Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

13-07-2010, 05:00 PM
The_Ripper

@all
For all people who got stuck just in BOOTING in vfd display, box isnt dead, but to back in original state there is 2 more posible ways:
1. Is serial cable and hardware interface to hook up to receiver board, user "telesat" put schematic diagram here on forum, just search it ...
2. Is to remove DOM from receiver/board and hook it up to external IDE rack. "telesat" is writing right now some tutorial because power connection isnt the same, so it will need some explanation what to do about that, plus he will upload what to put in DOM and with what partition app. So pls stay tuned .

If this 2 posibility is hard for someone, then unfortunately there is no other way, I can just apologize to everyone and to ashure that their receiver isnt damaged in terms of hardware.

---------
I added now in new kernel build initramfs root filesystem, so if needed rescue shell it will enable ftp/telnet and show you your IP address from dhcp app on VFD so backup original FW will not be the problem any more.
13-07-2010, 05:06 PM
wullieb25

first of all a big thanks to the ripper and all the team who are working on this and bringing new life to the azbox. respect to you guys.

i installed the image and its great but i have no network access to the box to put the origional firmware back on. i have tried everything but i cant connect or even see the box over my network.

at the moment i cant do anything with it.

any help from anyone on this matter would be very much apprichiated

thanks in advance
13-07-2010, 05:30 PM
sattommy

Quote:

Originally Posted by The_Ripper

@all
For all people who got stuck just in BOOTING in vfd display, box isnt dead, but to back in original state there is 2 more posible ways:
1. Is serial cable and hardware interface to hook up to receiver board, user "telesat" put schematic diagram here on forum, just search it ...
2. Is to remove DOM from receiver/board and hook it up to external IDE rack. "telesat" is writing right now some tutorial because power connection isnt the same, so it will need some explanation what to do about that, plus he will upload what to put in DOM and with what partition app. So pls stay tuned .

If this 2 posibility is hard for someone, then unfortunately there is no other way, I can just apologize to everyone and to ashure that their receiver isnt damaged in terms of hardware.

---------
I added now in new kernel build initramfs root filesystem, so if needed rescue shell it will enable ftp/telnet and show you your IP address from dhcp app on VFD so backup original FW will not be the problem any more.

Hello The_Ripper,

Could you maybe provide us with some steps howto compile mrua with gcc 4.3, so the compiled executables will run on your kernel? This way somepeople could work on media stuff.
13-07-2010, 05:36 PM
hfmls

Quote:

Originally Posted by The_Ripper

@all
For all people who got stuck just in BOOTING in vfd display, box isnt dead, but to back in original state there is 2 more posible ways:
1. Is serial cable and hardware interface to hook up to receiver board, user "telesat" put schematic diagram here on forum, just search it ...
2. Is to remove DOM from receiver/board and hook it up to external IDE rack. "telesat" is writing right now some tutorial because power connection isnt the same, so it will need some explanation what to do about that, plus he will upload what to put in DOM and with what partition app. So pls stay tuned .

If this 2 posibility is hard for someone, then unfortunately there is no other way, I can just apologize to everyone and to ashure that their receiver isnt damaged in terms of hardware.

---------
I added now in new kernel build initramfs root filesystem, so if needed rescue shell it will enable ftp/telnet and show you your IP address from dhcp app on VFD so backup original FW will not be the problem any more.

thank you very much for the backup thing :)
when will u release it?
i got a question mower, what's your next step, or what do u expect from users/coders before u release sourcecode/svn ?

thank you so much again.
13-07-2010, 05:42 PM
single

Hi again

TO Coders:

To try to made drives can some of the coders compile I2CTools to see what kind of chips/ic's we have on this kernel?

You can find ic2 tools here:w3w.lm-sensors.org/wiki/I2CTools

With this tool we can have some info to see if is possible work on kernel drives.

CU

@sattommy

Did you try media programs compile on this kernel, like the one you have on NAS "boxes"?

