Hi friendQuote:
Originally Posted by hfmls
the problem of elite blocked have solution?
very people have this problem
u put this version on your azbox?
run ok? or blocked to of "elite"
thanks
Printable View
Hi friendQuote:
Originally Posted by hfmls
the problem of elite blocked have solution?
very people have this problem
u put this version on your azbox?
run ok? or blocked to of "elite"
thanks
freezes version 1.0.30 to boot
12 .... 24 ... 'premium'
<enigma2>
<crashdate>Sat Jan 1 00:08:50 2000</crashdate>
<compiledate>Oct 16 2010</compiledate>
<contactemail>crashlog@dream-multimedia-tv.de</contactemail>
<!-- Please email this crashlog to above address -->
</enigma2>
<image>
<kernelcmdline>mem=107m console=ttyS0,115200</kernelcmdline>
<imageversion>
<![CDATA[
version=1000201009022245
comment=OpenDreambox
target=9
creator=OpenEmbedded <oe@dreamboxupdate.com>
url=http://www.dreamboxupdate.com/
catalog=http://www.dreamboxupdate.com/
]]>
</imageversion>
<imageissue>
<![CDATA[
OpenDreambox 1.6.0 %h
]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
enigma2 - experimental-git20100728-r0
enigma2-defaultservices - 1.0-r4
enigma2-plugin-extensions-cutlisteditor - experimental-git20100728-r0
enigma2-plugin-extensions-genuinedreambox - experimental-cvs20100727-r0
enigma2-plugin-extensions-graphmultiepg - experimental-git20100728-r0
enigma2-plugin-extensions-mediaplayer - experimental-git20100728-r0
enigma2-plugin-extensions-mediascanner - experimental-git20100728-r0
enigma2-plugin-extensions-modem - experimental-git20100728-r0
enigma2-plugin-extensions-pictureplayer - experimental-git20100728-r0
enigma2-plugin-extensions-webinterface - experimental-cvs20100727-r0
enigma2-plugin-systemplugins-frontprocessorupgrade - experimental-git20100728-r0
enigma2-plugin-systemplugins-hotplug - experimental-git20100728-r0
enigma2-plugin-systemplugins-network****** - experimental-git20100728-r0
enigma2-plugin-systemplugins-positionersetup - experimental-git20100728-r0
enigma2-plugin-systemplugins-satfinder - experimental-git20100728-r0
enigma2-plugin-systemplugins-skinselector - experimental-git20100728-r0
enigma2-plugin-systemplugins-softwaremanager - experimental-git20100728-r0
enigma2-plugin-systemplugins-videomode - experimental-git20100728-r0
enigma2-plugin-systemplugins-videotune - experimental-git20100728-r0
enigma2-plugin-systemplugins-wirelesslan - experimental-git20100728-r0
enigma2-streamproxy - 1.0cvs20080728-r0
task-opendreambox-enigma2 - 1.0-r5
]]>
</enigma2software>
<dreamboxsoftware>
<![CDATA[
dreambox-blindscan-utils - 1.1-r0
dreambox-bootlogo - 2.1-r3
dreambox-compat - 1.0-r0
dreambox-dccamd - 1.2-r3
dreambox-dvb-modules - 2.6.18-7.3-dm800-20100623-r0
dreambox-dvb-tools-v3 - 1.7-r0
dreambox-feed-configs - 1.0-r0
dreambox-keymaps - 1.0-r1
dreambox-modem-ppp-scripts - 0.1-r0
dreambox-secondstage - 76-r1
dreambox-tpmd - 4-r2
dreambox-wdog - 1.2-r0
enigma2-plugin-extensions-genuinedreambox - experimental-cvs20100727-r0
initscripts-opendreambox - 1.0-r24
task-opendreambox-base - 1.0-r5
task-opendreambox-dvbapi3 - 1.0-r0
task-opendreambox-enigma2 - 1.0-r5
task-opendreambox-modem - 1.0-r0
task-opendreambox-wlan - 1.0-r3
]]>
</dreamboxsoftware>
<gstreamersoftware>
<![CDATA[
gst-plugin-alsa - 0.10.30-r9.0
gst-plugin-apetag - 0.10.24-r9.0
gst-plugin-app - 0.10.30-r9.0
gst-plugin-audioconvert - 0.10.30-r9.0
gst-plugin-audioparsersbad - 0.10.19-r9.1
gst-plugin-audioresample - 0.10.30-r9.0
gst-plugin-autodetect - 0.10.24-r9.0
gst-plugin-decodebin - 0.10.30-r9.0
gst-plugin-decodebin2 - 0.10.30-r9.0
gst-plugin-dvbmediasink - 0.10+cvs20100729-r0
gst-plugin-flac - 0.10.24-r9.0
gst-plugin-icydemux - 0.10.24-r9.0
gst-plugin-id3demux - 0.10.24-r9.0
gst-plugin-ivorbisdec - 0.10.30-r9.0
gst-plugin-mad - 0.10.15-r9.0
gst-plugin-matroska - 0.10.24-r9.0
gst-plugin-mpegaudioparse - 0.10.15-r9.0
gst-plugin-mpegdemux - 0.10.19-r9.1
gst-plugin-mpegstream - 0.10.15-r9.0
gst-plugin-ogg - 0.10.30-r9.0
gst-plugin-playbin - 0.10.30-r9.0
gst-plugin-qtdemux - 0.10.24-r9.0
gst-plugin-rtp - 0.10.24-r9.0
