Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

21-10-2010, 10:47 AM
colla

Read the last few pages of that thread and all your questions will be answered
21-10-2010, 11:14 AM
moicas3004

Quote:

Originally Posted by colla

Read the last few pages of that thread and all your questions will be answered

Again, what the hell. Im updated with this complete topic. The ripper as says that internal reader is not working, but i dont know if the kernel is able to detect the pheonix reader. It's a simple question, but once again no one knows and say to me to read. I have readed all posts in this topic, so stop replying that.

Just say : I dont know, No it dont work or yes it works. :banghead:
21-10-2010, 11:54 AM
NodiSa

SD and HD channels works scrambled.
scrambled channel works!!!
CA support Fully Fixed.

new driver em8634dvb.ko attached ...
It is necessary to unpack the new file and FTP to transfer the location
lib/modules/2.6.22.19-19-the_ripper/extra

Comfortable viewing of scrambled channels ...

Regards
21-10-2010, 12:04 PM
cicciotommaso

@NodiSa
readme please. thanks
21-10-2010, 12:13 PM
andriorn

Quote:

Originally Posted by NodiSa

SD and HD channels works scrambled.
scrambled channel works!!!
CA support Fully Fixed.

new driver em8634dvb.ko attached ...
It is necessary to unpack the new file and FTP to transfer the location
lib/modules/2.6.22.19-19-the_ripper/extra

Comfortable viewing of scrambled channels ...

Regards

Has anyone here tested? does it work?
21-10-2010, 12:26 PM
Smudger

novice question with this new driver can we use any mipsel client oscam cccam etc? or
am I miss understanding something with CA support fully fixed.

Thanks
21-10-2010, 12:27 PM
T33

Quote:

Originally Posted by andriorn

Has anyone here tested? does it work?

No, it doesn't work. Why do you think he posted it? My gaaaaawd!
21-10-2010, 12:31 PM
Carp95

Quote:

Originally Posted by Smudger

novice question with this new driver can we use any mipsel client oscam cccam etc? or
am I miss understanding something with CA support fully fixed.

Thanks

Yes you can but there isn't any internal cardreader support
21-10-2010, 12:31 PM
NodiSa

All work Dreambox cam:

Cccam, mgcamd, NewCS, Oscam, Scam, Gbox, Mbox and others if I forgot some ....

Code:

root@AZBox:/usr/bin# ./CCcam_2.1.4 -dC /etc/CCcam.cfg 13:24:07.285 CCcam: ====================================================================== 13:24:07.288 CCcam: starting CCcam 2.1.4 compiled on Jan 30 2010@16:28:03 13:24:07.288 CCcam: ====================================================================== 13:24:07.294 CCcam: online using nodeId bbe2790fb4d21d89 13:24:07.306 CCcam: dvb api3 detected 13:24:07.309 CCcam: DM7025 detected 13:24:07.309 CCcam: create 8 cam device(s) 13:24:07.624 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found 13:24:07.625 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found 13:24:07.626 CCcam: static cw not found or bad 13:24:07.627 CCcam: parsed 0 entries from /var/etc/CCcam.prio 13:24:07.628 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found 13:24:07.629 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found 13:24:07.631 CCcam: server started on port 12000 13:24:11.973 CCcam: cam[0] set PMT for sid=2774 13:24:11.974 CCcam: start EMM 13:24:12.078 CCcam: EMM demux 1 set 13:24:12.080 CCcam: EMM: start filter on nagra emmpid: 0x1003 caid: 0x1830 id: 0x0 13:24:12.082 CCcam: EMM: start filter on nagra emmpid: 0x1005 caid: 0x1843 id: 0x0
21-10-2010, 12:39 PM
MickeySa

Yes, all Dreambox camd's work :)
21-10-2010, 12:40 PM
antrabe

Im going to begin now to install enigma2 on my azbox I only have to follow first post, patch bin in usb and run..........
21-10-2010, 12:42 PM
hfmls

READ IT WELL AND GOOD!
also go to page 64
21-10-2010, 12:42 PM
leerock

Any test results?
How s the zapping speed on scrambled channels?

@Nodisa
Is your panel ready for release m8?

A big thanks to the team!!!!
21-10-2010, 12:43 PM
The_Ripper

@Smudger
CA fixed is ment that /dev/dvb/adapter0/ca0 path now works ,can be opened by CAMs/EMUs and send DCW and I can then send to Sigma API for decoding.
Internal smart reader still doesnt work, external reader can be attached over USB, but this point I didnt test.
21-10-2010, 12:47 PM
bluedawe

Can't wait to go home and test it! (sorry for OT, but this is euphoria what I'm feeling now!)
21-10-2010, 12:49 PM
antrabe

Quote:

Originally Posted by hfmls

here stopped like 40 seconds at 25% in VDF (just before boat image but went to 100% after i wait :)
btw MickeySA, you guys should correct readme, instalation method is.
patch.bin in fat32 usb pen, update boot menu, press update, then reboot, then open azup and press "update" with usb stick STILL in azbox hd, using IP that shows in VDF.
then after update goes to 100%, remove usb and reboot.
all should go well to 100% in VDF display.

Here all went good :)

azbox hd elite

i have to do this to install?
21-10-2010, 12:51 PM
leerock

Quote:

Originally Posted by antrabe

i have to do this to install?

