that looks rite, it may be the case that the key's have changedQuote:
Originally Posted by j@mes
Printable View
that looks rite, it may be the case that the key's have changedQuote:
Originally Posted by j@mes
Hi
Thanks for reply Speedy_04.
Just put in latest keys still no joy right after Compass uploaded them.
Should i change anything in Technomate.
At mo I enter 8281 and and put Newcamd on. Don,t enter any details.
I also notice log says can't connect to Host?
Doing me head in.
Going back to me dreambox for a rest
Thanks for help
Any further help greatly appreciated. Cheers!
make sure the patch you use has sssp enabled in it, in the technomate receiver make sure that the sssp is on. in the 5400 usb super its in the options menu and use 9797 on a nova cy channel to show the ecm menuQuote:
Originally Posted by j@mes
Thanks for that.
Will give it a try tomorrow after one of the key changes. I know sssp is enabled and is on. Have not tried 9797 ecm thingy.Thanks again for assistance.
what about tm600 on ur image has that got ssspQuote:
Originally Posted by speedy_04
update Nova Cyprus Next key 06 & active key 08 18-04-2010 1st
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
Nova Cyprus Next key 08 Updated 18-04-2010 2nd
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
Sorted.
Downloaded latest key still no joy.
Rechecked everything-no joy
Re-installed SBCL withvPlug and installed latest key. All ok.
Many Thanks speedy_04 for all your help
And of course Many Thanks Compass for key updates
bingo got it working at last, were i was going wrong was i had not turned on sssp on my tm6900 non super, turned this on and bingo. love it wen a plan comes together. thank you to all for advice and help.:respect-023:
Quote:
Originally Posted by dodgybrook
if the patch for the box has sssp then yes
Nova Cyprus Next key 06 Updated 18-04-2010 3rd
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
Nova Cyprus Next key 08 Updated 18-04-2010 4th
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
Nova Cyprus Next key 06 Updated 18-04-2010 5th
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
Nova Cyprus Next key 08 Updated 18-04-2010 6th
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
Trying this on tm 6900, downloaded above but had to move SBCL v1.0i.exe to plugins folder to run it so far i got -
COM Connected
COM RX ??? 01000D3C91886FE1F906040324000000
any help welcome
have you got wsp running?? or have you got the vplug active?? and the latest keys
Please look at post 49Quote:
Originally Posted by seti
May help you
how do i find ssp on ur image
Hi guys,
Ok maybe someone can help me this time please. please see the screens shots below. One screen shot is after pressing 9797 on tm1500. This was the very first patch released with sssp. Maybe its too old if anyone can advise on a better patch then please let me know. Every thing is connect I believe everytime I change a channels airliquide changes data. The channels seems to take sometime to come up scrambled. Just dont know where I'm going wrong. I asume keys just go in the plugins folder. Vplug is activated.
that wsp looks diffrent to the one i use, dont mix them up as one is for c+nl and uses tuner 1 where the one for nova cy say's sherif 333 but it all looks right to me, just add the latest v_key to the plugin folderQuote:
Originally Posted by kegnkiwi
@dodgybrook check your pm mate
on the second image
of sbcl1.0i
you have selected emu
tick the following
auto start
& debug
make sure Vplug is active (it should be ticked)
also Show monitor
look to see if the check boxes are Ticked
Active (won't work if it not ticked)
Auto ECM (ticked or un ticked doesn't matter)
Auto Pmt (ticked or un ticked doesn't matter)
Auto Cat (ticked or un ticked doesn't matter)
are you sure you are using the correct sbcl & wsp for Nova CY & bulsat the reason i say this is airliquide wsp was in the zip that opens c+ned 19e & doesn't include the special plugin to decrypt Nova & Bulsat ecm's Caid 0604
If your unsure delete it and re download it from post 1 in this thread & update the v-Keys last attachment in this thread.
It is also important to select the correct comport the same as you would use for your Darkman loader.
I'm using 307p for Tm1500 ci super works well with sssp
I have been trying to get this working for a few days now , with three computers windows 7 64 and 32 also XP.
I have a Technomate 6900 hd patched and with sssp turned on and have set the Technomate Edit Filter to 0622 000000 .
