i think you must wait for RC4 for that.Quote:
Originally Posted by dutchmatrix
Printable View
i think you must wait for RC4 for that.Quote:
Originally Posted by dutchmatrix
Can't delete letters when creating fav list.
Are CI Modules supported in E2?
this is my newcs log. I'am trying to run total tv card in smargo with newcs and mbox but no luck. below is my newcs config. I realy need some help to get it work
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:56:53
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 16777215 type 255
[ 19:50:59 ] [ Box detect ] Box type 15 (Azbox)
[ 19:50:59 ] [ Config ] Option <blockc0> for device 0 (smargo) not present, defaulting to NO
[ 19:50:59 ] [ Config ] Option <crypto-special> for device 0 (smargo) not present, defaulting to NO
[ 19:50:59 ] [ Config ] Option <Seca-PPV> for device 0 (smargo) not present, defaulting to NO
[ 19:50:59 ] [ Config ] Option <sid> for device 0 (smargo) not present, no static sids added to filter
[ 19:50:59 ] [ Config ] Option <protectedsid> for device 0 (smargo) not present, no PIN Code will be sent
[ 19:50:59 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 19:50:59 ] [ Newcamd ] Server name : local
[ 19:50:59 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 19:50:59 ] [ Config ] Option <au> not present for User: dummy, defaulting to OFF
[ 19:50:59 ] [ Config ] Option <readers> not present for User: dummy, NO reader control enabled
[ 19:50:59 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host 127.0.0.1, Port: 12000, Au: Off, Spider allowed: No, Sidoverride: No, level: 0
[ 19:50:59 ] [ EMM Cache ] Initialising dynamic Cache
[ 19:50:59 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1948
[ 19:50:59 ] Calibrating delay loops
[ 19:50:59 ] usleep(5) takes: 0 s 50 us
[ 19:50:59 ] usleep(10) takes: 0 s 19 us
[ 19:50:59 ] usleep(100) takes: 0 s 109 us
[ 19:50:59 ] usleep(500) takes: 0 s 714 us
[ 19:50:59 ] Allocation memory for 200 regular users
[ 19:50:59 ] [ Loader ] Starting Telnet on port 1001
[ 19:50:59 ] [ SockSrv ] Server thread started
[ 19:50:59 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 19:50:59 ] bind: error! 125: Address already in use
[ 19:50:59 ] [ SockSrv ] Could not Bind to port 1001 EXITING!
[ 19:50:59 ] [ SockSrv ] Stopping port 1001
[ 19:50:59 ] [ ******* ] Reseting reader parameters
[ 19:50:59 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 19:50:59 ] [ Phoenix ] Setting Parity to: ODD
[ 19:50:59 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 19:50:59 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:51:00 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 19:51:02 ] [ Serial ] Read on fd 3 (len=22 timeout=5300ms)
[ 19:51:02 ] Phoenix_read:
0000: 03 00 d7 5b 3f f7 fe 33 f2 f7 69 00 ad f5 f1 ff ...[?..3..i.....
0010: ff a5 3d 7f ff ff ..=...
[ 19:51:02 ] [ ******* ] Atr header is 3F FF [INVERSE]
[ 19:51:02 ] [ ATR ] Data:
0000: 3f ff 14 25 03 10 80 33 b0 10 69 ff 4a 50 70 00 ?..%...3..i.JPp.
0010: 00 5a 43 01 00 00 00 00 00 00 00 .ZC........
[ 19:51:02 ] [ ATR ] T=0 1etu=13.02us Guardtime:15etu WWT:76800etu
[ 19:51:02 ] [ ATR ] Historical bytes: 3 [B0] [10] i [FF] J P p [00] [00] Z C [01] [00] [00]
[ 19:51:02 ] [ Loader ] Init NDS card
[ 19:51:02 ] Card reader locked for reader smargo [/dev/ttyUSB0]
[ 19:51:02 ] [ Phoenix ] Setting Parity to: ODD
[ 19:51:02 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 19:51:02 ] [ Phoenix ] Setting Baud to custom 76800
[ 19:51:02 ] [ NDS ] Sending to Card: D074018001
[ 19:51:02 ] Phoenix_write_byte:
0000: d0 74 01 80 01 .t...