gst-plugin-rtpmanager - 0.10.24-r9.0
gst-plugin-rtsp - 0.10.24-r9.0
gst-plugin-selector - 0.10.19-r9.1
gst-plugin-souphttpsrc - 0.10.24-r9.0
gst-plugin-subparse - 0.10.30-r9.0
gst-plugin-typefindfunctions - 0.10.30-r9.0
gst-plugin-udp - 0.10.24-r9.0
gst-plugin-vorbis - 0.10.30-r9.0
gst-plugin-wavparse - 0.10.24-r9.0
gstreamer - 0.10.30-r0
libgstapp-0.10-0 - 0.10.30-r9.0
libgstaudio-0.10-0 - 0.10.30-r9.0
libgstinterfaces-0.10-0 - 0.10.30-r9.0
libgstnetbuffer-0.10-0 - 0.10.30-r9.0
libgstpbutils-0.10-0 - 0.10.30-r9.0
libgstriff-0.10-0 - 0.10.30-r9.0
libgstrtp-0.10-0 - 0.10.30-r9.0
libgstrtsp-0.10-0 - 0.10.30-r9.0
libgstsdp-0.10-0 - 0.10.30-r9.0
libgsttag-0.10-0 - 0.10.30-r9.0
libgstvideo-0.10-0 - 0.10.30-r9.0
]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) gLCDDC
couldn't open LCD - load lcd.o!
lcd buffer 0x6a3a08 8448 bytes, stride 132
+ (9) GFBDC
FATAL: no framebuffer available
]]>
</enigma2crashlog>
<pythonMD5sum>
<![CDATA[
943167eb90dc3145e1b9f61dbd098c3b /usr/lib/enigma2/python/tools.py
2c2235efea39b47d55c0205b3bdd0e23 /usr/lib/enigma2/python/Components/Task.py
11000ec9591b9e5a9f5bed4037d2c91f /usr/lib/enigma2/python/Components/VolumeBar.py
c49b29929b4e4162394dc2f7a8c772f8 /usr/lib/enigma2/python/Components/ScrollLabel.py
83384daaed9da756f7866d192d26b4b2 /usr/lib/enigma2/python/Components/Renderer/Canvas.py
0ac8f04c6afce9e867315523e2e609c8 /usr/lib/enigma2/python/Components/Renderer/Picon.py
enigma2 crash log
Premium+ owner here. Just tried it very briefly. Because I have to work, unfortunately, heh. The flashing went fine though. Most things seem to be working. Sound mostly working with SD channels. But couldn't get any sound with hd channels. Tried it repeatedly. Will try further when I get back home tonight from work. But very impressive work so far. Thank you the_ripper & team!
on premuim+ work fine
These are the problems we have with Premium and Elite so looks like we are all at the same stage.Quote:
Originally Posted by DGSCronos
We all have to wait until fix is available.
but in prmium because i have premuim and premuim+
on premuim+ work very fine P+
P+ FAN control work, volume control work also
but on premuim when i install it after reboot it's stay blocked after 25% with "premuim"
on VFD
thanks greay work perfect
Hello
Same problem ,blocked on "Premium" on the panel off Azbox Premium
Premium+ and the gui finally shows up! The_Ripper: is there any way to assist in writing the DVB-C driver?
Hi,
Please stop installing version 1.0.30 on Elite or Premium.
This version only works on Premium+.
Pr2
ok. Thanks ,Quote:
Originally Posted by pr2
Hai!
Pleas, still waiting DVB-T on ELITE.
Thanks!
Hi guys,
go to rescue mode ,telnet to receiver and mount DOM, for example
#/>mkdir DOM
#/>mount /dev/hda1 /DOM
then FTP to receiver and replace file /DOM/lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko with one attached with this message.
Then just reboot.
doing this in elite, the firm 1.0.33 works ok?Quote:
Originally Posted by The_Ripper
And in rescue Mode telnet connection need pasword....
ah oks,put of the penfrive no?Quote:
Originally Posted by numark0504
and when azbox blocked in "elite" message , go to telnet and mkdir... etc...
no?
replace that em8634dvb.ko, serves to desfreeze the azbox after the reboot?
thanks
With premium juste do thisQuote:
Originally Posted by kevinch9
FTP to receiver and replace file /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko with one attached with this message.
and it ok my premium boot correctly now
All Ok now with premieu
CCcam ok
HD and SD and 3D HD channel OK with CCcam
All work fine exept Sound of course cause not yet fixed
I did it on Elite and "everything" is Ok now. You can simply FTP the new module to the modules folder when the box stops after the upgrade. Just remeber to apply the 755 attrbutes, then reboot. The IP address should be the one you just used for the upgrade, unless your router is crazy.Quote:
Originally Posted by The_Ripper
Thanks a lot ripper for the work done.