CU

@The_Ripper
"
I added now in new kernel build initramfs root filesystem, so if needed rescue shell it will enable ftp/telnet and show you your IP address from dhcp app on VFD so backup original FW will not be the problem any more."

On Busybox?
13-07-2010, 05:46 PM
single

Quote:

Originally Posted by MickeySa

Kernel used in this release of E2 ( 2.6.22-19 patched by Sigma ) :

Code:

http://support.wdc.com/product/download.asp?groupid=1003&sid=120&lang=en

Here is make file for OE od DM 800 , 2 small diff files for sources which have to be changed ( for FB , and for priority of process for Kernel 2.6.22-19 ) and .config file for Kernel 2.6.22-19 .

Makefile-opendreambox-1.5 ( for whole image , crosscompiler, and all lib's etc. )

All files provided by the_ripper, thanks goes to him.

What version of GPL Code?

EDIT:
Back to do one more question...

Because of kernel can't see usb stick's....

If usb modules are incompatibility with kernel, then they can't be loaded, then if you compile new usb-storage ...bla bla for this kernel how usb drive can be compatibility with this new kernel?....

Modules can be linked with kernel (M) or can not, what is the best choise?...

WDTV_Live_GPL_code_package_1.0?.? ?.zip
13-07-2010, 06:04 PM
tonybam

Quote:

Originally Posted by The_Ripper

@all
For all people who got stuck just in BOOTING in vfd display, box isnt dead, but to back in original state there is 2 more posible ways:
1. Is serial cable and hardware interface to hook up to receiver board, user "telesat" put schematic diagram here on forum, just search it ...
2. Is to remove DOM from receiver/board and hook it up to external IDE rack. "telesat" is writing right now some tutorial because power connection isnt the same, so it will need some explanation what to do about that, plus he will upload what to put in DOM and with what partition app. So pls stay tuned .

If this 2 posibility is hard for someone, then unfortunately there is no other way, I can just apologize to everyone and to ashure that their receiver isnt damaged in terms of hardware.

---------
I added now in new kernel build initramfs root filesystem, so if needed rescue shell it will enable ftp/telnet and show you your IP address from dhcp app on VFD so backup original FW will not be the problem any more.

Salam
Thanks for your extreme effort to help those who stuck in booting station
is this the schem of serial interface if that what is file we would sent and how?

https://www.satpimps.co.uk/showthrea...389#post728389
13-07-2010, 06:06 PM
The_Ripper

@single
Yes it works over busybox ...

@sattommy
I use mrua_SMP8634_2.8.5.1-celrun-08062009-2.6.15K_facsprod_legacy_dev.mips, this MRUA packet, but now for compilation part , you will need gcc over glibc and to add this switches
L=/MMP/tmp -> for example
gcc ********** -Wl,--dynamic-linker,$L/ld-uClibc.so.0 -Wl,-rpath-link,$L/
With this you will tell what LD library to use and on start where to search for libs
So all MRUA uClibc libs/main uCLibc libs must be in that paths.

This is how should look after for example you open binary in IdaPro

Code:

.init:00401208 # Format : ELF (Executable) .init:00401208 # Imagebase : 400000 .init:00401208 # Interpreter '/MMP/tmp/ld-uClibc-0.9.27.so' .init:00401208 # Needed Library 'librmcw.so' .init:00401208 # Needed Library 'librmcore.so' .init:00401208 # Needed Library 'libruahdmi.so' .init:00401208 # Needed Library 'librua.so' .init:00401208 # Needed Library 'libllad.so' .init:00401208 # Needed Library 'librmhdmi.so' .init:00401208 # Needed Library 'librmedid.so' .init:00401208 # Needed Library 'librmi2c.so' .init:00401208 # Needed Library 'libruai2c.so' .init:00401208 # Needed Library 'librmsha1.so' .init:00401208 # Needed Library 'librmcec.so' .init:00401208 # Needed Library 'libstdc++.so.6' .init:00401208 # Needed Library 'libm.so.0' .init:00401208 # Needed Library 'libgcc_s.so.1' .init:00401208 # Needed Library 'libc.so.0' .init:00401208 # Library Search Path '/MMP/tmp'

EDIT: Not gcc over glibc, it's gcc over uClibc, sorry for confuse ...
13-07-2010, 06:15 PM
The_Ripper

@tonybam
Yes that's it, that post show some YAMON commands too,after you break boot and enter YAMON.

