ok finished installing and got the same result...
i ll try again but format the application area first...
Printable View
ok finished installing and got the same result...
i ll try again but format the application area first...
Guys relax!
Just reboot with the USB stick connected with the E2 firm, it should go into Recovery Mode, and show the IP on the VFD.
Launch AzUp and reinstall E2 firmware. Thats it!
I'm just finishing the service scan.
edit: read latest outsidaz_ post :)
Decoder was blocked to:
So i have done the rescue procedure with AZup(only 2min35seconds :) ).Quote:
Geeko :P
Everything returned as before with plugins,settings and cams :) :respect-051:
no, flash with patch.bin by the ripper using fat32 usb, then box will reboot after update,and an ip will appear in VDF (don't remove USB) after that open AZup and just press upload. enigma2 will be installed when it finishes :)
here just finished :) gonna test.
Ok, everything is working fine, except for no picture/audio.
Wasn't this release supposed to have the video/audio drivers?
did u test any FTA channel or movie? (.avi or mkv) ?
it looks like the audio/video drivers are not included coz when you go into their settings, the box crashes....
What a FAST navigation though!!!!!!!!!!!!!!!!!!!!
yes, navigation is pretty smooth and fast. but for me is a green screen too.
and no audio or video in FTA channels.
same here....
except the green tint you re experiencing....
i got green screen when i went to audio/video config in system menu.
navigation is damn fast and smooth, i did manage to search channels without any problem at all.
but no image or audio.
any coder around? :)
I t looks like we should have more patience....
The whole project looks very promising!!!!
mine crashed and rebooted...Quote:
Originally Posted by hfmls
avi no good
mkv no good
mp3 is working :)
is it normal to get the message unsupported fw ver after install?
hmmm, no. do update via menu, then after reboot see wich ip u have in VDF and put it on azUP and update.
Not suitable for Premium+, is that the case?Quote:
Originally Posted by kooleracer
what a shame i was hoping to be able to wack CCCam onto it tonight and half abit of a play! but never mind... it looks very promising! navigation is very smooth and quick guys.
@coders
any idea as to when the audio/video will be implemented? and also the hardrive instalation?
cheers and keep up the brilliant works guys
...little (more) explanation about how to put e2 on azbox :
1. Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB Memory Stick
2. Turn Off Your AzBox HD Device, put USB Memory Stick inside and Turn on AzBox HD Device.
3. Follow the procedure USB Update on the screen, (patch version: 1.0.21 E2 by TheRipper, press OK, wait to finish, reboot - don't remove stick !)
4. Start AZUp , write IP adress of AZBox (see VFD), then click on Update button on AZUp, wait and follow message on AZUp and VFD, when all done - wait for reboot msg on VFD and then remove USB stick
btw, don't forget, this is not beta ver. of E2 , this is only test ver. because some people intentionally disparage this project and say : this is fake ...
and this is only presentation how tuner work and scann also.
please be a patient, soon, very soon beta ver of e2 with all function coming :)
but pls, I have a request to all of you, if you want E2 (fast to be ready) - pls don't distrb TheRipper and other and pls try to believe what we say , because , as in this case, only lose time in unnecessary debates
OK , i understand, always will be the provocateurs as Kanber , but pls You condemn their behavior
rgs,
==========
03:13:00.357 CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
03:13:00.357 CCcam: ================================= ==========================
==========
03:13:00.358 CCcam: online using nodeId 37a1c45e07bfae94
03:13:00.364 CCcam: dvb api3 detected
03:13:00.366 CCcam: DM7025 detected
03:13:00.366 CCcam: create 8 cam device(s)
03:13:00.609 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
03:13:00.609 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not foun
03:13:00.610 CCcam: static cw not found or bad
03:13:00.617 CCcam: parsed 0 entries from /var/etc/CCcam.prio
03:13:00.618 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or n
t found
03:13:00.619 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or
ot found
03:13:00.620 CCcam: server started on port 12000
03:13:00.933 CCcam: no working cam devices, no need to start pmthandler
edit: oh ok telesat :)
we'll wait. so no need to test if we can open channels or media in mediaplayer?