Enigma 2 by The_ripper - TEST -

Originally Posted by MickeySa View Post
For those with DiseQc not working, download and unpack all files :


For those with DiseQc not working, download and unpack all files :

Go back to previous version of Enigma 2 1.0.25 and do this :

Go in rescue mode :

mkdir /D

mount /dev/hda1 /D

FTP to Receiver :

File cx24116.ko copy to :

/D/lib/modules/2.6.22.19-19-the_ripper/extra/

When asked to Overwrite, say Yes

File Tunerinfo.py copy to :

/D/usr/lib/enigma2/python/Components

File enigma2 copy to :

/D/usr/bin

When asked to Overwrite, say Yes


Remove USB Stick, and turn off and turn on receiver so all will work.

https://www.satpimps.co.uk/showthrea...135894&page=81

I'm testing the new release.

DiseqC work on Astra/Hotbird ,i got all channel by scannig those 2 sat

Sky 3D HD on Astra 19.2°E is working
Das Erste HD is working (Astra 19.2°E)
ZDF HD is workin (Astra 19.2°E)
Einfestival HD is working (Astra 19.2°E)
Cccam is working in all encrypted channel HD and SD ,on both satélite Astra -hotbird
I have no sound on many channel (some time got it by playing with "RESOLUTION" button remote control)

Quote:

---

Originally Posted by Abdul1508

and it worked?

---

YEst it's working ,i use DCC 2.95 ,on i transfer file one by one

Open DCC tranfet the first file ,close DCC ,open DCC transfert the second file ,close DCC ,open DCC trnasfer the tird file.
Reboot Azbox

Thanks for all the hard work last night. The project is really coming along. Nice to see you have a website up and running azbox-enigma.eu :respect-040:

Will the new website be the main place for downloads from now on?
All that's missing is the howto section. If you need a hand with that I'm a native English speaker.

Also big thanks to satpimps for the dedicated section! :respect-055:

Have you decided on the official name for the image and team?
The Ripper? E2 Azbox? azbox-enigma?

Is disecq motor working with usals now?

i am watching F1 with no problems at all using 1.0.25 and mgcamd...
Excellent job...

Seem to be getting this error at about 30% of updating.Tried uninstall of azup and delete telsat folder then re install :07:

Quote:

---

Originally Posted by albaki77

Seem to be getting this error at about 30% of updating.Tried uninstall of azup and delete telsat folder then re install :07:

---

just tried a new USB stick and problem solved :respect-010:

pise mi geeko : p sta sada da radim

Quote:

---

Originally Posted by MoRpHiUS_x

Screenshot failure.

http://img146.imageshack.us/img146/6716/azboxhd.th.jpg

This issue is resolved as stated MickeySa, or otherwise?.

Is failure of botloader in flash?.

Thanks!

PD: I tried doing what it says the file on recovery.rar, but still staying in booting

---

hi! I have the same problem! Furst E2 was boot OK! After that i was service scan and after that i was decide to restart the receiver! After that that screen showed up! How can i fix that? I dont have serial cable but i have telnet and FTP access to the box! Please someone help me! Thanks!

Quote:

---

Originally Posted by pegaman

i am watching F1 with no problems at all using 1.0.25 and mgcamd...
Excellent job...

---

Hi,

Are you using mgcamd as EMU (i.e. using softcam and not CS)?
Is there a way to download the latest softcam directly from the box (like we used with TechSat plug-in with original firmware)

Thanks.

PS: Congratulations to The Ripper and rest of the team for the excelent work being done.

Quote:

---

Originally Posted by fcis7000e+

Hi,

Are you using mgcamd as EMU (i.e. using softcam and not CS)?
Is there a way to download the latest softcam directly from the box (like we used with TechSat plug-in with original firmware)

Thanks.

PS: Congratulations to The Ripper and rest of the team for the excelent work being done.

---

Hi i am using mgcamd as CS. There is a post for this and how to enable autostart.