You have on first post "backup_kernel" file

After you set all networks data (for example)
setxenv y.gateway "192.168.1.1"
setxenv y.subnetmask "255.255.255.0"
setxenv y.ipaddr "192.168.1.5"
net up
net init
/* You will need working tftp server on PC machine */
load -b tftp://192.168.1.3/backup_kernel 0xb0100000
pflash write -f 0x80000 0xb0100000 0x680000
After that you should see Erasing and Writing, it will take a while, but after it finish you just reboot and you are back with original kernel and you can continue to upgrade FW over USB ....
13-07-2010, 06:43 PM
aspava

ma ku..c bi ovi nesta sami napravili da nije nasih mozgova.svaka vam cast,nije da mi je do E2,nego mi je drago da ste uspjeli:respect-067:
13-07-2010, 06:58 PM
4@@@@

@The_Ripper: Excelleent work.
The git is ready to use for some devs - you know where to have a look.
If all works well we will open it ro for the public.
13-07-2010, 07:47 PM
sattommy

Quote:

Originally Posted by The_Ripper

@single
Yes it works over busybox ...

@sattommy
I use mrua_SMP8634_2.8.5.1-celrun-08062009-2.6.15K_facsprod_legacy_dev.mips, this MRUA packet, but now for compilation part , you will need gcc over glibc and to add this switches
L=/MMP/tmp -> for example
gcc ********** -Wl,--dynamic-linker,$L/ld-uClibc.so.0 -Wl,-rpath-link,$L/
With this you will tell what LD library to use and on start where to search for libs
So all MRUA uClibc libs/main uCLibc libs must be in that paths.

This is how should look after for example you open binary in IdaPro

Code:

.init:00401208 # Format : ELF (Executable) .init:00401208 # Imagebase : 400000 .init:00401208 # Interpreter '/MMP/tmp/ld-uClibc-0.9.27.so' .init:00401208 # Needed Library 'librmcw.so' .init:00401208 # Needed Library 'librmcore.so' .init:00401208 # Needed Library 'libruahdmi.so' .init:00401208 # Needed Library 'librua.so' .init:00401208 # Needed Library 'libllad.so' .init:00401208 # Needed Library 'librmhdmi.so' .init:00401208 # Needed Library 'librmedid.so' .init:00401208 # Needed Library 'librmi2c.so' .init:00401208 # Needed Library 'libruai2c.so' .init:00401208 # Needed Library 'librmsha1.so' .init:00401208 # Needed Library 'librmcec.so' .init:00401208 # Needed Library 'libstdc++.so.6' .init:00401208 # Needed Library 'libm.so.0' .init:00401208 # Needed Library 'libgcc_s.so.1' .init:00401208 # Needed Library 'libc.so.0' .init:00401208 # Library Search Path '/MMP/tmp'

EDIT: Not gcc over glibc, it's gcc over uClibc, sorry for confuse ...

Can I use the debian install you explained earlier? Where do I get the uclibc files, can i get them from you enigma2 image. Where do i put the dynamic linker stuff?

Thnx for the hassle
13-07-2010, 08:24 PM
4@@@@

@The_Ripper and Mickey_Sa: Please post the unpacked software to install on the internal HDD with the vmlinux.bin or compile the kernel with nfs to test over nfs.
13-07-2010, 08:42 PM
The_Ripper

@sattommy
Find and download smp86xx toolchain and MRUA I mentioned,just extract it and export toolchain environment script "toolchain-path.env" and you have ready uclibc compiler.
For where to hold libs files on receiver DOM it's up to you, when compiling ,with -L switch you will need to point location to MRUA libs , they are in "extracted folder/lib" of the MRUA packet.