[ 19:51:02 ] [ Serial ] Write byte on fd 3 (len=5, delay=196us)
[ 19:51:02 ] [ Serial ] Read on fd 3 (len=5 timeout=1400ms)
[ 19:51:02 ] [ Phoenix ] Echo mismatch - but lest continue
[ 19:51:02 ] [ Serial ] Read on fd 3 (len=1 timeout=2300ms)
[ 19:51:02 ] Phoenix_read:
0000: 01 .
[ 19:51:02 ] [ Serial ] Read on fd 3 (len=1 timeout=2300ms)
[ 19:51:02 ] Phoenix_read:
0000: 00 .
[ 19:51:02 ] [ Serial ] Read on fd 3 (len=2 timeout=2300ms)
[ 19:51:05 ] [ Serial ] Read timeout (1 of 2)
[ 19:51:05 ] Phoenix_read:
0000: 00 .
[ 19:51:05 ] READ Failed - 5
[ 19:51:05 ] [ NDS ] Could not get P3
[ 19:51:05 ] [ NDS ] i/o error ?
[ 19:51:05 ] Card reader unlocked for reader smargo [/dev/ttyUSB0]
[ 19:51:05 ] [ Loader ] Card 0900 on port /dev/ttyUSB0 failed
[ 19:51:05 ] [ Card queue /dev/ttyUSB0 ] Starting...
[ 19:51:05 ] [ Loader ] Starting Newcamd Server on port 12000
[ 19:51:05 ] [ NewCS ] Ready to GO! :)
root@AZBox:~# [ 19:51:05 ] [ Newcamd ] Newcamd thread Server started on port 12000
[ 19:51:05 ] bind: error! 125: Address already in use
[ 19:51:05 ] [ Newcamd ] Stopping port 12000
[ 19:51:05 ] [ Loader ] Reinit card with caid 0900
[ 19:51:05 ] [ ******* ] Reseting reader parameters
[ 19:51:05 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 19:51:05 ] [ ******* ] Reseting reader parameters
[ 19:51:05 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 19:51:05 ] [ Phoenix ] Setting Parity to: ODD
[ 19:51:05 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 19:51:05 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:51:06 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 19:51:07 ] [ Serial ] Read on fd 3 (len=22 timeout=5300ms)
[ 19:51:07 ] Phoenix_read:
0000: 03 00 d7 5b 3f f7 fe 33 f2 f7 69 00 ad f5 f1 ff ...[?..3..i.....
0010: ff a5 3d 7f ff ff ..=...
[ 19:51:07 ] [ ******* ] Atr header is 3F FF [INVERSE]
[ 19:51:07 ] [ ATR ] Data:
0000: 3f ff 14 25 03 10 80 33 b0 10 69 ff 4a 50 70 00 ?..%...3..i.JPp.
0010: 00 5a 43 01 00 00 00 00 00 00 00 .ZC........
[ 19:51:07 ] [ ATR ] T=0 1etu=13.02us Guardtime:15etu WWT:76800etu
[ 19:51:07 ] [ ATR ] Historical bytes: 3 [B0] [10] i [FF] J P p [00] [00] Z C [01] [00] [00]
[ 19:51:07 ] [ Loader ] Init NDS card
[ 19:51:07 ] Card reader locked for reader smargo [/dev/ttyUSB0]
[ 19:51:07 ] [ Phoenix ] Setting Parity to: ODD
[ 19:51:07 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 19:51:07 ] [ Phoenix ] Setting Baud to custom 76800
[ 19:51:07 ] [ NDS ] Sending to Card: D074018001
[ 19:51:07 ] Phoenix_write_byte:
0000: d0 74 01 80 01 .t...
[ 19:51:07 ] [ Serial ] Write byte on fd 3 (len=5, delay=196us)
[ 19:51:07 ] [ Serial ] Read on fd 3 (len=5 timeout=1400ms)
[ 19:51:07 ] [ Serial ] Read on fd 3 (len=1 timeout=2300ms)
i've much problem with mkv with high frame rate for example fast&furios 4, avatar, and so on. The problem is ethernet velocity. With original firmware i see this mkv with priority manager. In RC4 there is same improvement of mediaplayer
My first installation on azbox premium+:
* installation with jazup OK
* w_zard OK
* zapping channel very fast
* some HD channel are slattering (MTVNHD on hotbird)
TIPS for P+ users:
Add "echo 0 > /proc/fan" to init script to disable fan.
