Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

28-09-2010, 04:37 PM
slegs

Quote:

Originally Posted by vrlika

I have read on some other posts that usals motor setting doesnt work well with E2 is this true ?

CAn be fiddly to setup but once working its fine
28-09-2010, 04:57 PM
Carp95

Quote:

Originally Posted by vrlika

I have read on some other posts that usals motor setting doesnt work well with E2 is this true ?

Well we have very good power supply on Azbox:respect-055:
28-09-2010, 05:22 PM
gravatasufoca

I hope the ISDB-T Tuner had its driver to E2 too.
As a matter of fact, I hope we have everything that hardware can support....
28-09-2010, 06:42 PM
4@@@@

I'm still digging in the deep of the E2 files. The problem is, that I can't "see" the roofs when the system is booted with E2 - it looks as if the The_Ripper does a remount of /MMP to / (or mount -o bind or chroot) .
These magic steps are out of my reach at the moment.

I see the enigma.sh in inittab the bootup file - but I miss the part before the remount.

Maybe someone can help here? At the moment it tries to use wrong binaries and modules.

If I use chroot - I see a bit more.

AZBox[init.d]$ lsmod
Not tainted
em8634dvb 491336 1 - Loading 0xc8991000 (PF)
cx24116 84320 1 em8634dvb, Live 0xc88ea000
em8xxx 2514624 1 em8634dvb, Live 0xc8b49000 (PF)
llad 124320 2 em8634dvb,em8xxx, Live 0xc88b2000 (P)
irvfd 13072 1 em8634dvb, Live 0xc8887000 (P)
tangox_ehci_hcd 44464 0 - Live 0xc8891000

AZBox[init.d]$ /usr/bin/enigma2.sh
/dev/dvb/adapter0/video0: No such device
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
/dev/fb/0: No such file or directory
+ (9) gLCDDC
couldn't open LCD - load lcd.o!
lcd buffer 0x698b28 8448 bytes, stride 132
+ (9) GFBDC
/dev/fb/0: No such file or directory
framebuffer not available.
FATAL: no framebuffer available
Segmentation fault
28-09-2010, 08:46 PM
kanber_kav

Quote:

Originally Posted by 4@@@@

I'm still digging in the deep of the E2 files. The problem is, that I can't "see" the roofs when the system is booted with E2 - it looks as if the The_Ripper does a remount of /MMP to / (or mount -o bind or chroot) .
These magic steps are out of my reach at the moment.

I see the enigma.sh in inittab the bootup file - but I miss the part before the remount.

Maybe someone can help here? At the moment it tries to use wrong binaries and modules.

If I use chroot - I see a bit more.

AZBox[init.d]$ lsmod
Not tainted
em8634dvb 491336 1 - Loading 0xc8991000 (PF)
cx24116 84320 1 em8634dvb, Live 0xc88ea000
em8xxx 2514624 1 em8634dvb, Live 0xc8b49000 (PF)
llad 124320 2 em8634dvb,em8xxx, Live 0xc88b2000 (P)
irvfd 13072 1 em8634dvb, Live 0xc8887000 (P)
tangox_ehci_hcd 44464 0 - Live 0xc8891000

AZBox[init.d]$ /usr/bin/enigma2.sh
/dev/dvb/adapter0/video0: No such device
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
/dev/fb/0: No such file or directory
+ (9) gLCDDC
couldn't open LCD - load lcd.o!
lcd buffer 0x698b28 8448 bytes, stride 132
+ (9) GFBDC
/dev/fb/0: No such file or directory
framebuffer not available.
FATAL: no framebuffer available
Segmentation fault

The_Ripper enigma DFB enigma2 or FB enigma2 ?
28-09-2010, 09:28 PM
4@@@@

It's the enigma2 of The_Ripper put on the HDD.
28-09-2010, 10:10 PM
VFL

@the_ripper still now i had told u bout router change with enabled DHCP-server and for display still show geeko and nothing happne not show on VFD usb or recoved modus only boothing then geeko, u told me that i sould try other router it some cant do anything what can i do?
i have some what u did writh!
28-09-2010, 10:41 PM
roony123