@4@@@@
I will see to upload somewhere just vmlinux.bin ....
13-07-2010, 09:15 PM
4@@@@

@The_Ripper. Thanx - the files are already on my nfs mount. So please compile nfs support in the kernel.
13-07-2010, 09:41 PM
tonybam

Quote:

Originally Posted by The_Ripper

@tonybam
Yes that's it, that post show some YAMON commands too,after you break boot and enter YAMON.

You have on first post "backup_kernel" file

After you set all networks data (for example)
setxenv y.gateway "192.168.1.1"
setxenv y.subnetmask "255.255.255.0"
setxenv y.ipaddr "192.168.1.5"
net up
net init
/* You will need working tftp server on PC machine */
load -b tftp://192.168.1.3/backup_kernel 0xb0100000
pflash write -f 0x80000 0xb0100000 0x680000
After that you should see Erasing and Writing, it will take a while, but after it finish you just reboot and you are back with original kernel and you can continue to upgrade FW over USB ....

Hi
can this procedure run in windows or it should be in linux, which nightmare for my self as i am only windows user.
i will try in the week-end to try this. and will post my result.
13-07-2010, 09:55 PM
tx0

I've missed all the fun. and now "The uploader has removed this file from the server." How was that? HD support? recording? everything was OK? :(
13-07-2010, 10:27 PM
digihoe

Quote:

Originally Posted by tx0

I've missed all the fun. and now "The uploader has removed this file from the server." How was that? HD support? recording? everything was OK? :(

What file? All files are uploaded in this thread.
13-07-2010, 10:54 PM
single

Quote:

Originally Posted by single

What version of GPL Code?

EDIT:
Back to do one more question...

Because of kernel can't see usb stick's....

If usb modules are incompatibility with kernel, then they can't be loaded, then if you compile new usb-storage ...bla bla for this kernel how usb drive can be compatibility with this new kernel?....

Modules can be linked with kernel (M) or can not, what is the best choise?...

WDTV_Live_GPL_code_package_1.0?.? ?.zip

Ok looks like is hard to tell things...

And all you now I don't have this box... rrrrrrrrrr

Anyway i will make my posts because Helder is a good friend...

On filesystem i have from Opensat, i don't extract this one yeat, I saw the linux used is 2.6.15 here we can find the modules:

Ralink 3070 chipset r**070sta.ko (wireless) - this can be compiled on new kernel because of android port.

RaLink RT2561/RT61 PCI Wireless Card rt61.ko (wireless) - this can be compiled on new kernel because of android port.

sckernel.ko - is smartcard used by Opensat, then have no use here...

em8xxx.ko - processor (no use have no DirectFB) is need a em8xxxfb.ko.

sr_mod.ko - for RHEL 6 to see CD-ROM devices

fuse.ko - Fuse

ftdi_sio.ko - Linux FTDI USB

cdrom.ko - Usb Cdrom (in this stb)

usbserial.ko -USB

llad.ko - llad kernel module for standalone configuration (can someone type modinfo llad.ko on shell and put here output???)

....

What is missing here?

azbox_frontend.ko (Frontend device)

azbox_dvb-core.ko (DVB)

azbox_dvbs2tuner.ko (Tuner for Sat)

azbox_dvbts2.ko (Tuner for TDT).

azbox_control.ko (remote control).

azbox_rf.ko (RF).

azbox_frontpanel.ko (Frontpanel).

azbox_ic2.ko (ic2). (For example: PI5V330 Low ON-Resistance Wideband/Video Quad 2-Channel MUX/DEMUX or MAX11506, MAX11507 Low-Cost, 6-Channel SD Plus HD/SD Selectable or The TVP5150 device is an ultralow-power video decoder for NTSC and PAL video signals...)

