can anyone point me in direction of hamedonnet.rar as i cant find it on forum
cheers archie
Printable View
can anyone point me in direction of hamedonnet.rar as i cant find it on forum
cheers archie
It was on the first post of this thread but has been removed. You need last nights file from the other thread.Quote:
Originally Posted by archiesat
cheers m8 many thanks
archie
Thanks Giga mate, so can you point me where to change the setting if necessary, or is it in the TM6900HD SSSP menu part please?:respect-055:Quote:
Originally Posted by Giga
nothing we can change, perhaps ^^COMPASS^^ can, but not this weekend from his home on wheels, I think
Hi,
Please advise me where to look for last nights othe thread, I must be going blind because I just can't see it :(:(
Look on the technomate forum. It's the one currently under this entitled Canal-digital..... Compass has linked to it several times on this thread.Quote:
Originally Posted by AnyAirPlane
@anyairplane
post number 70 in this thread m8 just click on it and download the zip file contains the prog
unpack it to desktop
Plug your Pc to Your TM Receiver (It is compatible with USB To serial for Laptop's)
1.Unpack
2. start CILQUER ICI .exe
3. Depending on your STB you may need to enable SSSP in your receiver Menu or just change channel to activate sssp on TM1500
as per compass instructions
Quick update for JSC sports on Hotbird before i'm away
Jsc+1 on Hotbird 100% ok
Jsc+2 on Hotbird 100% ok
Jsc+3 on Hotbird 100% ok
Jsc+4 on Hotbird 100% ok
Jsc+5 on Hotbird 100% ok
Jsc+6 on Hotbird 100% ok
Jsc+7 on Hotbird 100% ok
Jsc+8 on Hotbird 100% ok
Jsc+9 on Hotbird 100% ok
Jsc+10 on Hotbird 100% ok
https://www.satpimps.co.uk/showthrea...401#post726401
Thanks Compass and Learning for the pointer and instructions. I have downloaded to pc and will have a play in the near future when time permits.
Thanks,
AAP.
thank you compass
i have a 1500 5400 6900 and i taught i would have to change but you have given us a new lease of life.
thank you again.
Apperciate any helps!!
Coonect my TM6900 to my laptoop through a null modem and USB-RS232 adapter and I am getting error when starts the 'click ici' on Compass utility. Any way to test this may eb to see first the connectivity from laptop to the receiver. Thanks
I have a 6900 hd combo not super and had the same problem loaded it keep saying error tried everything so turn of laptop and tm re started them and all ok just make sure file is up to date as compass is away on holidays he is doing a great job for us hope this helps
Have you looked at the posts regarding changing com port on USB adapter to com 1? It gives unable to open com port (or something similar) if not . Just put Jaz +3 on for the play off final and it's working fine. You should use the latest file also. Is it the same as my 6800HD where you have to enable SSSP mode?Quote:
Originally Posted by FOX
edit: spoke to soon JSC seems to have gone off. At least the football is fta on sportitalia 12.5W
yes tried this and unfortunately no success. I am using the 'JSC,13°E,Canal-Digital0.8°W,28-05-2010_by_Compass' file which I believe is the latest one. I have also changed the 'mpcs.conf' file for tty1 as suggested but no avail.Quote:
Originally Posted by kery
I have just got the USB/RS232 adapter and not sure if connectivity to receiver is right and the right driver are used. Is their any utility that we can try to test the Laptop/TM6900 connectivity?
The latest one says ...2nd... in the filename. Try the bulsat file on the technomate section. This doesn't need the com port changing when I tried it but it's not quite as user friendly. What is the full error message?
The message I am getting 'Portcom error /dev/ttyS0'.Quote:
Originally Posted by pmb
That's exactly what I had. Look at posts 16 & 19. The default USB port when using an adapter isn't com 1 so needs to be changed under device manager.Quote:
Originally Posted by FOX
(The default USB port when using an adapter isn't com 1)
and needs to be changed to com1..
motherboard comport needs to be changed to allow use of comport1 for usb adapter first
had same problem also change baud rate to same as listed in sssp
works 100% once sorted
Changed to COM1 and baud rate as 115200 as sssp on TM6900 not getting an error but just stopped at the last line below.
---------------------------------------------------------------------------------------
2010/05/29 16:28:20 6048 s **** mpcs newcamd 2.5.0 by Boulmaouahibe<<stdout
2010/05/29 16:28:20 6048 s Cannot open file "./mpcs.sid" (errno=2)
2010/05/29 16:28:20 6048 s userdb reloaded: 0 accounts freed, 1 accounts loa
ded
2010/05/29 16:28:20 6048 s conneting to newcamd-services 1&2....
2010/05/29 16:28:20 6048 s 2593 service-id's loaded
2010/05/29 16:28:20 6048 s 36 lengths for caid guessing loaded
2010/05/29 16:28:20 6048 s monitor: disabled
2010/05/29 16:28:20 6048 s camd 3.3x: disabled
2010/05/29 16:28:20 6048 s camd 3.5x: disabled
2010/05/29 16:28:20 6048 s cs378x: disabled
2010/05/29 16:28:20 6048 s newcamd: disabled
2010/05/29 16:28:20 6048 s radegast: disabled
2010/05/29 16:28:20 6048 s logger started (pid=6072)
2010/05/29 16:28:20 6048 s resolver started (pid=6084, delay=30 sec)
2010/05/29 16:28:20 6048 s proxy started (pid=6096, server=satna.zapto.org)
2010/05/29 16:28:20 6048 s proxy started (pid=6120, server=reserv.mine.nu)
2010/05/29 16:28:20 6048 s proxy started (pid=4300, server=217.113.237.134)
2010/05/29 16:28:20 6048 s proxy started (pid=428, server=bliner-key.dyndns.
org)
2010/05/29 16:28:20 6048 s anti cascading: disabled
2010/05/29 16:28:20 6048 s serial: initialized (pid=5728, auto@/dev/ttyS0)
2010/05/29 16:28:20 6096 p02 proxy satna.zapto.org:1000 newcamd525 (fd=4)
2010/05/29 16:28:20 4300 p04 proxy 217.113.237.134:10000 newcamd525 (fd=4)
2010/05/29 16:28:20 428 p05 proxy bliner-key.dyndns.org:10000 newcamd525 (fd=
4)
2010/05/29 16:28:20 6120 p03 proxy reserv.mine.nu:15001 newcamd525 (fd=4)