Enigma 2 by The_ripper - TEST -

Help Please !!!

AZBOX Elite it remains in REBOOTING.

Quote:

---

Originally Posted by MoRpHiUS_x

Help Please !!!

AZBOX Elite it remains in REBOOTING.

---

put a formated fat32 pen with patch.bin inside, reboot in the hardware switch, the box will enter recovery mode, give you a ip, after that, run azUP

Quote:

---

Originally Posted by tul

put a formated fat32 pen with patch.bin inside, reboot in the hardware switch, the box will enter recovery mode, give you a ip, after that, run azUP

---

It does not work.

It remains in BOOTING doing ringlet.

@MoRpHiUS_x
What have you done before reboot ?

Restore to oficial firm 0.9.4890

Show IP 192.168.1.2 i used AzUP and press Update.

Show message After Rebooting, read message on the OSD.

Display VFD showing Rebooting...
------------------------------------

has since been REBOOT

do u get ftp connetion?

No, I can not get connection

turn off the box

Flashing old kernel from original FW 2.6.15 failed, so without serial interface you are stuck.

any solution?

Quote:

---

Originally Posted by moding

i can not get my internal HDD recognized!

i am first trying to initialize my internal Samsung 500GB HDD, but i always get this error message:

Unable to initialize harddisk.
Error: Mount failed

did not change anything in the configuration. this hdd is working just fine with the original firmware for some 2 years now maybe...

what can be the problem here?

---

is this normal behaviour, or am i the only one with this problem?

someone...?

Quote:

---

Originally Posted by sattommy

Hello Everyone,

As I am currently having a lack of time to go on with the patching of dvbmediasink...I will have to postpone adding codecs and stuff for a bit.

I am however willing to share the code with someone if he is willing to continue the development.

Let me know if you are interested,

Regards,

Tommy

---

Hello sattomy,

If you share your code, I can try to free some time ;)

yesterday I have the same problem and I turn off my box and start again and it work perfect.

you have firmware rename to "patch"?

sorry my english

Quote:

---

Originally Posted by nervis

yesterday I have the same problem and I turn off my box and start again and it work perfect.

you have firmware rename to "patch"?

sorry my english

---

Not working.

Not pass of BOOTING.

Quote:

---

Originally Posted by MoRpHiUS_x

Not working.

Not pass of BOOTING.

---

install tftp32

Download backup_kernel file from the first post of this thread.

and connect on Your box by serial cable.

CTRL+C is to break boot and enter in Yamon

Commands are :

load -b tftp://local ip of pc where tftp is running/backup_kernel 0xb0100000

After load is finished copy paste lenght ( just hexadecimal size it should be 0x680000 )

pflash write -f 0x80000 0xb0100000 0x680000

Wait that he erase and write new kernel in flash.

After that turn off and update receiver with usb with original fw or e2.

Thanks MickeySa but I have no serial cable.

I see I should get one in order to revive the box.

@ MoRpHiUS_x

Do you have internal sata connected? If so try to disconnect it and reboot, if that also fail you need serial cable.

Quote:

---

Originally Posted by digihoe

@ MoRpHiUS_x

Do you have internal sata connected? If so try to disconnect it and reboot, if that also fail you need serial cable.

---

No mi AZBOX is model Elite.

Quote:

---

Originally Posted by arcibald

Hi ... to All

Another effective method to install the best emu and manage them from the OSD panel is provided by these plugins:


Once these are installed, you just have correct the path for the file CCcam.cfg:

SGC_menu:
From SGC panel installed the CCcam 2.14 and go to the correct path and the environment (-dC /etc/CCcam.cfg) in the startup script CCcam_2.1.4.sh:

/usr/bin/CCcam_2.1.4
/etc/CCcam.cfg
/usr/cams/CCcam_2.1.4.sh

Glasssutil:
This will install various emu in the path:

/usr/UCM_CamSrv_bin # including cccam (2.0.11) & cccam214.

The startup scripts will find them in /usr/UCM_CamSrv_script:

Cccam_Cam.sh
Cccam214_Cam.sh

Then enter here the path and the environment (-dC /etc/CCcam.cfg) and you're done.

################################# ################################# #############
Now you can manage your CCcam from panel with their emu_manager and having a complete list of additional features.
################################# ################################# #############

Thanks ... to development teams of these plugins

Regards

Arci

---

I am trying to use SGC, after i install CCcam from SGC panel here can i edit the settings?
i already have CCcam.cfg in /etc too.
What should i do now?
sorry

ok, i found it, i edited:

/usr/bin/$CAM &

to

/usr/bin/$CAM -dC /etc/CCcam.cfg &

guys what is the latest image for e2 and where I can dl it? Everything changed here I'm lost and confused.

https://www.satpimps.co.uk/showthread.php?t=139902
after update send
em8634dvb.ko
to /lib/modules/2.6.22.19-19-the_ripper/extra

Quote:

---

Originally Posted by hfmls

I am trying to use SGC, after i install CCcam from SGC panel here can i edit the settings?
i already have CCcam.cfg in /etc too.
What should i do now?
sorry

ok, i found it, i edited:

/usr/bin/$CAM &

to

/usr/bin/$CAM -dC /etc/CCcam.cfg &

---

or ... set & add new variable string ENV="-dC /etc/CCcam.cfg" ;)