Note: TVP5150 can be find on android.

Well, this is missing, correct?...

(I my forget something...)

Somewhere we have too:
em8xxxoss.ko
em8xxxalsa.ko
13-07-2010, 10:59 PM
oguzhak

my azbox's problem continous. the box shows BOOTING and doesn't go any further. Also it doesn't detect the stick, which would be useless anyway.
tell me please how this problem will be solved. Could you pls explain
13-07-2010, 11:07 PM
tx0

Quote:

Originally Posted by digihoe

What file? All files are uploaded in this thread.

haven't noticed the links below. Have you tried it? How is it?
13-07-2010, 11:31 PM
digihoe

Quote:

Originally Posted by tx0

haven't noticed the links below. Have you tried it? How is it?

No I have yet to try it.
14-07-2010, 12:46 AM
freshmaker

you have in atach
Premium Plus E2.rar (44.70 MB, 50 views)
14-07-2010, 07:37 AM
oguzhak

please help me ...please...my box is not running still....
tell me a way for solve...
14-07-2010, 08:27 AM
wullieb25

how do i solve this guys im stuck with a box that i cant do anything with.

the new e2 is still on the dom but i have no internet access so i cant connect to it to revert back to the origional so im stuck with a box that i cant do nothing with
14-07-2010, 08:28 AM
sattommy

Quote:

Originally Posted by wullieb25

how do i solve this guys im stuck with a box that i cant do anything with.

the new e2 is still on the dom but i have no internet access so i cant connect to it to revert back to the origional so im stuck with a box that i cant do nothing with

get a rs232 cable, connect and invoke a net init & net up in yamon. This solved my problems. had internet since then even after i unplug the power for a while.
14-07-2010, 08:32 AM
wullieb25

thanks m8 i have an rs232 cable but there's no connection on the box for it
14-07-2010, 08:37 AM
sattommy

Quote:

Originally Posted by wullieb25

thanks m8 i have an rs232 cable but there's no connection on the box for it

You need an rs232 to ttl converter like an old nokia cable. There is some thread explaining on this forum
14-07-2010, 08:42 AM
wullieb25

thanks m8 i've found the thread al need to buy the ttl converter to get this up and running again so once connected by serial do i need to transfer any files if so which ones
14-07-2010, 08:48 AM
PsiDOC

Quote:

Originally Posted by wullieb25

thanks m8 i have an rs232 cable but there's no connection on the box for it

You also need an RS232 to TTL interface as well as the Reciever works on 3 - 5 volts and RS232 is +/-12 volts so the all you'll read on boot is garbage without it as the signal levels are too low. They're available on the 'bay cheaply or you can build one youself using a MAX232 chip and a few capacitors.

The connections inside the AZBox for the rs232 are below.

http://i50.tinypic.com/esnwqt.jpg

Picture gratuitiously pogged from This Thread!

Psi
14-07-2010, 08:54 AM
wullieb25

thanks very much for your help guys would this do the job

h**p://cgi.eb*y.co.uk/RS232-TTL-converter-MAX232-/270603231174?cmd=ViewItem&pt=UK_B OI_Electrical_Components_Supplies _ET&hash=item3f01359fc6
14-07-2010, 09:16 AM
kanber_kav

Quote:

Originally Posted by oguzhak

please help me ...please...my box is not running still....
tell me a way for solve...

cihazı düzeltemedinmi.
14-07-2010, 09:59 AM
digihoe

Quote:

Originally Posted by sattommy

You need an rs232 to ttl converter like an old nokia cable. There is some thread explaining on this forum

Or the old season interface.
14-07-2010, 10:24 AM
moicas3004

Quote:

Originally Posted by The_Ripper

@all
For all people who got stuck just in BOOTING in vfd display, box isnt dead, but to back in original state there is 2 more posible ways:
1. Is serial cable and hardware interface to hook up to receiver board, user "telesat" put schematic diagram here on forum, just search it ...
2. Is to remove DOM from receiver/board and hook it up to external IDE rack. "telesat" is writing right now some tutorial because power connection isnt the same, so it will need some explanation what to do about that, plus he will upload what to put in DOM and with what partition app. So pls stay tuned .

