc sports on Hotbird ok
Quote:
Bulsat 39E ok via Vplug
Get it from Here : https://www.satpimps.co.uk/showthrea...894#post734894Quote:
ThemeX Have provider Problems again!
not working for me this morning. Timeot.Quote:
Originally Posted by ^^COMPASS^^
It worked yesterday tho.
The server must be busy because it is reachable with a ping value of 82ms
:iagree:Quote:
Originally Posted by joany
Yes i noticed, I'm updating it as i speak :D
Thanks Compass - latest one once more here updated to 7/7/10!
https://www.satpimps.co.uk/showthrea...894#post734894
Once again you ARE a star mate!:respect-067:
Just checked new file and C/Ned 19E working fine, as is Bulsat 39E, but JSC Sports & Theme X 13E & C+ Nordic 1W still not working as at 0945hrs BST!:respect-055:
Thanks very much for this. I can confirm that the Dutch channels are working fine on my TM1000CI.
I must admit I find it a bit frustrating that I can't open ESPN America with this and that I have to revert to the ThemeX,JSC,13°E,C+france19E,Canal-Digital0.8°W,28-06-2010-_by_Compass to open this channel.
Weston Calling
The link above is not working. anyone can provide a valid link. Many thanks
last posting
https://www.satpimps.co.uk/showthread.php?t=135732
Was working fine yesterday now i got" portcom error",im using windows 7 checked settings in device manager im on comm1,any body else had this problem? I did have a go at getting Bullsat earlier in the V PLUG earlier would this hacve anything to do with it.