Quote:

Originally Posted by VFL

@the_ripper still now i had told u bout router change with enabled DHCP-server and for display still show geeko and nothing happne not show on VFD usb or recoved modus only boothing then geeko, u told me that i sould try other router it some cant do anything what can i do?
i have some what u did writh!

hello THE RIPPER

actualy am having same problem aswell and i have done all the above mention
solutions including changing router aswell but its still same.
when i reeboot the azbox on azbox display a message appears (booting)
and then it just shows (geeko:p) and then nothing happens.

i can restart from remote but thats it nothing works apart from reboot.

regards
28-09-2010, 10:47 PM
xanadu

Quote:

Originally Posted by roony123

when i reeboot the azbox on azbox display a message appears (booting)
and then it just shows (geeko:p) and then nothing happens.

Did you use AZUP and enter your IP address?
28-09-2010, 10:53 PM
roony123

hello thnx for the quick reply

it doesnt show any ip or anything els it just says booting and them comes up with geeeko

i have tried with different usb sticks and different routers.

regards
28-09-2010, 10:55 PM
VFL

Quote:

Did you use AZUP and enter your IP address?

Quote:

Originally Posted by roony123

hello thnx for the quick reply

it doesnt show any ip or anything els it just says booting and them comes up with geeeko

i have tried with different usb sticks and different routers.

regards

yes some me nothing show on VFD just boothing then come geeko and nothing else, i have Azbox Premiums HD not plus

thnk for replay
28-09-2010, 10:59 PM
xanadu

If you leave the USB stick in the Azbox with the patch.bin file and reboot, it should boot in Rescue mode and display the IP address of your box in the VFD.

Then you can use AZUP.
28-09-2010, 11:08 PM
roony123

hello

yes i am booting with usb inserted and without but still no joy.

regards
28-09-2010, 11:10 PM
VFL

Quote:

Originally Posted by xanadu

If you leave the USB stick in the Azbox with the patch.bin file and reboot, it should boot in Rescue mode and display the IP address of your box in the VFD.

Then you can use AZUP.

i did try without USB no show anything still some geeko and stop. some @roony too!

2.nd msg

maybe i need format the DOM then put again or what else can i do
28-09-2010, 11:17 PM
xanadu

Quote:

Originally Posted by roony123

hello

yes i am booting with usb inserted and without but still no joy.

regards

If you have a router can you not see the IP address in your local network?

Then you can use AZUP.

If your router is using DHCP then the Azbox would normally choose the first available IP in selected range of the router.
28-09-2010, 11:20 PM
VFL

Quote:

Originally Posted by xanadu

If you have a router can you not see the IP address in your local network?

Then you can use AZUP.

If your router is using DHCP then the Azbox would normally choose the first available IP in selected range of the router.

on Router i see DCHP-Tabelle only my pc latop Dreambox no other show on the DHCP-list. and that too the Tools IP scan some like router DHCP-list for Azbox doesnt show VFD Recoved Modus

thk
28-09-2010, 11:30 PM
xanadu

When you have Geek:0 on the VFD, did you press Menu key on the remote, or exit key?

Sometimes I found this would have some effect.
28-09-2010, 11:32 PM
VFL

Quote:

Originally Posted by xanadu

When you have Geek:0 on the VFD, did you press Menu key on the remote, or exit key?

Sometimes I found this would have some effect.

well i try many press button nothing happned that too exit or menü or OK press only staby power then they going reboot.
28-09-2010, 11:35 PM
xanadu

Quote:

Originally Posted by VFL

well i try many press button nothing happned that too exit or menü or OK press only staby power then they going reboot.

I don't know what else to recommend, as leaving USB memory with patch.bin in the receiver should boot Azbox in recovery mode and display the IP in the VFD.
28-09-2010, 11:36 PM
leao6

Quote:

Originally Posted by hfmls

it will come out when the_ripper is finished...do what telesat asked...chill out and stop asking questions about release :)

ah! ah! ah! who saw you and whom you see

Show 40 post(s) from this thread on one page