Code:

---

#!/bin/sh
CAM="CCcam_2.1.4"
ENV="-dC /etc/CCcam.cfg"

... & add new variable string ...

cam_up () {
                /usr/bin/$CAM $ENV &

---

Regards

Arci

1 question:
how the hell did You send settings to the receiver?? I tried everything (dreamset, dreamboxedit) but nothing to do!!
"strange" thing is that if i access using webinterface i can see the settings channel list, but using remote control "blue button" through the receiver i got blank!! please help me, cos i'm going crazy!! :)

Quote:

---

Originally Posted by intranet

1 question:
how the hell did You send settings to the receiver?? I tried everything (dreamset, dreamboxedit) but nothing to do!!
"strange" thing is that if i access using webinterface i can see the settings channel list, but using remote control "blue button" through the receiver i got blank!! please help me, cos i'm going crazy!! :)

---

Change paths.
/etc/enigma2 for channels and bouquets.

works with DreamBoxEdit4.
Settings maker1.3 can also be used, but I have not fully tested.

I think we need a MAP for file paths to help everybody, becaue the file locations differ from Dream.

I use WinScp and the search function (find files ALT F7) is very usefull.....

go to system,customize, expert and activate option to see bouquets

Quote:

---

Originally Posted by intranet

1 question:
how the hell did You send settings to the receiver?? I tried everything (dreamset, dreamboxedit) but nothing to do!!
"strange" thing is that if i access using webinterface i can see the settings channel list, but using remote control "blue button" through the receiver i got blank!! please help me, cos i'm going crazy!! :)

---

Blue Button> Red button (all channels)
Blue Button> Green button (all channels divided by satellites)
Blue Button> Yellow button (all channels divided by provider)
Blue Button> Button Blue (channels on the favorite list, if present)

To view the channels in the favorite list, you must go to Menu> Setup> System> Customize ... and set YES "Enable multiple bouquets" ;)

http://www.youtube.com/watch?v=50TbT3BoLhY :)
guys watch this please:
https://www.satpimps.co.uk/showthread.php?t=141485
Project valerie running

Quote:

---

Originally Posted by hfmls

go to system,customize, expert and activate option to see bouquets

---

i missed that!! Thank you very much, my "bad". ;) :)

Quote:

---

Originally Posted by feedme

Change paths.
/etc/enigma2 for channels and bouquets.

works with DreamBoxEdit4.
Settings maker1.3 can also be used, but I have not fully tested.

I think we need a MAP for file paths to help everybody, becaue the file locations differ from Dream.

I use WinScp and the search function (find files ALT F7) is very usefull.....

---

example path on DreamBoxEdit > set to >Enigma2 settings

Options> Profiles:

Services and Bouquets files = /etc/enigma2/

User Bouquets files = /etc/enigma2/

Satellites.xml file = /etc/tuxbox/


Regards

Arci

I installed the new version e2 test. and wanted to return to Official Firmware and instead put 0.9.5020 0.9.4466 and I think I put blade crashed I can not connect anything to the box either with USB azup not take any write Booting and so remain
help

Quote:

---

Originally Posted by arcibald

or ... set & add new variable string ENV="-dC /etc/CCcam.cfg" ;)

Code:

---

#!/bin/sh
CAM="CCcam_2.1.4"
ENV="-dC /etc/CCcam.cfg"

... & add new variable string ...

cam_up () {
                /usr/bin/$CAM $ENV &

---

Regards

Arci

---

Why you use a command to force CCcam to read CCcam.cfg from /etc when CCCam read CCcam.cfg from /etc by default?
This is probably the third time I post on the subject and I keep reading this,am I missing something?

You using this

/usr/bin/$CAM -dC /etc/CCcam.cfg &

can be replaced by this:

CCcam &

will execute CCcam reading CCcam.cfg from /etc ,no need to set more options or paths.

ok, THANK YOU but it's also the third time i say cccam in my box always looks for CCcam.cfg in /var/etc, not /etc

Quote:

---

Originally Posted by romeox

I installed the new version e2 test. and wanted to return to Official Firmware and instead put 0.9.5020 0.9.4466 and I think I put blade crashed I can not connect anything to the box either with USB azup not take any write Booting and so remain
help

---

Have the same problem as me

hfmls /var/etc is in enigma 1,on enigma2 is etc.this is automatically redirected

when i run ./CCcam.mipsel , cccam runs but without any connections because in log it says "couldn't find /var/etc/CCcam.cfg"
now i'm confused..

where you have CCcam.cfg?

/etc
but that's ok, i use that script now, it works perfect.

A question for The_Ripper or MickeySa.

I can use the recovery method that descrive Recovery.rar file the first post?.

Ok,I understand now why you guys do this.
E2 normally have a simlink /var/etc /etc,but apparently,this image of E2 doesn;t come with that.
The best thing you guys can do is make those simlinks

have to make simlinks in root for
/hdd /media/hdd
/mnt /media
/share /usr/share

in /var simlinks to
etc /etc
keys /usr/keys
scce /usr/scce
tmp /tmp
tuxbox /etc/tuxbox

I assume some of this links are already made,but apparently some are missing.
You make the ones you need and is easy for beginners.
DCC can make the links for you by right clicking in the folder you want to make the simlink.

it simlinks are will erased when you reboot I think