@DimitarCC
@MoRpHiUS_x

Hi
You have to check if there is working Yamon. You can do this with serial cable. If Yamon is working - there is relative easy solution of the problem.
if Yamon is broken (zboot (1) failed) - There are two possible options:
- Removing NOR flash and programing content with external flash programmer, and re-soldering it again on the PCB.
- using JTAG for flashing broken NOR flash
check this:
1. http://www.pristavka.de/index.php?topic=6691.0
2. http://www.pristavka.de/index.php/topic,5763.0.html

Regards!

Quote:

---

Originally Posted by stra

@DimitarCC
@MoRpHiUS_x

Hi
You have to check if there is working Yamon. You can do this with serial cable. If Yamon is working - there is relative easy solution of the problem.
if Yamon is broken (zboot (1) failed) - There are two possible options:
- Removing NOR flash and programing content with external flash programmer, and re-soldering it again on the PCB.
- using JTAG for flashing broken NOR flash
check this:
1. http://www.pristavka.de/index.php?topic=6691.0
2. http://www.pristavka.de/index.php/topic,5763.0.html

Regards!

---

actually after using repair package i was able to get to usb upgrade menu. from that point can i fix my box? But remote is not reacting

guys, just woke up, how is the situation?
latest E2_AZBox_1.0.26 works ok cccam in scrambled channels
dvb-s2 too?
thank you.

Quote:

---

Originally Posted by albaki77

Seem to be getting this error at about 30% of updating.Tried uninstall of azup and delete telsat folder then re install :07:

---

I've go same error and my solution was:

ATTENTION:
Please check if in usb there are at least 60-70 MB of free space after AZUP upgrade.
This space is needed to create CRAMFS in usb.
Otherwise you get that error

i have trouble setting up cccam. Can anyone help me?

Quote:

---

Originally Posted by hfmls

guys, just woke up, how is the situation?
latest E2_AZBox_1.0.26 works ok cccam in scrambled channels
dvb-s2 too?
thank you.

---

1.00.26 need fix to work proper but dvb-s2 with cccam working in 1.00.25 with old 8634.ko and diseqc is working too.

how does the channel list works cant seem to sort it out good i cant find my bouqets?

you have to enable multiple bouqets

scaned in 28e dvbs2 nicely. latest version is nice. i going to wait for the repack later today/tonight
emus not working with this version
is there a file that i can add , rather than rollin back to previous version ? for emus

Quote:

---

Originally Posted by simon30000

scaned in 28e dvbs2 nicely. latest version is nice. i going to wait for the repack later today/tonight
emus not working with this version
is there a file that i can add , rather than rollin back to previous version ? for emus

---

'

go to page 68 or 69 and download the 8634.ko replace it and install emu's. im using 1.00.25 btw and cccam 2.1.4 is working

here with .25 firmware and the files works great, scaning, emu, hd chanels on 30W, all fine.

Just the sound lost if i go directly from list to chanel. If a zap the sound is good.

Quote:

---

Originally Posted by stra

@DimitarCC
@MoRpHiUS_x

Hi
You have to check if there is working Yamon. You can do this with serial cable. If Yamon is working - there is relative easy solution of the problem.
if Yamon is broken (zboot (1) failed) - There are two possible options:
- Removing NOR flash and programing content with external flash programmer, and re-soldering it again on the PCB.
- using JTAG for flashing broken NOR flash
check this:
1. http://www.pristavka.de/index.php?topic=6691.0
2. http://www.pristavka.de/index.php/topic,5763.0.html

Regards!

---

no-one on this site seems to have used the JTAG sucessfully yet.
I am awaiting delivery of a "universal JTAG adapter" to see if i can progress.


https://www.satpimps.co.uk/showthread.php?t=140894

how can cccam autostart, the init.d script is not working for me?

Quote:

---

Originally Posted by kooleracer

how can cccam autostart, the init.d script is not working for me?

---

in this file : /etc/init.d/bootup
make this change in this line :
echo 66 > /proc/progress
/usr/bin/CCcam

cccam working great sd/hd on new version 1.26
using previous em8634dvb driver

finaly no multicas hickups anymore, cccam is really big improvement. happy e2 1.00.25 user. Only prob is de sound an rc control setup.