Yes...
21-10-2010, 12:52 PM
MickeySa

@antrabe

First go back to official firmware by AzUP then flash Reciever with enigma2 patch.bin.

change em8634dvb.ko to get scrambled channels working with some Dreambox cam.
21-10-2010, 12:52 PM
hfmls

Quote:

Originally Posted by Smudger

novice question with this new driver can we use any mipsel client oscam cccam etc? or
am I miss understanding something with CA support fully fixed.

Thanks

yes. we can. :P :P

btw guys i can't open dvb-s2 8dsk :S
always says tune failed
21-10-2010, 12:59 PM
hfmls

i remember in kathrein to watch HD channels dvb-s2 and mpeg4 codec we had to activate
HighSR, is this the case?
21-10-2010, 01:13 PM
bawin

Any question the SmartGo + usb works with enigma 2?
21-10-2010, 01:28 PM
hfmls

guys do u managed to open HD channels in dvb-s2 8psk?
In kathrein i couldn't open till i activate High symbol rates, in azbox i can't open too.

The rest is just perfect!! I'm uploading a video showing how it works and zapping speed :)
21-10-2010, 01:32 PM
kanber_kav

Diseqc ? :(
21-10-2010, 01:33 PM
hfmls

no, without Diseqc. Simple.
also, scan in transponders that are dvb-s2 8psk can't find any channels either.HD or mpeg4
21-10-2010, 01:36 PM
andriorn

How does channel scan work for you guys?
When i scan and try to watch channels and when i have tried using dreambox channel list the channels work for about a minute and then stops and box becomes slow and none of the channels work anymore.....
I am trying to watch free channels on astra 2(28.2)
can anybody here upload working channel list for astra 2 on azbox?
21-10-2010, 01:39 PM
hfmls

channel scan works ok here, but can't find any HD channels or SD mpeg4.
i had to use dreamset channel list.
21-10-2010, 01:54 PM
kooleracer

could somebody be so kind to make a new patch with the latest updates in and with cccam pre-installed or a how to do for people like me.

thx, the ripper & co
21-10-2010, 01:57 PM
antrabe

yes will be very useful to join all info in one post
21-10-2010, 02:00 PM
eppie

¿ How about Premium+ ?
Can we test it with this receiver?
21-10-2010, 02:02 PM
hfmls

Quote:

Originally Posted by antrabe

yes will be very useful to join all info in one post

there's already a thread with that.
21-10-2010, 02:08 PM
antrabe

also with the new drivers to add etc ? where please?
21-10-2010, 02:11 PM
Juka

Quote:

Originally Posted by antrabe

also with the new drivers to add etc ? where please?

Check this thread:
https://www.satpimps.co.uk/showthread.php?t=139902
Updated frequently!

Regards
Juka
21-10-2010, 02:16 PM
hfmls

http://www.youtube.com/watch?v=KcJXkcrGUQY
no HD or mpeg4 channels :|
21-10-2010, 02:17 PM
antrabe

ok i will follow step by step until 11
21-10-2010, 02:25 PM
T0rca1950

Could someone please help me with this CCCam instalation.

This is the first time ever i use E2. I replaced the em8634dvb.ko file.
What do i have to do next to install Cccam on my azbox?
I have downloaded Cccam 2.1.4 from a forum. I guess i have to use Cccam.mipsel, but where to put it? Do i have to run a telnet command after i ftp it?

TY
21-10-2010, 02:41 PM
Carp95

Place mipsel in usr/bin ( Rename to CCcam )
place cfg in /etc

Login with telnet

Code:

cd /usr/bin

Code:

./CCcam -dC /etc/CCcam.cfg
21-10-2010, 02:44 PM
hfmls

put CCcam.mipsel (chmod 777) and CCcam.cfg (with your cline) in /usr/bin/
then go to /usr/bin and run via telnet this command:
./CCcam.mipsel -dC /usr/bin/CCcam.cfg

then go to ipazbox:16001 to checkout everything in browser.

btw, does anyone know how to make a script to auto start?

new video, better zapping, only valid channels.
cccam 2.1.4
server ping 50ms.

http://www.youtube.com/watch?v=odL0X7-f9eM
21-10-2010, 02:48 PM
Carp95

Quote:

Originally Posted by hfmls

btw, does anyone know how to make a script to auto start?

http://www.youtube.com/watch?v=odL0X7-f9eM

Hehe search for dccamd in (I guess bin) on Azbox
Rename Cccam.mipsel into dccamd

Replace original dccamd with renamed Cccam en chmod ( 755 is OK )

Put cfg in usr/etc

Reboot AZBOX
21-10-2010, 03:00 PM
hfmls

you're the man!!!! that worked perfect :) :)

edit: well..not it didn't :S it asks for /var/etc/CCcam.cfg but after i reboot that folder is deleted :S
21-10-2010, 03:13 PM
kanber_kav

Quote:

Originally Posted by hfmls

you're the man!!!! that worked perfect :) :)

edit: well..not it didn't :S it asks for /var/etc/CCcam.cfg but after i reboot that folder is deleted :S

friend
mkdir -p /usr/emu

and copy cccam and settings file

run
/usr/emu/CCcam.mipsel -C /usr/emu/CCcam.cfg -d

Show 40 post(s) from this thread on one page