http://img440.imageshack.us/img440/4673/75976983.th.png
I bet there are some non-IT people on this forum, who are not too familiar with Linux etc.Quote:
Originally Posted by kanber_kav
I bet a few will need some simple, straight-forward advice how to use the complete package that K_K put up in this thread... So... Here is how I did it...
Following The_Ripper's great work and advice, I used K_K's version of T_R's files, and I installed the package like so:
1) I downloaded cccam-azbox-2.1.1 [= "emu.rar"] archive from K_K's post.
2) I decompressed it by right clicking on it [using 7zip -> "Extract here"]. I got EMU folder and in it 2 sub-folders:
-libs
-OpenXCAS
2a) I went into the libs folder and edited CCcam.cfg to put the details of my peer's server, as advised in the file itself [added this line under #C: line in the file]:
2b) I went into OpenXCAS folder and edited the following files [in order to make them correspond to what I have in my AZbox HD, so you need to do the same in accordance with your setup]:Quote:
C: peer.DynDNS.something port username pass
-module.seq [this one is a must]
-openxcas.conf [I am told this one isn't a must but I did it anyway... ;)]Quote:
dvbapiCAS
#MboxCAS
#mgcamd
#incubusCamd
#CCcamCAS
#MultiCAS
#newcs
#SCDXCas
3) I used FileZilla to FTP to my AZbox HD receiver and copied the lib folder into the folder EMU, then went into it and gave rights, i.e. CHMOD -> 755 to all the files inside.Quote:
[modules]
count = 7
active_auto = true
active_1 = dvbapiCAS
active_2 = MboxCAS
active_3 = incubusCamd
active_4 = MultiCAS
active_5 = CCcamCAS
active_6 = mgcamd
active_7 = newcs
[module_1]
name = dvbapiCAS
path = EMU/OpenXCAS/dvbapiCAS
daemon = emu_module
version = 0.1
[module_2]
ap= Yes
name = MboxCAS
daemon = mbox_module
wait=13 sec
version = 0.6_10
[module_3]
name = incubusCamd
path = EMU/OpenXCAS/incubusCamd
daemon = incubusCamd.sh
version = 0.55
[module_4]
name = MultiCAS
daemon = emu_module
version = 1.57D-4T11-6B
[module_5]
name = CCcamCAS
daemon = cccam_module
version = 1.00
api=No
wait =10sec
[module_6]
name = mgcamd
daemon = mgcamd
version = 1.32
# argument = -a 3
[module_7]
name = newcs
daemon = newcs
argument = -nd
version = 1.6
xcasapi = FALSE
4) Then, I copied the content of the OpenXCAS folder from my HDD into the AZbox HD OpenXCAS folder. I went into the folder itself and gave CHMOD to 755 to the module and .sh file.
5) I didn't even have to reboot, I just restarted all the EMUs [via the Fast Forward button -> yellow button], then just the dvbapiCAS with the OK button.
It worked!:respect-023::respect-023::respect-023:
:respect-051:
I tested this using payserver and it works beautifully.
Great grat work the_ripper!!!!!! and thanks to kanber_kav for scripts!
i have to run sh dvbapi.sh manually via telnet...dunno why. i have all correct.
working now
Hi
I can run script from prompt no probs but can not via Openxca pannel. *** Forget this I now have it working just zapped chanels *******
Ths is one very happy Azboxer got the New card HD working.
hello friends...
seca ok 100%
nagra 3 ko...
nagra 3 ok here.
hispasat
Hi People have just tried this with a C line and N line and seems to be working really well.
Special thanks to all who have worked hard to get to this stage. Just about to sit down and watch the Ashes (Cmon Aussie !!)
in principle by astra channels in the D + hd
I was not open,
I testing
RealCCcaminfo very soon :D
nagra 3 ok testing with new cline e 100% ok
thank you :)Quote:
Originally Posted by kanber_kav
can u use arial bold font please?
i use that in azbox hd menus, and it's the most clear font i ever used in azbox hd :)
New Uk Sly white card and HD Ok on C line and paid server
Can someone pls report about stability and auto-reconnect??