I do not get the service to scan everyone seems to work except me.
I've tried almost everything as well as enigma 2_1.26 and 1.25.
except only the enigma 2_1.21 does the scan with me.I do not know why,:confused:
is there a difference between the azbox premium and elite.

@Abdul

It is obviously not working for You as You didnt read my post. Go to 1.0.25 version, change enigma2, cx.ko file and tunerinfo.py ......

how can i make a file that excute this command when azbox is booting up:

cd /usr/bin

./CCcam.mipsel -dC /etc/CCcam.cfg

Quote:

---

Originally Posted by MickeySa

@Abdul

It is obviously not working for You as You didnt read my post. Go to 1.0.25 version, change enigma2, cx.ko file and tunerinfo.py ......

---

I got what you've already posted all the files replaced with DCC 2.95, but it was constitutional.
strange is that the scan with enigma2_1.21 prefct works.

Hi

I tried to install E2_AZBox_1.0.26 last night on my AZbox Premium but I cannot get it to load properly or reload the previous firmware 0.9.5020

I first installed AZUP 1.1 on my PC.
Then I inserted a USB flash drive with the new patch.bin on it and booted.
The patch ran up to 100% and I rebooted. I removed the USB flash drive.

When rebooting, the front display reads “Booting” then “USB Check!” then “Rescue Mode”.
When “Rescue Mode” appears I choose “OK” on the handset. Then the box’s IP Address is displayed.

The IP Address is displayed when I boot with and without the USB flash drive inserted and with and without having pressed “OK” either on the handset or the OK button on the front of the box.

When I enter the IP Address in AZUp and press “Update” it tries to connect and login but shows that it is Not Responding. After around 25 seconds a message saying “Other error – Unable to Complete Request“ with an “OK” box appears. When I click on “OK” nothing happens but AZUp.exe is still working in the background using 50% of CPU resources according to Windows Task Manager.

When I close AzUp I get the message “Project1 is not responding”.

I have uninstalled and reinstalled AZUp 1.1 but this has made no difference.

I have looked for a solution but cannot find one. Can anyone help me either load 1.0.26 or revert to 0.9.5020?

Thanks

Quote:

---

Originally Posted by SPF

Hi

I tried to install E2_AZBox_1.0.26 last night on my AZbox Premium but I cannot get it to load properly or reload the previous firmware 0.9.5020

I first installed AZUP 1.1 on my PC.
Then I inserted a USB flash drive with the new patch.bin on it and booted.
The patch ran up to 100% and I rebooted. I removed the USB flash drive.

When rebooting, the front display reads “Booting” then “USB Check!” then “Rescue Mode”.
When “Rescue Mode” appears I choose “OK” on the handset. Then the box’s IP Address is displayed.

The IP Address is displayed when I boot with and without the USB flash drive inserted and with and without having pressed “OK” either on the handset or the OK button on the front of the box.

When I enter the IP Address in AZUp and press “Update” it tries to connect and login but shows that it is Not Responding. After around 25 seconds a message saying “Other error – Unable to Complete Request“ with an “OK” box appears. When I click on “OK” nothing happens but AZUp.exe is still working in the background using 50% of CPU resources according to Windows Task Manager.

When I close AzUp I get the message “Project1 is not responding”.

I have uninstalled and reinstalled AZUp 1.1 but this has made no difference.

I have looked for a solution but cannot find one. Can anyone help me either load 1.0.26 or revert to 0.9.5020?

Thanks

---

please!!! please. read a litle more.

will this version work on a prem plus box .
thanks

Quote:

---

Originally Posted by gorgeit

will this version work on a prem plus box .
thanks

---

no,you have to wait.

Hi, when Premium DTT will be supported?

It is a very important feature for me... if it is supported I let Opensat buggy firmware alone FOREVER :rofl:

thanks
i admit im inpatient to try it.

or even impatient

Quote:

---

Originally Posted by gorgeit

or even impatient

---

I would say stupid and lazy since it mentioned a million times before in this thread.