I got it to scan properly only after I had updated it with dreamset.Quote:
Originally Posted by Smudger
Printable View
I got it to scan properly only after I had updated it with dreamset.Quote:
Originally Posted by Smudger
Carp95 you're the man!!! :PQuote:
Originally Posted by Carp95
now it works perfect.
Now all is need is for The_Ripper and team find out what is the problem with DVB-S2 with hd and sd mpg4 (diseqc too).
And tv part becomes perfectly "usable" :)
im getting the message "127.0.0.1:80 unable...webinterface'' i cant connect via telnet or ftp
i cant get cccam works.
I also have when reboot the same message than in the post before.
where is the how to install cccam working fine?
For bethe first time that i install this enigma2 is working very well as almost in dreambox. The ripper is the big chief.
yes, me too..i have that message now too :S
to fix go to setup and restart network !Quote:
Originally Posted by hfmls
I cannot get cccam to work and no matter what i do scan for channels or put in a channel list with dreamset or dreambox edit they sometimes work for 10min or so and stoppes working or stoppes working after reboot(starts working again if i put channel list again and reboot the fta channels start working again)
I am connected to Astra 28.2
finaly got cccam working here on 19.2 tested cccam 2.1.3 and 2.1.4 both working with canal digitaal.
there are still probs with astra 28.2. try 19.2Quote:
Originally Posted by andriorn
I would advice to use:
[ -x /usr/bin/CCcam_2.1.4 ] && [ -x /etc/init.d/CCcam_2.1.4_cam.sh ] && /etc/init.d/CCcam_2.1.4_cam.sh start
echo 66 > /proc/progress
with the startup in /etc/init.d/CCcam_2.1.4_cam.sh:
BTW: It is running from internal HDD here.Quote:
#!/bin/sh
################################# #######
# 6000->6099 = CCcam #
# 6100->6199 = CCcam-Capmtserver #
# 6200->6299 = CCcam-NewCS #
# 6300->6399 = CCcam-OSCam #
################################# #######
CAMD_ID=6093
CAMD_NAME="CCcam 2.1.4"
CAMD_BIN=CCcam_2.1.4
INFOFILE_A=ecm0.info
INFOFILE_B=ecm1.info
INFOFILE_C=ecm2.info
INFOFILE_D=ecm3.info
#Expert window
INFOFILE_LINES=1111111111000000
#Zapp after start
REZAPP=0
################################# #######
logger $0 $1
echo $0 $1
remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}
case "$1" in
start)
remove_tmp
/usr/bin/$CAMD_BIN &
;;
stop)
killall -9 $CAMD_BIN 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac
exit 0
4@@@@ if u want to go back to original firmware, what do u have to do?
HD SUISSE open , video o.k. no audio
The_Ripper i noticed too sometimes audio won't work, or it will work with some problems.
like 20%..30% of the times, but if i go back to other channel and to same again sound is ok.
I played with it, its working but still a lot of work have to be done. The best thing right is to give the coders time. So they can sort everything out. Its still bugy, but cccam is working and that was my biggest worry.
i followed this and is working :sifone: carp nice 1 dude:respect-054:Quote:
Originally Posted by Carp95
can i say wow yii haaaaaaaa
cccam 2.1.3 runnin on az as i type playhouse kidz tv on 28 is sweeeeeeeeeeet
thankyou to the team ,you guys rock:respect-054::respect-054:
@hfmls:
Before reboot
setxenv -f /dev/mtdblock0 -k y.start -v "xrpc 0xac080090; load zbf 0xb3000000; go"
setxenv -f /dev/mtdblock0 -k a.linux_cmd -v "console=ttyS0,115200 root=/dev/hda1 rw rootdelay=5 mem=108m"
To boot from HDD
setxenv -f /dev/mtdblock0 -k y.start -v "net init;net initpci;net up; load -b tftp://192.168.1.2/vme2.bin 0x90020000; go 0x90020000"
setxenv -f /dev/mtdblock0 -k a.linux_cmd -v "console=ttyS0,115200 root=/dev/hdb1 rw rootdelay=5 mem=108m"
The kernel must be on tftp server. But it will also work if you have two partitions on you internal HDD and the first will have the kernel - no filesystem on it just put the kernel with dd in it.
I haven't tested yet, but as soon as I find a spare 3.5" disk, I'll try it. I have important things on the actual one and don't want to 'destroy' it.
Audio on some channels is not working, as the_ripper turned ofo STC Timer which are responsible for synchronisation.
We will put this back after we reach more stabillity, and as we said, dont worry every bug will be sorted step by step.
This is not even BETA, this is still Alpha stage.
But still a great job so far:respect-040:Quote:
Originally Posted by MickeySa
@all don't mind the cosmetic things, let them clear hardware first
This is indeed great no brilliant work, its just a pity there's nothing for us plus owners to test yet...I am jealous I wanna do some testing too!!Quote:
Originally Posted by Carp95
CCcam and Mgcamd for Azbox with plugin start/stop/restart/cam info/autostart/desable autostart
Install
1.first enigma2-plugin-extensions-userscripts_2.4-r4_mipsel.ipk
2.enigma2-plugin-camd-mgcamd.1.35a_2.4-r1_mipsel.ipk
3.enigma2-plugin-camd-cccam.2.1.4_2.4-r0_mipsel.ipk
4.make folder /var/etc for your CCcam files and put your CCcam files
Restart box
5.Go to Main menu -Plugins-User Scripts-execute User Script from /usr/script
you can
start/stop/restart/cam info/autostart/desable autostart
For Mgcamd you have to put your config files to /var/keys
6.You have to change this in mg_cfg for AzBox
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
and you have to make all other changes in configs for Mgcamd 1.35a
I have to add Mgcamd working perfect on Azbox
I have followed this thread from day one and decided to try E2 for the first time today after the Ripper fixed CA :respect-055:
Just trying 28.2 east SD at the moment and zapping is spot on.CCcam 2.14 now autostarting with *.prio file and *.providers file showing in web interface :16001:respect-059:
I know there is still alot of work to be done but exellent work by the Ripper and his team.:cup-006:
Take note opensat :respect-013:
I'm missing somthng I can't get any channels to clear either sd FTA or scrambled on 28.
