Quote:
Originally Posted by Nozahic
have you installed a ipk over the top of your previous install, that will explain why the oscam.server files have been changed? you will need to add the fransat reader info again.
has your receiver ip changed?
Printable View
Quote:
Originally Posted by Nozahic
have you installed a ipk over the top of your previous install, that will explain why the oscam.server files have been changed? you will need to add the fransat reader info again.
has your receiver ip changed?
I think I update a new ipk file , I think Mickha was talking about that.
About the Fransat change I need to write that to all of them , like before or to just one time and delete all the other thing who are on my Oscam.serv file . Because you have a lot now on my new Oscam serv file.
I will look on my box if my ip change
Regards
also i still connect to fileZilla with 192.168.1.65
and on the vu+ Dreambox Webcontrol under Extra / Device info , i have that :
Network Interface (eth0)
Mac Address:
None
DHCP enabled:
False
IP:
192.168.1.65
Netmask:
255.255.255.0
Gateway:
192.168.1.1
i have that in my oscam file : ( i need to change the info to the 3 reader or just the first one and delete the rest
[reader]
label = Focussat-Conax
enable = 0
protocol = internal
device = /dev/sci0
pincode = 1234
services = focussat,!freesatviaccess,!freesa tconax
lb_whitelist_services = focussat
caid = 0B02
ecmwhitelist = 4E,53,60,65,72,84,9C,97,8A
detect = cd
ident = 0B02:000000
group = 2
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
[reader]
label = TVR-Freesat-Viaccess
enable = 0
protocol = internal
device = /dev/sci0
services = !focussat,freesatviaccess,!freesa tconax
lb_whitelist_services = freesatviaccess
caid = 0500
ecmwhitelist = 2F,61
detect = cd
ident = 0500:025900,025910,FFF720
class = 0a,1e
group = 3
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
auprovid = 025900
[reader]
label = TVR-Freesat-Conax
enable = 0
protocol = internal
device = /dev/sci0
pincode = 1234
services = !focussat,!freesatviaccess,freesa tconax
lb_whitelist_services = freesatconax
caid = 0B02
ecmwhitelist = 67
detect = cd
ident = 0B02:000000
group = 4
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
if you don't have any of those cards then just delete them
Ok, I delete them and put what you say to me b4 for Fransat , correct ?
I change the Oscam server configuration, what I need to do now
Regards
I still can't access to oscam web interface, I don't know why . Need help,
Hi guys
Hope you are ok ? I still need your help because I am lost now because it look like nothing is working properly since I try this update
Can you help me please
Cheers
Can you please post a picture, of your receiver, showing the cams, by pressing the Blue key, on your remote.
This will show which version you last loaded, and have selected.
Hi Mickha
Thank you for your reply. Below pic of the Oscam
But I notice if I press <>. I have to new Oscam Oscam-emu11233. And Oscam 11233
Maybe I need to change this settle because it look like I am on my old Oscam , like I post to you few days ago
Regards
try switching to the new oscam and login to the interface, if that doesn't workQuote:
Originally Posted by Nozahic
copy all the config files, oscam.server, oscam.conf etc to your pc then place them in usr/keys and reboot, then see if you can login into the oscam interface.
if none of those work try a different oscam, google for oscam compatible with your image. post back here once you have it running with access to the web interface.
Ok I will try that but other way I will connect one of my other box and see if I am more lucky with the web interface
Hi Guys
I try everything with my box for have a web interface but nothing work, 😪
I decide to connect one of the other box, and I mange to find the satellite and put all the channel ( on my own, good step ) 😉
Now I put the web interface pic I take on the computer with all the settle. Maybe you will see why we have a problem
Also just for remind you , this 3 box was working and sharing a sky card in Spain. Maybe the settle of the web interface need to be change
Regards
I send a email to the company who settle the box for me when I was in Spain because for me this Oscam work but because this guy settle my 3 box together for work with sky card , maybe the settle on the web interface don't work when I put the Fransat card because the settle is fix for sky card. I look a little in the web interface and everything is for sky card, all the channel, card name ect.
I will let you know when it reply or maybe you have a idea to change that
Regards
Good evening
The guy of the company reply to me and we exchange few email, it look like my Oscam is maybe too old for read the Fransat card. I need a new Oscam setting who work with Fransat , the guy say to me you have a lot of Oscam and he is not sure witch one will work with Fransat.
Now sorry to be little blonde or stupid, I would like to know if I can have a Oscam who will work with Fransat, and explain to me how to do this update properly because and the last box , it look like I update so many thing, my box is lost now 😂😂😂
I know it will take some time of you but I am new and try to learn and it is not easy. ( also I don't need to change other thing in my box )
Thank you in advance for your reply and good evening
The thread is very confusing, do you know if you have Viaccess or Conax card to start with ?