Thx in advance!!
cu
KJ
it's stable. sometimes it has some flaws. but nothing that can't be fixed :)
what do u mean autoreconnect?
Hi guys,
I have deleted all other cams I start cccam via telnet and try to start dvbapi but get this error I have re-booted several times and also started from scratch
any ideas are appreciated
Created CaPMT Socket
Creating openxcas API message thread ...
Thread Started
Creating response thread ...
Thread Started
Waiting for connection ...
Quote:
Originally Posted by enrico001u
try changing channels
tried that mate
tried sky uk,sky it and nova etc..
cccam works even if device wakes up after stand-byQuote:
Originally Posted by kleinerjunge
do u have cccam allready running?Quote:
Originally Posted by enrico001u
u run dvbapi after run cccam
One question,
Only works like server if have one local card? or can reshare?
guys!!! read posts!!
this is REAL CCCAM 2.1.1
SO:
SERVER
CLIENT
RESHARE
OPEN CHANNELS
ETC ETC ETC :) ALL WORKS LIKE IN DREAMBOX. (use newcs to read card)
yes I reboot start cccam which works cos I can see on cccaminfo
I then start dvbapi but get that error.
Created CaPMT Socket
Creating openxcas API message thread ...
Thread Started
Creating response thread ...
Thread Started
Waiting for connection ...
Try the Kanber_Kav package and forget about CCcam -> via dvbapiCAS only... ;)
Quote:
Originally Posted by hfmls
oK wonderful because i havent local then i could reshare at least. Because without works like server nobody want to share
that's not an error.
use new tutorial:
https://www.satpimps.co.uk/showthread.php?t=112811
Thanks I will try now
Cheers
There is one just a few posts above this one.... post no. 125, by me... ;) :)Quote:
Originally Posted by hfmls
I have this working now I dont how but it is
I would like to thank RIPPER,hfmls,goran,kanber_kev and everyone who helped with this project.
Roll on a decent epg!!!!!!
I bet there are a few guys at Dream Multimedia that have brown marks in their pants right now.
Once again thanks to everyone that makes this possible, again you have taken the Azbox to a new level.
Lets here the Dreambox lovers argue that the Azbox is no good now.
Yoda
LOL:woohoo-022::woohoo-022:Quote:
Originally Posted by Yoda
@K_K and The Ripper:respect-061::respect-061::respect-061::respect-060::respect-060:
There seems to be a problem with recording to internal HDD.
Recording mode works but the files don't playback.
Which way are you trying to play them back?
I have tried 2 ways to play back.
From the Recorded movies directory after selecting Movie from Home menu and going to directory.
Pressing Menu button and Recorded Program list.
The first method tells me can't playback this filetype.(Not Supported)
With auto-reconnect i mean:
- does cccam work after switch from standby? (--> works, confirmed by Taykun)
- does cccam of azbox reconnect itself after disconnecting from server because of several reasons (server shutdown; bad internet connection; internet disconnection because of provider disconnecting after 24h; etc.)
Can someone confirm 2nd point???
Thx.
cu
KJ
Quote:
Originally Posted by kleinerjunge
I disconnected power from my router which obviously drops the internet connection to server.
Then later, reconnected power to my router, and did not have to touch Azbox HD at all for the program to clear again.
What about original CCcam on AzboxHD as Emulator? Does it work if keys are present??
Pls confirm. Thx!
cu
KJ
it is working!
watching digi tv on 1° west, with valid keys in softcam.key wright now ;)
u just have to edit the cccam.cfg and set the line, where cccam can find the softcam.key....default is /var/keys/ or something, you have to change it to, for example to /EMU/lib/ and then copy the softcam.key to the folder /EMU/lib/ on your AzBox HD
I discovered that not all channels work. For example. cccam 0.2 : ORF HD works great
NATIVE cccam: ORF HD doesnt work
Can someone confirm this?
Thanks