I also tested internal reader and it works for me with the newest oscam and conax card, but card initialization only works went oscam is starting. When I remove and insert card it cannot be inited properly.
Also check that newcs + phoenix and oscam + phoenix works. Newcs doesn't work with internal reader.
To connect phoenix I used pl2303 usb adapter.
I have problem with start enigma from usb. Dmesg log showed:
but after restart (command "restart -f") from rescue mode everything work fine.Code:usb 1-2: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:02.2: fatal error
ehci_hcd 0000:00:02.2: HC died; cleaning up
hub 1-0:1.0: cannot reset port 2 (err = -19)
hub 1-0:1.0: cannot disable port 2 (err = -19)
hub 1-0:1.0: cannot reset port 2 (err = -19)
hub 1-0:1.0: cannot disable port 2 (err = -19)
hub 1-0:1.0: cannot reset port 2 (err = -19)
hub 1-0:1.0: cannot disable port 2 (err = -19)
hub 1-0:1.0: cannot reset port 2 (err = -19)
hub 1-0:1.0: cannot disable port 2 (err = -19)
hub 1-0:1.0: cannot disable port 2 (err = -19)
Great work RTi Team :respect-040:
even the RTI team didn't announced that they have fixed the internal cardreader, but you are telling us your cardreader is working? SURE :D
the only thing you can get with your internal cardreader and oscam is this:
2011/01/23 13:57:01 2AAC8B70 s waiting for local card init
2011/01/23 13:57:01 2C4FD4B0 r ERROR opening device /dev/sci0
2011/01/23 13:57:01 2C4FD4B0 r Cannot open device: /dev/sci0
i also have phoenix cardreader connected to my azbox and this is working with the oscam, but internal cardreader NO!
Change /dev/sci0 to /dev/sc0. I can paste a log if you don't believe.Quote:
Originally Posted by moding
My card configuraiton in oscam.server:
Code:[reader]
label = azbox-reader
enable = 1
protocol = internal
device = /dev/sc0
fallback = 1
detect = CD
group = 1
emmcache = 1,3,2
lb_weight = 100
seems that you are lucky, to have your conax card running with it, because i am getting this with my german HD+ nagra card:
2011/01/23 15:26:26 2AAC8410 s waiting for local card init
2011/01/23 15:26:26 2BEFF4B0 r reader thread started (thread=2BEFF4B0, label=hdplus, device=/dev/sc0, detect=cd, mhz=368, cardmhz=357)
2011/01/23 15:26:26 2BEFF4B0 r hdplus card detected
2011/01/23 15:26:28 2BEFF4B0 r ERROR in IO_Serial_Read errno=0
2011/01/23 15:26:28 2BEFF4B0 r ATR is malformed, it reports 15 historical bytes but there are only 12
2011/01/23 15:26:28 2BEFF4B0 r ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2011/01/23 15:26:28 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:28 2BEFF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/01/23 15:26:28 2BEFF4B0 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=5
2011/01/23 15:26:28 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:29 2BEFF4B0 r detect native nagra card
2011/01/23 15:26:29 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:29 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:29 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:29 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:29 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:29 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:29 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:29 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:30 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:30 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:30 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:30 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:30 2BEFF4B0 r card system not supported
2011/01/23 15:26:30 2BEFF4B0 r Normal mode failed, reverting to Deprecated Mode
2011/01/23 15:26:31 2BEFF4B0 r ERROR in IO_Serial_Read errno=5
2011/01/23 15:26:31 2BEFF4B0 r Error activating card.
like i said, with my phoenix and adjusted oscam config for the phoenix, the card is running normally...
Sorry for my English.
There are problems with the playback only HD channels on 36E and 9E.