installed e2
download settings via dreamset
added new driver rebooted.
I've got CCcam running ok
I do have a vbox inline
Nothing Please help
Quote:
Originally Posted by Smudger
I uploaded channels to AZ with Dreamboxedit (not sure if that make any differance tho) :smash:
also noticed box won't go into standby I wonder if E2 is installed correctly.
Going back to Opensat :(
After I uploaded settings via dreamset, I had to run a satellite scan for it to work.Quote:
Originally Posted by Smudger
when running scan did you see channels being identified by scan? also do you set clear option when scanning?
Dear all members,
Found this trick on another forum, then tried it.... it succeeded!!! thanks to "gcool"
In fact, I installed new E2 successfully yesterday..... then I used FTP to replace tuner drivers like said before in this thread..... then started to do an automatic scan using DiseqC ABCD "mode" with Nilesat on Port A, Hotbird on Port B & finaly Arabsat on Port C (with nothing connected on Port D).....with Send DISEqC only set to "NO"..... then after almost 25 min. of scan there was almost 1100 TV channels (Not bad for all 3 sattelites, since only scan gives only DVB S channels.... no DVB S2 channels or Mpeg4).Quote:
Originally Posted by gcool;
Then like the trick said, set back Send DISEqC only to "YES"..... the error message "SID not found in PAT" disapeared.
By the way, I can move between sattelites without any problem
Hope it will help.:respect-055:
Yeah, channels were identified within the first 20 seconds of the scan. I did set the clear option. I was also messing around with the DiseqC in Tuner Configuration, setting it to yes and no like halabessa said.Quote:
Originally Posted by Smudger
well I'm getting 0 services found
Where do I copy the mipsel.ipk files before install?Quote:
Originally Posted by Matrix10
Is this the right command that I run in putty?
ipkg install ./enigma2-plugin-extensions-userscripts_2.4-r4_mipsel.ipk
Well this is the way to go:
tuner conf
- simple
- disecq set to single
Select the sat thats on port A or AA or input 1 on your disecq or the sat wich was set where the rotor is.
Disecq commands are not in yet guys so a scan will only bring up services wich are on port A/AA/1 or previous selected satelite on rotor
A scan on 19,2 east wich is on my port A brought me 1410 services
i can not get my internal HDD recognized!
i am first trying to initialize my internal Samsung 500GB HDD, but i always get this error message:
Unable to initialize harddisk.
Error: Mount failed
did not change anything in the configuration. this hdd is working just fine with the original firmware for some 2 years now maybe...
what can be the problem here?
I give up ill try again on next release. Cheers for everyones help.
Hi Smudger I had same problem on 19.2 E Nada tryed list ect.........so I disconected motor and it scaned after loading a list not sure if it was the motor or not or luck or bad conection??????? (Willing to try anything rather than offical FW lol:respect-055:)Quote:
Originally Posted by Smudger
Again thanks to Ripper and gang:bravo-009: :bowing-036:
Stavross
Quote:
Originally Posted by Matrix10
Danke OoZooN :cheers2:Code:Package: enigma2-plugin-extensions-userscripts
Version: 2.4-r4
Description: OoZooN's User Scripts Plugin for DM 7025 , DM 500 HD , DM 800 HD PVR and DM8000 HD PVR
Section: extra
Priority: optional
Maintainer: oozoon <tux@oozoon.de>
Is there any samba client software installed on this image so I can mount a link to my windows PC?
I tried using this command but I got this error:
mount -t smbfs -o username=roger,password=password //192.168.0.8/movies /mnt/movies
mount: mounting //192.168.0.8/movies on /mnt/movies failed: No such device
Enigma 2 two Skin
glacial
http://img683.imageshack.us/img683/6413/prevr.png
_http://www.mediafire.com/?s115td39dshqa8c
Nemesis
_http://www.mediafire.com/?4aama3w7hh6z3q2
install
Extract /usr/share/enigma2
Nemesis.Blueline folder
glacial folder
...
You keep using those long commands to start CCcam when it starts silly by typing CCcam& in telnet or by script
The CCcam.cfg file is read from /etc by default. You do not need to set a path for the cfg file, is redundant,useless.
(why my message from this morning disappeared pointing this out?)
btw why only a few channels receive epg? not that important at this moment, just curiosity.
You can use Software manager to install ipk filesQuote:
Where do I copy the mipsel.ipk files before install?
Is this the right command that I run in putty?
ipkg install ./enigma2-plugin-extensions-userscripts_2.4-r4_mipsel.ipk
first you have to copy ipk file to / (the root)
After that go into
SETUP menu -Software managment-Install local extension-Internal flash
and instal ipk file .After remove ipk file from / (the root)