Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

24-10-2010, 08:17 PM
andressis2k

Quote:

Originally Posted by DimitarCC

How can i connect the serial cable? Is there thread saying it?
If Yamon is running how can i fix my box? Thanks!

Try this https://www.satpimps.co.uk/showthread.php?t=141544
24-10-2010, 08:27 PM
door

can someone post cccam emu any version for this fw and how to make it work?

Thanks.
24-10-2010, 08:29 PM
moicas3004

Quote:

Originally Posted by feedme

Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?

I think to get 100% good drivers is just round the corner, all features are done , but not in one version .

:bowing-036: to team !:respect-023:

Me too.

After the first reboot no more tunner working.:117:

I also have a second tunner, DVB-C, can be for this?
24-10-2010, 08:30 PM
Abdul1508

Quote:

Originally Posted by andressis2k

Hi. I've got Fixed Astra 19,2 dish
1.0.25 - Ok
1.0.26 - No signal
1.0.27 - No signal

When scan, I get no channels. Signal is 99%, and BER -22% always

What can I do?

Regards

I have the same here with my azbox premium:angelsad2:

1.21 scan - ok
1.25 Scanning - no signal
1.26 Scanning - no signal
1.27 Scanning - no signal
24-10-2010, 08:38 PM
simon30000

1.27 28e scan ok 1085 chans sd/hd ok runnin cccam213
same here with audio loss
thankyou to all involved in this project
u succeded and won ,congrats on makin e2 work on az
:respect-054::respect-054::number-one-043:
24-10-2010, 08:43 PM
door

Quote:

Originally Posted by simon30000

1.27 28e scan ok 1085 chans sd/hd ok runnin cccam213
same here with audio loss
thankyou to all involved in this project
u succeded and won ,congrats on makin e2 work on az
:respect-054::respect-054::number-one-043:

Can you post files for cccam to work and instructions?

thanks.
24-10-2010, 08:45 PM
feedme

Quote:

Originally Posted by feedme

Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?

I think to get 100% good drivers is just round the corner, all features are done , but not in one version .

:bowing-036: to team !:respect-023:

28.2 channels found , diseq with A,B,C,D config stared to work.

sound comes and goes as it wishes.
24-10-2010, 08:47 PM
andressis2k

Quote:

Originally Posted by moicas3004

On first reboot it worked fine but after i restared the box, no longuer i can use the tunner. No signal in PAT!?

Any solution for this?

I isered a list, chanels open fine with cccam, but after that no longuer the tuner recives signal.

version 27.

Quote:

Originally Posted by andressis2k

Hi. I've got Fixed Astra 19,2 dish
1.0.25 - Ok
1.0.26 - No signal
1.0.27 - No signal

When scan, I get no channels. Signal is 99%, and BER -22% always

What can I do?

Regards

Quote:

Originally Posted by feedme

Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?

I think to get 100% good drivers is just round the corner, all features are done , but not in one version .

:bowing-036: to team !:respect-023:

Quote:

Originally Posted by moicas3004

Me too.

After the first reboot no more tunner working.:117:

I also have a second tunner, DVB-C, can be for this?

Quote:

Originally Posted by Abdul1508

I have the same here with my azbox premium:angelsad2:

1.21 scan - ok
1.25 Scanning - no signal
1.26 Scanning - no signal
1.27 Scanning - no signal

Removed the second tuner (DVB-T), re-installed 1.0.27, and all worked great!
On combo boxes, we must do it. Why? I don'k know, but it works :D
24-10-2010, 08:52 PM
onkelm

Hi,

e2 works fine here on azbox-elite.
Sometimes no sound, switching channel helps.
On HD no sound.

1. question
I like to mount a path to my networkdrive.
On my VU+ it is done in auto.network.
But here does not work, any idea ?

2.question
it is not possible to record on usb hardrive so far, or am I wrong ?

however, more than I expected so far - keep going for this perfect work.
:respect-023: :respect-059: :respect-023:

onkelm
24-10-2010, 08:56 PM
paulemh

Quote:

Originally Posted by paulemh

Hello,

I Have a AZbox Elite and i am Install Enigma2 1.0.27 on a HHD not in my DOM, but this Enigma2 only make 3 partition on my HDD what can i do for have the outher partition from my hdd.
I am make the other partition manual with Paragon Partition Manager and format in ext3.