But i can only get it to work for about 30 seconds.
Any advice would be most welcome.
Sightworthy
Nova Cyprus Next key 06 Updated 18-04-2010 7th
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
Nova Cyprus Next key 08 Updated 18-04-2010 8th
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
hi compass thanks for your input, just one quick question before I play today, in post one the cy and bulsat fix when I run sblc it came back with libeay32.dll is missing from your pc. Now I have found another version of this file maybe the canal Nl file and it has the libeay32.dll file in it. Would you know if they are interchangeable or is there something specific in each.
Just to thank compass I have managed to get Bulsat clearing so the libeay32.dll is generic. Many thanks, now to get nova clearing and write a tut.
ki
Nova Cy Is down atm
ACTIVE KEY 06 currently unknown
NEXT KEY 08
we wait for keys
Nova Cyprus Next key 06
& Active Key 08
Updated 19-04-2010 1st
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
Couple of quick questions will this work with the new CCcam patches I have 716P.
How do you enable SSSP with this patch.
When I first installed vplug for Nova Cy libeay32.dll was missing to correct this I pasted it into the plugins folder?
Is this ok.
At the moment I am getting green connected but com port not found
Ed
Hi been on with this for a few days now, got everything up and running, still no picture, only thing i can see is on SBCL there is no vplug tab (see pics), i,ve reinstalled 6 or 7 times still the same, any idea's
regards, pauls.
(TM 5400 ci+ usb s/w 176p Mar 23 2010)
Bulsat Next key 04
& Active Key 02
Updated 20-04-2010
Bulsat ok
Nova CY ok
Unpack & copy and paste in sblc plugins folder v_keys
@pauls
This would suggest there is no Plugin folder in the sbcl Directory.
vPlugin tab should appear next to sbcl on the top left.
Suggest you reinstall sbcl and wsp from the first post. Page 1 of this thread.
https://www.satpimps.co.uk/showthread.php?t=131000
@J@mes
thanks for the reply. I've downloaded unpacked and deleted the zip another 3 times, each time the plugin folder was there but when i started SBCL the vplug tab was not there. Is there a particular way to unpack the zip?
regards,
pauls.
Pauls,Quote:
Originally Posted by pauls
Extract all folders To the same Place Eg: I extracted sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed to my Desktop!
If you pinned sbcl to start menu this could be the reason as to why vplug isn't present.
1. open (sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed) folder
2. open (SBCL_ vpulg for humax 23.01.10r) folder
3. & start (SBCL v1.0i.exe)
You can pin wsp to start menu (but not Sbcl1.0i as it won't load Vplug)
hope this helps
i have been trying this for days but can not get com port to open ,nearly giving up .
Hi COMPASS.
I've done as you have said
extracted sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed to my Desktop
open (sbcl with v plug V2.4.3 & Wsp_Nova_CY_Fixed) folder
open (SBCL_ vpulg for humax 23.01.10r) folder
click (SBCL v1.0i.exe)
then click run
i then get 2 error messages
libeay32.dll was not found (click ok) then
the specified module could not be found : C:\users\paul\desktop\sbcl
with v plug v2.4.3 & wsp_nova_cy_fixed\sbcl_vplug for humax
23.01.10r\plugins\vhelper.mdl
the only way i can get SBCL to open is to put the SBCL application into the
plugins folder and then start (SBCL v1.0i.exe)
it then opens but without the vplug tab
hope you can make sense of this
pauls.
@liamski
i had the same prob at first, have you checked
your pc port is the same as the port you are
useing in the WSP application.
Had to change my laptop to com port 1 to
match The WSP sherif333 com port 1.
hope this helps,
pauls.
If you have problems with sblcQuote:
Originally Posted by pauls
EG:libeay32 is missing (sblc doesn't work)
unpack libeay32.zip & copy and paste libeay32.dll into
:C:\WINDOWS\SYSTEM 32...
This will solve the missing Vplug issue.
You can also just put into the sblc folder. It was missing from mine and I can confirm that just putting into the sblc folder works.:respect-055:
Many thanks to COMPASS & Kegnkiwi,
put that into the sbcl folder and it worked a treet.
thanks again,
pauls.