Same known bugs, but one can survive.
I would like to recompile the module tun.ko to be compatible with the kernel, any suggestions?
@satatrec
I compiled tun module, I hope thats the one
one quest ?Quote:
Originally Posted by The_Ripper
where to replace this file ? thanks .
prem + all working but only got astra 28 cannot upload new sats or channels
im missing something but dont no what . any advice would be good .
thanks
and it works great many thanks to the ripper and all guys
Great Ripper, I'll test the whole OpenVpn chain and be back on the forum, for those who are interested.Quote:
Originally Posted by The_Ripper
The Installation of E2, OK
Tuner Setup, OK
Search of Channels, OK
Many Problems with the Volume in the Majority of the Channels;
or they do not have Sound.
or the Sound cannot be controlled does not react to the volume +/-.
Some of them work very well.
I put the List of Channels of my DM800 and It works Quite perfectly, good I do not have for that to understand it but the case is that It Works
At the moment only It me Works with the Cable Scart, for the HDMI it does not give Sign
@kakasat
Replace ?
I dont know why @satatrec needs this kernel module "Universal TUN/TAP device driver support", I compiled for him that if thats the one he wanted. Some app he used maybe needs this support activated in kernel ...
EDIT: I just refresh page and saw why he needed this module ...
Ok , and thanks .
Good work , keep it up :001_005:
Regards .
@The_Ripper,
is too hard (or time consuming) to compile usbhid modules in upcoming versions?
I would like to start helping with usb mouse/keyboard setups. I think it'll be useful on browser plugin and E2 overall management.
Please, understand: I'm not asking you to add, I'm asking if its hard and maybe, when you have some time, you could consider this. :)
Or, if someone know what is needed to compile usbhid and want to share the knowledge, I could try it by myself and The_Ripper would not spend his time with this. ;)
Regards
@pingflood
I attached some of the modules for that, try it and tell me if you need something else ...
Are you going to try and get Qtbrowser to run?Quote:
Originally Posted by pingflood
@pingflood
Here they are, compiled by the_ripper :
usbhid.ko
usbkbd.ko
usbmouse.ko
Hi.
Thanks for all the hard work you guys have been doing.
Just one quick question about rf modulator. Does it work?
I've searched, but there's no info about this.
Thanks.
Can we expect a new enigma 2 img with fix for the elite and the premium, or there will be new and only if there is more progress. is only a question?Quote:
Originally Posted by pr2
Hi,
Installed E2 on P+
The Installation of E2, OK
Tuner Setup with 13 lnb and multiswitch diseqc 1.1, OK
Search of Channels, OK
Noticed:
no 12V out menu for controlling coax switch for my 2. dish
Did only find one tuner, not the 2. dvb-s2 tuner
Have to get it to work with cccam and smargo reader, but I think it is in one of the previus posts.
my friend, easy. Wait until new image is lunched. As the team get its progress they will keep making images. Just be patient. If you like to try this 1.0.30 on elite or premium use the files posted a few posts ago. Just read.
@all
Ultra driver finished and working.
Probably today v1.0.31
Elite/Premium/Premium+/Ultra - All working edition :)
You all working like speed of light :respect-023:Quote:
Originally Posted by MickeySa
thanks .
The RF modulator works but you can't change the frequency for the moment. You will find the channel used if you do a search (it's way up in the freq band).Quote:
Originally Posted by lobopt
//T33
Installed v1.0.30 on Elite.
Hangs on 25% > elite, applied new em8634dvb.ko driver.
DVB-S Scan OK
DVB-S2 Scan OK
Dish movement OK (Using DiSEqC 1.2, Astra 19.2E and Astra 23.5E)
DVB-S Video OK
DVB-S2 Video OK (incl. HD)
CCcam OK
Volume Control OK
Mute/Unmute OK
Still sound probems (just for info).
Integrated usb mouse/keyboard Qtbrowser 1.0.31?
@The ripper
I am glad to inform you an all the others that the module tun.ko is working fine.
It loads and unloads with no issues.
I have placed it in /lib/modules/2.6.22.19-19-the_ripper/extra
The openvpn package is working as well.
Some notes attached. May be not the best ones, but they worked for me.
Hope is clear.
after many hours all sats works it has is niggles but the prem +
works like i never dreamed it would .
good work chaps
many thanks
does it have the standby button working already?Quote:
Originally Posted by kasukabe
ty in advance.