Printable View
Instead of all the bickering on here!
Why don't we ALL just wait until the team have a sold working E2 on the Azbox, what's the point in having a beta that is full of bugs, and then everyone will moan about things that don't work properly!
Ripper hats of to you and the team, but i beg you to hold off on the release until it's stable and working, People will have to wait until YOU decide when it's stable enough to release.
This is my first post and most prob my last,
MickeySA already told that image is stable, plus the more users test it, the more we can report about bug/stability. and the more can help fixing bugs.
since the_ripper said that all is opensource (other than drivers).
Thank you RIPPER!
The keyboard and the wifi work ?
Thanks guys!
Why .... they are showing self control, education, passion & professionalism!
:respect-040: :bravo-009:
Best Regards
Arci
Indeed and guys just wait untill you are happy with the job so far!
Not because all kind off people want another proof off concept!
Once more :bravo-009::respect-055:
Is this theCX24116 standard dvb-S2 tuner for AZbox's or are there other AZbox's with a different kind of tuner?
CX24116 is standard in the Premium HDQuote:
Originally Posted by kooleracer
Not sure what is in the Premium HD+ Plus?
Quote:
Originally Posted by MickeySa
I think de elite has the cx24118 can anyone confirm this? So will the elite HD be able to run the beta?Quote:
Originally Posted by xanadu
Cheers.
For a answer see these posts:Quote:
Originally Posted by kooleracer
https://www.satpimps.co.uk/showpost....&postcount=149
https://www.satpimps.co.uk/showpost....&postcount=151
The Frontend with Cx24116 Demod-chip is only for the Elite and the "normal"
Premium Models.
ST drivers (Premium+)for E2 exists,but only for SH4 platforms.
So "someone", needs time to compile it,for sigma-mips.
Quote:
Originally Posted by pascha99
Hope this is possible in not too distant future? :confused: :cool:
Linux drivers in this site:
_http://lxr.free-electrons.com/source/drivers/media/dvb/frontends/
Included:
- Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver
- STV6110(A) Silicon tuner driver
- STV0900/0903 Multistandard Broadcast Frontend driver
- Etc ...
Regards!
Maybe kanber_kav can make them easy, as far as I can see, somebody mentioned that he is coder, and as far as I can remmember he was running E2 under PC :D so probably he have enough knowledge to finish them ;)Quote:
Originally Posted by pascha99
Yes,of course!Quote:
Originally Posted by MickeySa
But,i think that these drivers he programmed,scans only turkish satellite and
programmes.:D
Pre-announcement for loading Enigma 2 in AzBox HD Elite / Premium devices by USB Memory stick and this method is 100000% RISK FREE !!! As the new beta image will follow in next hour(s) .
Thanks to the the_ripper, telesat, Darezik and other people involved in this project.
If You want to load this version of Enigma 2 for AzBox HD Elite / Premium please follow this procedure :
1 . Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB Memory Stick
2. Turn Off Your AzBox HD Device, put USB Memory Stick inside and Turn on AzBox HD Device.
3. Follow the procedure USB Update on the screen, after process is finished, remove the USB stick from the AzBox HD Device, and let AzBox HD to Reboot
4. After reboot is finished, You should be in Enigma 2 AzBox HD Running state
5. If You tested enough Enigma 2 on AzBox HD Device and want to be back on AzBox Official Firmware, it is piece of cake
6. Load on FAT32 Formatted USB Memory stick patch.bin ( Official AzBox HD Firmware e.g 0.9.5020 ) .
7. Turn Off AzBox HD Device, put USB Memory stick in Receiver, and Turn it on.
8. On VFD You will see RESCUE MODE and IP Address will be listed.
9. On Your PC run application called AzUP by our team member telesat, enter IP of Your AzBox HD Device and click on UPDATE
10. Wait that Update is finished, and You will have again AzBox HD Official Firmware
This is totally RISK FREE Installation and Recovery procedure for AzBox HD Elite / Premium Devices !!!
Please, just follow procedure, and You will not have any problem at all, as this procedure was tested many many times internally by our team.
Well... what can I say??
Just... :bravo-009:
For all of you guys (all team) are doing for all of us! A great job needs a great and honest thankful from one of us here!
Bravo again! :bowing-036:
Best Regards my friends!
Well,
Just to be honest, we are so pleased how the users are patient and how they are supporting us, but also to be clear and honest as we was from the beginning, when we was telling to all of You that we will inform You every step and so on, and some of the users, e.g kanber_kav, started mining this team and the_ripper and other guys work, we want to publish new beta, and that You finally and for last time see, that behind us is real work and not some "fake" things, which also kanber_kav cant describe or even he dont have anything to say as he dont know what he mentioned and attacked....
So dear friends, lets enjoy in better future of this box, and once more, lets define, who are good guys and who are bull****ers ;) recognize them in this thread....
bring it on!! :D :D :D
we can't thank you enough.
for patience, rescue method, for enigma2 with full codec support (first box to have it i think)
for all your hard work, and free for us, users.
edit: i just wish to see all the haters face after this is released :)
Quick question which versions of cams extra will we use ?
i dunno about that. but first thing i'll test is oscam dvbapi, using oscam cccam client connected to my other box (instead of openxcas-multicas) (hope it will work as dreambox, in theory yes).
Then with this version would we have native Cccam and emuladoras native?
And the official card-integrated as in the dreambox?