now reboot your receiver. Hopefully fransat will now open, you can login into your oscam with 192.168.0.95:10002 to see what version your running. Hopefully its new enough to read the Fran
I can't go to 192.168.0.95:10002
How you find this code
Printable View
now reboot your receiver. Hopefully fransat will now open, you can login into your oscam with 192.168.0.95:10002 to see what version your running. Hopefully its new enough to read the Fran
I can't go to 192.168.0.95:10002
How you find this code
Good evening
Maybe it don't work because when I try to find the satellite and channel I change a lot of settings on the box , also I reset the box at factory setting
Maybe I can try to use one of my 2 other vu+ box and now I know what to do, it will be better. I can use also edidpate for do all the setting
What do you thing guys
I am worry I did some mistake on this box and it s for that the box don't work well
Regards
Your latest image shows Common Interface, yet you're not using a CAM, try selecting Oscam and check that your card is the right way up, some readers have the chip facing upwards, some downward, try inserting it then press the Blue button and check if it's recognized.
you can only log into the ocam interface if you have the cam running, as Mickha has pointed out you have your cam set to common interface, change it to oscamQuote:
Originally Posted by Nozahic
Hi guys
No success at the moment and I can't go see witch oscam I have
I was thinking because my 3 box was done by a professional who settled everything for we can have multiple rooms Sky UK in our villa in Spain, maybe is for that my settle don't work.
Like you can see I am not so cleaver with that and maybe my box need to be reboot from start but I don't know how to do that and maybe it will be don't complicate for me.
I live near Bristol, do you know a company who can do all this job for me, I can go or post my box or maybe where I need to look in yellow page
Thank for your help to both of you.
3tv , witch car you used, the série 4 or the new one série 6
Regards
using pc6 here
what error do you get when trying to log in with:
192.168.1.65:10002
Good morning
I try today and this time, something open when I tape 192.168.1.65:10002. I don't know why it open now, I try few time yesterday
Maybe because I turn on and off the box and left the box connect to internet. A update has been done
Below pic of what I have
Regards
I try me both card my old pc4 and also pc6
your oscam looks very old. Install a new version. rename the current oscam binary then save a more recent version in the same directory. look in usr/bin.
make sure your reader device is set to read from the correct card slot as well
Dear 3TV
That look complex to do, I can you explain more how to do that because I don't want to do mistake. Witch oscam I need ? It will be nice to know what to do step by step
Regards
I change the name of all the file oscam, by xxxxx binary. What I need to do with this file now ?
Where I find a new oscam, do you have a reference for that ? I need to put the new file oscam here also ?
Regards
leave those file names alone, its the oscam bin file you need to update.Quote:
Originally Posted by Nozahic
there should be a version for you vu receiver on this site.
Dear 3TVQuote:
Originally Posted by 3tv
Ok first thing done, change name
Where I need to look for Oscam bin file , how I do that ?
I need to look what on this website?
Regards
I posted how to load a new Oscam in post 4, of this thread, and where to find them.
Thank you Mickha, I will look at that and let you know if any problemQuote:
Originally Posted by Mickha
Regards
You might want to back up some files, on your PC, as loading a new Oscam will overwrite the old ones, and if running a line make sure you have that information saved.
What file I need to backup on my computer
Regards
Just back up your card information, or you'll have to type it again, and your CCcam.cfg file. if you're using a line, to open other channels.
It all depends on what you're using.
I put a new oscam, but still nothing
You can see on the pic below, what I did
Regards
looks like you have put the ipk file in the bin folder you haven't installed it
ftp into your usr/bin folder locate the file named oscam, rename it to oscam.bak
open the zip file from here - https://www.satpimps.co.uk/showthrea...l=1#post961436
it contains a oscam file, ftp the oscam file (not the zip file)put it in your usr/bin folder. change file permissions to 755 save and exit. reboot your reciever
Quote:
Originally Posted by 3tv
I have to oscam in usr/bin. Oscam or oscam-emu. Witch one I need to change the name to xxxx.bak
Pic in next answer because I have another question ?
Witch one I need to download? Also you say ftp the oscam file, what you means ? And I need to put this file in urs/bin using FileZilla? Where I need to go for change file permissions?