Especially evident in the sports channels. The problem lies in the periodic slowing pictures. How to use frame in fast motion scenes. Particularly noticeable in tennis. The ball does not fly, and Strobe Lights.
any news on record play back directed from azbox
internal cardreader work with osc@m and my via4
this is the config
and this is a little part of my logQuote:
[reader]
enable = 1
Label = freex
protocol = internal
device = /dev/sc0
EMMCache = 1,1,2
Group = 1
CAID = 0500
ident = 0500:041700
Quote:
**** OSCam << cardserver started version 1.00-unstable_svn, build #4551 (mipsel-azbox-libusb-pcsc-webif)
2011/01/24 0:47:02 2AACA5D0 s version=1.00-unstable_svn, build #4551, system=mipsel-azbox-libusb
2011/01/24 0:47:02 2AACA5D0 s client max. idle=120 sec, debug level=0
2011/01/24 0:47:02 2AACA5D0 s max. logsize=unlimited
2011/01/24 0:47:02 2AACA5D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/01/24 0:47:02 2AACA5D0 s auth size=4976
2011/01/24 0:47:02 2AACA5D0 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2)
2011/01/24 0:47:02 2AACA5D0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2011/01/24 0:47:02 2AACA5D0 s signal handling initialized (type=sysv)
2011/01/24 0:47:02 2AACA5D0 s newcamd: initialized (fd=9, port=12000, crypted)
2011/01/24 0:47:02 2AACA5D0 s CAID: 0500
2011/01/24 0:47:02 2AACA5D0 s provid #0: 041700
2011/01/24 0:47:02 2AACA5D0 s http thread started
2011/01/24 0:47:02 2AACA5D0 s creating thread for device /dev/sc0
2011/01/24 0:47:02 2D0674A0 r reader thread started (thread=2D0674A0, label=freex, device=/dev/sc0, detect=cd, mhz=357, cardmhz=357)
2011/01/24 0:47:02 2AACA5D0 s waiting for local card init
2011/01/24 0:47:02 2D0674A0 r freex card detected
What a hell ??
Internal cardreader is already working for some cards?? Thanks for reporting it @linch and @pawel5870!
That is a newest version of OScam for Azbox?
@moding, maybe you're using a diferent version of Oscam or Nagra cards arent working correctly atm.
@linch and/or @pawel5870, can you tell us if ecm times with internal cardreader are better then with original firmware? I remember with original fw times with some cards are bad in compare with other systems (dreambox, phoenix, etc...)
Also, anybody knows if CAS Interface works as card reader (since its a phoenix) with Azbox E2?
Thank you :king-042:
i would like to know ecm times too.
at the moment for me better performance are with oscam and usb reader omnikey late with a smargo in native oscam mode and final with internal cardreader. for my via4
omnikey--------->190-200ms
smargo native--->215-220ms
internal reader--->400ms
oscam binary are the same for mipsel-dreambox
When you're in this situation, by "ps" command look for a process line like this:Quote:
Originally Posted by The Doc
If you find it, try to kill this process then change channel... maybe you get audio and video...Code:1826 root 1596 S /usr/bin/showiframe /boot/backdrop.mvi
Let me know, I'm studing a similar situation.
SNL
Hi friends,
anyone know if it decodes or will decoder in futures versions, dts? I have an amp without any type of audio decoder.
thanks!
Actually the box downmix ac3/DTS to stereo.Quote:
Originally Posted by kevinch9
The_Ripper said to me in official forum the team is workin on a plugin to send raw audio to external amplifier so ac3/dts could be processed as multichannel audio.
I don't think the dts decoding will be done in the box (but i could be wrong...)
Bye,
So, as far as I understood, you are saying internal azbox reader have the same time as internal dreambox, right? So, if it is, thats all ok I think! :)Quote:
Originally Posted by linch
Btw... anybody knows if is possible to get CAS Interface working with Azbox in phoenix mode?? I dont know if that is possible with dreambox either...
Regards
Does recording HD channels work for you?
Tried to record hd but box hangs after 30 sec or so.
sd seem to work thought.
Nobody to answer ... it interests me too:o16:Quote:
Originally Posted by xanadu
I just tried with your config files and I get this:Quote:
Originally Posted by pawel5870
ERROR opening device /dev/sc0
This is Conax card, on RTi RC5 and using oscam-1.00-trunk-svn4682-mips
Do I need to install any additional drivers for using the internal cardreader?