Thanks

and a big thanks for building this enigma2 :respect-046:

Now i have mount manual my outher partition with:
mkdir -p /mnt/hda4
mount /dev/hda4 /mnt/hda4

What i am must set in "/etc/fstab" for mount my new partition autmatic then my box start.
24-10-2010, 09:00 PM
jolatacqce

trying to installe e2 1.0.27,followed @telesat,instructions,but using,azup,get msg .can't connect to host.I used ip adr.which was on vfd.any help would be appreaciated. Q1. Should the ip addr.of receiver be same as it was prior E2.install? The ip adr. showing on vfd is that of my pc.Could this be the reason why Icannot connect? HELP!
24-10-2010, 09:04 PM
moicas3004

Quote:

Originally Posted by andressis2k

Removed the second tuner (DVB-T), re-installed 1.0.27, and all worked great!
On combo boxes, we must do it. Why? I don'k know, but it works :D

Anyone else can confirm that removing the second tuner the signal is no longuer lost?
24-10-2010, 09:20 PM
paulemh

Quote:

Originally Posted by paulemh

Now i have mount manual my outher partition with:
mkdir -p /mnt/hda4
mount /dev/hda4 /mnt/hda4

What i am must set in "/etc/fstab" for mount my new partition autmatic then my box start.

ok final.
I have automount my outher partition with this line in /etc/fstab.

/dev/hda4 /mnt/hda4 ext3 defaults
24-10-2010, 09:23 PM
RogerThis

The_Ripper and MickeySa and the guys:

Please stop posting in this thread. It gone on for long enough.
We have a new section that should be properly utilised.

MOD's Please Lock This Thread!!!
24-10-2010, 09:34 PM
leoleo

Quote:

Originally Posted by moicas3004

Anyone else can confirm that removing the second tuner the signal is no longuer lost?

Yes, confirm !!
24-10-2010, 09:39 PM
Abdul1508

Quote:

Originally Posted by andressis2k

Removed the second tuner (DVB-T), re-installed 1.0.27, and all worked great!
On combo boxes, we must do it. Why? I don'k know, but it works :D

I do not use two tuners. I've only DVB-S2 tuner.
I think the bropleem the drivers fault, the signal is not received correctly.
The ripper can maybe make him or the team, I hope ... :respect-017:
24-10-2010, 09:54 PM
MickeySa

Quote:

Originally Posted by RogerThis

The_Ripper and MickeySa and the guys:

Please stop posting in this thread. It gone on for long enough.
We have a new section that should be properly utilised.

MOD's Please Lock This Thread!!!

Which section and thread ?

You see it is moved in right one AzBox E2 Newbie ?!
24-10-2010, 09:59 PM
MickeySa

If somebody want to make screenshots using Webinterface , use this grab file maded by DDamir.

Place grab file in /usr/bin

Dont forgett chmod 755.
24-10-2010, 09:59 PM
joe 1234567

Ok i will take out my dvb-t and see if that help's
24-10-2010, 10:03 PM
halabessa

@ MickeySa & the Ripper & team

Would you please explain to us why once 1.027 E2 installed & after several reboot..... almost all of us have the sound gone? is it still a problem in tuner driver you are fixing or is there any other technical reason?

Thank you for your usual support:respect-053:
24-10-2010, 10:12 PM
MickeySa

We tryed to explain i think more than 50 times !!!

This will be last time to explain to every lazy user which dont want to use Search option or to search just one single thread.

WE TURNED OFF STC TIMERS, SO THERE IS NO SOUND ON SOME CHANNELS OR THERE IS PROBLEM WITH SOUND !!!

THOSE THINGS WILL BE FIXED IN NEXT RELEASE
24-10-2010, 10:15 PM
MickeySa

Neutrino keymap for AzBox HD

https://www.satpimps.co.uk/showthread.php?t=141557
24-10-2010, 10:18 PM
moicas3004

@MickeySa , do you think, that a second tunner on the box can cause instabilaty in the DVB-S tunner?

I have the signal lost after the first reboot. Guys are saying that they removed the second tunner and that signal lost is resolved.

If you can confirm this, please post officialy in the home page website so all people can act on this subject.
24-10-2010, 10:23 PM
BE-COOL

I also have DVB-T, and after reboot I have no signal, and now I also have a pink background instead of black, crazy azbox lolol.
24-10-2010, 10:25 PM
The_Ripper

@halabessa
I explain why, read again old posts and other topics.
24-10-2010, 10:26 PM
The_Ripper

Regarding DVB-T tuners I will check it
24-10-2010, 10:31 PM
moicas3004

Quote:

Originally Posted by The_Ripper

Regarding DVB-T tuners I will check it

I have the second tunner DVB-C and also after first reboot no signal in DVB-S tunner.

But, this firmware is becoming very good. Thanks to the Developers.
24-10-2010, 11:01 PM
hfmls

Quote:

Originally Posted by MickeySa

@all

SVN will be also soon online, we hope until end of this month.

So everybody can start making AzBox Enigma 2 Images.