Like I say I am new on that, I don't know : how I can look at that ? Maybe I can look and let you knowQuote:
Originally Posted by sonic1
Sorry can be more clear
He has stated that it's a Fransat card, used on 5 West, so it's Viaccess 4.0 encryption.
He does have an official receiver, in which the card works, but not an official Viaccess CI+ Cam, hence the attempt to get it working using his VU+ receiver and Oscam.
my head is battered trying to help the guy. Stuff gets lost in translation :(Quote:
Originally Posted by sonic1
think the easiest solution would be for him to install a repository panel such as tspanel, check his receiver information-about to determine the image running then search the panel for oscam that's compatible with that.
edit:
or flash a new image containing a recent version of oscam.
He's currently running a very early version of Blackhole, which I think was set up for him.
I also seem to remember him using the 3 receivers to share a Sky card.
It might be better if he installs the same image as you, 3tv, and the same version of Oscam, as you're the only one with a Fransat card, that's working.
im using a solo 4k version from SU that's using the new Biss mod, I just drop the oscam binary into the usr/bin folder and reboot, I haven't touched my config files for ages. My fransat reader info is already posted in this thread but have no idea if its been implemented correctly as I noticed a few images back he had it opened with notepad, which is just asking for trouble :(
were ****ing in the wind until Nozahic gets the interface running so we can see if its reading the card correctly via the logs
Hi all
And thank you for you message, I understand this situation is not easy for you because I am not so good
I will try few thing for find more info and let you know, the guy who settle my box, say my oscam is working fine, he still used that for do his box at the moment
Regards
Is he using a Fransat card, on his VU+ receiver?
Oscam is an emulator, used for numerous cards, and other things.
Sorry guy
I am a slow learner but I learn, after I mess about my first box, I manage to settle my second box, now I need your help for the final touch
Let me know what you need from my box and i will try my best for pass you the info
Regards
you now have access to oscam interface after upgrading to as newer version?
Waiting to know witch version I need, maybe you can give me a version
Regards
going around in circles now.Quote:
Originally Posted by Nozahic
Good afternoon
I try to put a new Oscam, the one 3TV talk about ref 22, when I unzip the file I have 5 files
Oscam.conf
Oscam.server
Touch
Tuxtxt2.conf
Oscam
At the moment I transfer all this file to /usr/ bin. I did turnoff my box after
And when I want to open the interface nothing again. I am lost because this morning my interface was opening but now nothing
Someone can help
Regards
You are still downloading the wrong file, I have posted this before, please make sure that you're downloading the file in post #22.
The Who Downloaded information shows that you have downloaded the file, in post 22, 4 times, and downloaded the file, in post 23, 8 times.
I download the post 22 of 3TV after I download I unzip and I have 5 file like say in my last post
I put all of them ? That is good or just need to only few of them
Also when I put back my box on, I have this message, good or bad, I am still waiting
Regards
Why have you set up the EPG option?
This time don't download the file, instead select the open option, and you should then only have one file.
I think you're selecting the wrong file.
https://www.satpimps.co.uk/showthrea...l=1#post961436
the process seams to be beyond your abilty. your better off installing a new image that includes oscam or a panel to install it.Quote:
Originally Posted by Nozahic
Dear Mickha
I didn't set up EPG options, like I say I just put the 5 file and reboot my box
At the end 3TV say it s too hard for me, now I will try to put a image with Oscam
I will find that on google
I have a question because all my box has been settle from someone, can I delete all and try to build a new one, because for me it look like a lot of interference from how my box has been settle
Regards
https://www.satpimps.co.uk/showthrea...ting-up-Vu-Duo
https://www.satpimps.co.uk/showthrea...-USB-Pen-Drive
Hopefully 3tv will recommend a suitable image, Openvix might have the option to download Oscam, via the menu, but I haven't tried it.
i will wait for see if 3tv can pass a good image, other way i will try to find on google
i connect myself to a french forum this afternoon, we will see what they say
i need a new image with Oscam in ? or you download image and after oscam
because i think 3tv say to download image with oscam
no idea which image recommend on v1 duo recievers, have a look on satuniverse
Thank guys
Tomorrow I will try to put a new image and oscam on the first box where I mess up everything, we will see the result and I will let you know when is finished
It will take maybe few days because I need to find the image and oscam and also to learn how to do. I will read the info Mickha you send me about that.
What is it the best black hole or openvix ?
Regards
Alain
Blackhole is based on the official image, and you have to manually load Oscam, so try Openvix, unless the French forum can provide better information.