Sorry again but I am sound maybe stupid, but like say few time, I don't have a clue what I am doing
Regards
google, I cant baby you through every single step.Quote:
Originally Posted by Nozahic
Sorry but like I say I was bad with that. I know what it is ftp now, it s to transfer the file from computer to box fileQuote:
Originally Posted by 3tv
But I still need you help for know witch Oscam I need to change the name because like you can see I have 2 of them where you ask me to change the name
Also and the link you pass me to download Oscam, you have few of them, I just ask witch one I need to do because I don't want to do a mistake
Regards
Also I understand it is not easy for you guys to explain to me because I am bad but I been honest since the start I always say I was bad, and it s for that I ask if you maybe knew people who can do it because I am ready to pay for have that done. Hope you understand and you are not so cross about me
To manually install an Oscam.ipk file you transfer it to the tmp folder, not the bin folder.
Did you read post #4, in this thread?
"On the left hand side you should see your PC's files, on the right your VU+ files.
Just navigate to the Oscam.ipk file, you have just downloaded, and drag, and drop them, into the tmp folder, on the lower right.
Once done go to your receiver, press the green button, followed by the yellow button, on your remote, and select the Manually install ipk files.
Select the Oscam file and press OK.
Wait for the receiver to finish loading it, and probably re-boot, then press your Blue Button, followed by the < > arrow button, and select Oscam."
the oscam I linked to (post 22) contains only the oscam binary file so can be dropped into the usr/bin folder. it wont replace any other filesQuote:
Originally Posted by Mickha
Dear mickha
Yes I read few time your link in post 4 but not always easy to understand and they give you 4 different Oscam to update . Not sure witch one to choice
Dear 3TV
I find I manage to do what you ask me , pic below and I change the setting permission to755 like you say
I drag the file from my computer to remote site and my right user/bin
After that what I need to do
Regards
Dear Mickha
I try to do what you say to me and I understand from your link page 1 , but I have that in results and I don't think that is good
Sorry but it look like I am so stupid with this staff.
If both of you don't want to reply anymore I will understand and I will bin this box because I am so bad with that. Other way I will try again and again because I don't like to give up and I hope I will manage soon with all your help
Good evening
That's CCcam230, not Oscam.
You aren't stupid, just learning, we've all been there.
Can you please post which Oscam file you are dragging into your tmp folder.
3tv's link isn't a .ipk file, and can't be loaded automatically.
As 3tv has a Fransat card, that's working on his VU+ receiver, follow his instructions, of placing his file in the user folder, bin sub folder, using Filezilla.
Just drag the Oscam file, from your PC, and drop it in the bin sub folder.
Hopefully 3tv can get your card working.
Does the VU+ Duo card reader have the chip facing downwards, or upwards?
Thank Mickha for your kind word but it is not easy to learn, but I suppose it s like a lot of new thing. But I don't give up like that.
I will look the again the file of 3TV and move his file. But I was not sure witch one to move because and the link I can see 2 files but I will look again tomorrow and try my best and let you know
Have a good evening
Regards
the file I pointed to in post 22 in the oscam thread contains a zip file with 1 file inside named oscam. no idea what file your using.
Ok Guys
I download on my computer the file name Oscam 11357 + .............
This was on the left side of my FileZilla, I pass this file on my right way to \usr/bin and I change the file permission to 755.
Hope that is good , what I need to do after
Regards
You seem to have downladed the wrong one, 3tv said post #22, not #23.
A .tgz file is strictly for Blackhole, you install it like a .ipk file except you select Manually Install blackhole, not Manually install ipk.
Hope this time is good, I open the good file ref of 3tv number 22, I unzip and safe the file on my do***ents on computer ( left ) and after that I move the file oscam to usr/bin and change the code to 755
What I need now
Cheers
reboot your reciever and log into oscam via the oscam interface you should now be running the upto date version
Hi all
I reboot my box by turning off by the button at the back
After that nothing special, still have few channel like Vosges, Mont Blanc but not the fransat channel
I try to log to my computer, I try 2 computer but I can't open nothing
Pic below
Also you can see on the pic, as am has been change on the box because I been to Oscam conf file and as am server file and all the thing 3TV ask me to change , change again. I need to change again that ?
And maybe my code 192. Ect. Change also
Regards
In your attached picture you have 192.168.1.95:10002, yet in a previous post you posted:
"now reboot your receiver. Hopefully fransat will now open, you can login into your oscam with 192.168.0.95:10002 to see what version your running. Hopefully its new enough to read the Fran
I can't go to 192.168.0.95:10002
How you find this code"
I try all the code with at the end 1001 or 1002 or 8888 but nothing open like last time
195.168.1.65. 195.168.0.95
I am lost but like show on my previous pic a lot of thing change on my Oscam file