:respect-023::respect-023::respect-023::respect-023:
24-10-2010, 11:20 PM
crazy2

enigma2 keymap.xml

Ok button :infobar
Up and Down :Channel
ch+ and ch-:Channel
Left and right :Open service
Exit :exit
İnfo: EPG

http://www.mediafire.com/?gg824y240aczagh
24-10-2010, 11:29 PM
crazy2

serviceeditor
channel hide
/tmp
telnet "ipkg install /tmp/*.ipk" enter

http://www.mediafire.com/?31bbjjqjghyrt6l
24-10-2010, 11:32 PM
hfmls

stupid question, could i map things to get keymap like kathrein enigma2 and azbox hd original firmware?

OK to show channel list, up and down zapping and right left volume change.
infobar in info button.
epg in guide, etc.

i really prefer this method
24-10-2010, 11:33 PM
tx0

just tried v.27. dvb-s ok dvb-s2 no services, wireless driver cannot be configured with e2 interface, volume cannot be changed with remote. also there is no panel to start CAM (blue button)
25-10-2010, 02:02 AM
pazzoider

"No data on transponder"

I have a Azbox elite dual tuner (SAT + DTT)
Fw .27 installed, enabled multiple bouquet from the menu.
Configured the tuner as USALS and enter my coordinates.
Installed list Vhannibal MOTOR(October 23) by enigmEdit through in enigma 2.4 mode(then reloaded settings). The list is displayed correctly.
Unfortunately I can not see the FTA channels.
And the error that you read about these channels is as follows:
"No data on transponder"
If i connect or disconnect sat cable to azbox, I always have signal SNR 99% and BER: -22 on all channels, FTA and encrypted.
Does anyone have any idea what can I do?
Is for a week that are blocked on this issue. I've never seen anything with enigma 2, with none of the versions.
Let me know.
Thank you very much.

PS: The scans work but can not find any channels.The decoder is fully working with official firmware(opensat)
25-10-2010, 02:48 AM
MickeySa

@pazzoider

If You wasn't so lazy to read some posts from this thread. You would find, that You need to disconnect DVB-T tuner ( to remove it from Receiver ), and to try again, it will work ;).

Next time, use search option.
25-10-2010, 02:51 AM
pingflood

@MickeySa,

Don't even waste your precious time. Let'em go.
Someday they'll learn..
25-10-2010, 04:32 AM
gadgeteer

I have the problem in satellite scanning with azbox premium(one tuner). I live in Thailand and use satellite Thaicom5 (78.5E). This sat is not in the list but that's not the problem. I can use other sats and do manual scan instead. I can make satellite scan success just 2 times only(image before and 1.025) and I think it done by mistake. It's because when I reboot the box, the signal is always gone(with the same setting). I've done all sat config(simple, advance, diseqc and use satellites.xml which has my sat from generator) but I can't make it success especially for 1.027

Can anyone help me to solve this problem?? By the way, I've to say enormous thank to The_Ripper and Co for their wonderful project toward azbox hd user.
25-10-2010, 05:34 AM
massimo1167

Quote:

Originally Posted by The_Ripper

Regarding DVB-T tuners I will check it

What you suggest to buy for the next future (what You think will work sooner) internal DVB-T (opensat) tuner interface or usb DVB-T tuner interface (just working with DM800 OE1.6 images)?

thanks!
25-10-2010, 06:25 AM
DimitarCC

Quote:

Originally Posted by jimmyjim11

DimitarCC try this

have not got it going my self tough :confused:

Hmmm it required factory JTAG...... I cant buy it in my country easy! Is there schematics somewhere?
25-10-2010, 06:37 AM
DimitarCC

Quote:

Originally Posted by andressis2k

Try this https://www.satpimps.co.uk/showthread.php?t=141544

Can you give schematics how to build RS232 to TTL interface cable?
25-10-2010, 08:45 AM
arcibald

Quote:

Originally Posted by DimitarCC

Can you give schematics how to build RS232 to TTL interface cable?

You can also use the NOKIA TTL / RS232 DKU5 or USB CA-42 data cable ... ;)

http://pinouts.ru/photos/nokia14_w_ant.jpg

http://pinouts.ru/connectors/nokia14_w_ant.gif

Quote:

Rx is at Nokia pop-port pin 6
Tx is at Nokia pop-port pin 7
GND is at Nokia pop-port pin 8

http://pinouts.ru/images/cable_cell.gif

Here more info:

Code:

http://buffalo.nas-central.org/index.php/Use_a_Nokia_Serial_Cable_on_an_ARM9_Linkstation http://pinouts.ru/CellularPhonesCables/nokia_dku-5_cable_pinout.shtml

or build the interface RS232/TTL (these schemes):

Regards

Arci

Show 40 post(s) from this thread on one page