If this 2 posibility is hard for someone, then unfortunately there is no other way, I can just apologize to everyone and to ashure that their receiver isnt damaged in terms of hardware.

---------
I added now in new kernel build initramfs root filesystem, so if needed rescue shell it will enable ftp/telnet and show you your IP address from dhcp app on VFD so backup original FW will not be the problem any more.

1 - You dont have to apologize to anyone, because in this topic it already says that this firmware is very beta and only for test. Only tests who whats to doit at their own risk.

2 - I just love your dedication to this reciver, first with Mbox and now with this enigma FW.

3 - I think you, and the guys who are helping, to create a svn, or an svn tracker, like OSCAM to anyone who wants to help to get their hands on the job. Other team just dont want to help because there is no GPL, or SVN to pick up and help you guys.

Continue the good work.

PS: I have a FW with a diferent version postes in another site E2 1.0.8. Is this a real file from you guys , because the version you have lunched was E2 1.0.7.
14-07-2010, 11:05 AM
MickeySa

I can confirm, only one version, which is real and public is 1.0.7 .

Cheers
14-07-2010, 11:15 AM
moicas3004

Quote:

Originally Posted by MickeySa

I can confirm, only one version, which is real and public is 1.0.7 .

Cheers

OK thanks. So version E2 1.0.8 Is a FAKE.

ATTENTION GUYS do not use it. Version posted on another site as Patch_4973.bin is a FAKE.
14-07-2010, 11:35 AM
halabessa

Tutorial with pics for "back to original FW"

Hi Guys,

Found this on another forum.... thanks to "erminio"..... & translated by google

"GUIDE FOR RESTORING FIRMWARE ORIGINAL BY CUS2K (TechSat-forum)
attached files
- Update
- Backup_kernel
copy "update" in / tmp (set to 755)
copy "backup_kernel" in / MMP
telnet
type: cd / tmp
in tmp, type:. / update / MMP / backup_kernel
and the decoder are restoring the preparation to receive the file from usb patch.bin (with firmware az or more E2)

HOPE it can help:bravo-009:
14-07-2010, 11:40 AM
buyukbang

Completely agree.

@Ripper ,

Thanks for your great job and dedication ! Waiting good news from you and other friends working on E2 !

Quote:

Originally Posted by moicas3004

1 - You dont have to apologize to anyone, because in this topic it already says that this firmware is very beta and only for test. Only tests who whats to doit at their own risk.

2 - I just love your dedication to this reciver, first with Mbox and now with this enigma FW.

3 - I think you, and the guys who are helping, to create a svn, or an svn tracker, like OSCAM to anyone who wants to help to get their hands on the job. Other team just dont want to help because there is no GPL, or SVN to pick up and help you guys.

Continue the good work.

PS: I have a FW with a diferent version postes in another site E2 1.0.8. Is this a real file from you guys , because the version you have lunched was E2 1.0.7.
14-07-2010, 12:07 PM
single

Hi

Off topic:

@ADM & MODS

Can you please move post from "(How to) RESTORING E2 FIRMWARE TO ORIGINAL" sub for other post with same name?

Thanks in adv

Back to this post...

About i2c @Ripper can you add to kernel config:

set to Y:
CONFIG_I2C_DEBUG_CORE
CONFIG_I2C_DEBUG_ALGO
CONFIG_I2C_DEBUG_BUS
CONFIG_I2C_DEBUG_CHIP

and please put output here, tk's.

About USB I think you froget to add:
CONFIG_USB_DEVICE_CLASS=y

:respect-013:
14-07-2010, 12:49 PM
The_Ripper

@single
It will be activated in next test ...

Show 40 post(s) from this thread on one page

All times are GMT +1. The time now is 07:31 AM.