But for using CCC as client it is a lot better to use 2.0.11 so you don't get limitations of distance 2 isn't it?
But for using CCC as client it is a lot better to use 2.0.11 so you don't get limitations of distance 2 isn't it?
Tried it now second Time, again segmentation fault. Maybe it dont like my Connection to NewCS.Quote:
Originally Posted by kanber_kav
So I give up with this.
Guys, Is it correct the command which runs the CCcam.mipsel like this:
/EMU/lib/ld.so.1 --library-path /EMU/lib /EMU/lib/CCcam.mipsel -dv -C /EMU/lib/CCcam.cfg&
This is just driving me crazy. I made an F line in CCcam.cfg to see if it acts like a server and tried to connect with my Debian PC server but it does not connect.
F: linux linux (This is in EMU/lib/CCcam.cfg)
C: 192.168.100.9 13000 linux linux (This is in my Debian PC)
but it does not connect. I am sure I chmod all files 755 and all files put in EMU/lib. Then I run this command /EMU/lib/ld.so.1 --library-path /EMU/lib /EMU/lib/CCcam.mipsel -dv -C /EMU/lib/CCcam.cfg&
but nothing happens.
You need to use correct format for real CCcam.cfg on 2.0.11 not use only CCC 0.2 format with this...
I used a real CCcam.cfg and edit it carefully and revised it many times but still no connection. I am just going to quit. Enough is Enough.
This really works thank you the_ripper
Small update ;)
I menage to emulate camd.socket over openxcasapi so now PMT can be sent to CCcam.
Download again archive from my post.
There is two new files and new patched CCcam 2.1.1 version.
Copy libdvbapi.so in /EMU/lib.
For dvbapi_module create /EMU/OpenXCAS/dvbapiCAS directory and copy there dvbapi_module , make new openxcas.conf and change module.seq.
There is small change on how you start now CCcam binary.
LD_PRELOAD=/EMU/lib/libdvbapi.so /EMU/lib/ld.so.1 --library-path /EMU/lib/ /EMU/lib/CCcam.mipsel -dv -C "where is CCcam.cfg" &
If all goes okey , you should see that CCCam is processing PMT and writing down CA systems ...
If dvbapi_module is manual started you should see CA_PMT datas in hexadecimal ...
PS. Pls people test it how this working before I try to menage somehow sending ECM to CCcam ...
@ripper
is there any solution for no reshare allowed servers???
best regards
Dont understand question ?
You want to reshare cards even if you dont have levels ?
Ripper
with existing cccam is it possible to force the use of a CAID when two exist. Sly uk now have to used 0961 and 0963 the 63 is used in the new white card. ccam defaults to 0961
with your first release I didn't manage to clear any channel because we lose HOP ...and my clines not allowed to reshare (payserver)...
Is there any chance to sort that out
cheers
Ciao e grazie The Ripper:cheers2:
Here you have my test
TD210[~]$ 17:46:04.093 CCcam: ================================= =================
====================
17:46:04.096 CCcam: starting CCcam 2.1.1 compiled on May 2 2009@20:00:30
17:46:04.097 CCcam: ================================= ===========================
==========
17:46:04.099 CCcam: online using nodeId ceca9e5d28121a6a
17:46:04.171 CCcam: dvb api3 detected
17:46:04.175 CCcam: DM8000 detected
17:46:04.176 CCcam: create 8 cam device(s)
17:46:04.197 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
17:46:04.198 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
17:46:04.199 CCcam: static cw not found or bad
17:46:04.281 CCcam: parsed 928 entries from /var/etc/CCcam.prio
17:46:04.480 CCcam: added 1284 provider names from /var/etc/CCcam.providers
17:46:15.562 CCcam: added 8833 channel names from /var/etc/CCcam.channelinfo
17:46:15.563 CCcam: server started on port 6969
------------------------------------------------------------------------------------------
TD210[dvbapiCAS]$ ./dvbapi_module
[OPENXCAS_API:Sun Jul 19 17:45:21.523] openxcas_open:285 ## dvbapiCAS
[OPENXCAS_API:Sun Jul 19 17:45:21.527] load_xcas_control:98 ## loaded controller
ID = 0x19760507
osdep_msq_server_open : key_request 0x2DC3D984 key_response 0x2DC3D985
osdep_msq_server_open : request msq is already created
osdep_msq_server_open : response msq is already created
osdep_msq_client_connect : key_request 0x2DC3D984 key_response 0x2DC3D985
Created CaPMT Socket
Creating openxcas API message thread ...
Thread Started
Waiting for connection ...
Got one ;)
Waiting for connection ...
Got one ;)
Waiting for connection ...
Nothing happen after this
I make zapping in many channels and nothing.
Regards.
@robins69
Check openxcas.conf and module.seq. Restart receiver ...
@iko
If I menage to start this working you will not loose any hop ...
wow!! mower this is great. if u need a azbox hd to test it all just say.
i'm helder in msn.
i'm using cccam 2.0.11 and ccc 0.2 at the moment.
you just could do whatever u want, it would be faster and easier? :)
This looks like a great idea... so if you get dvbapi_module emulated for native CCcam then you could also record via OpenXCAS anyway and we won't need to use CCC. We will get .prio and softcam.keys support too!
Today is the Big Day for the Community !!!
Thanx a million for your hard work ...
keep us posted ripper, mower :D
gather a few beta testers maybe i dunno.
i can do it
No one reporting is CA PMT sending is okey ?
Does for you CCCam parsing okey CA Systems on console ?
@The Ripper
I made the changes and restarted my box here you have my test again
TD210[~]$ 19:00:08.261 CCcam: ================================= =================
====================
19:00:08.265 CCcam: starting CCcam 2.1.1 compiled on May 2 2009@20:00:30
19:00:08.265 CCcam: ================================= ===========================
==========
19:00:08.267 CCcam: online using nodeId cb5bcb9f4c6f2d7c
19:00:08.338 CCcam: dvb api3 detected
19:00:08.342 CCcam: DM8000 detected
19:00:08.343 CCcam: create 8 cam device(s)
19:00:08.364 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
19:00:08.365 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
19:00:08.366 CCcam: static cw not found or bad
19:00:08.434 CCcam: parsed 928 entries from /var/etc/CCcam.prio
19:00:08.628 CCcam: added 1284 provider names from /var/etc/CCcam.providers
19:00:18.564 CCcam: added 8833 channel names from /var/etc/CCcam.channelinfo
19:00:18.569 CCcam: server started on port 6969
-------------------------------------------------------------------------------------------------
1107 root 420 S /EMU/OpenXCAS/dvbapiCAS/dvbapi_module
1109 root 420 S /EMU/OpenXCAS/dvbapiCAS/dvbapi_module
1110 root 420 S /EMU/OpenXCAS/dvbapiCAS/dvbapi_module
-----------------------------------------------------------------------------------------------
Here you have the results
18:56:44.791 CCcam: found nagra caid: 0x1810 ecmpid: 0x84f id: 0x0
18:56:44.791 CCcam: found seca caid: 0x100 ecmpid: 0x467 id: 0x4106
18:56:44.792 CCcam: cam[0] set PMT for sid=746c
18:56:44.792 CCcam: start EMM
18:56:44.793 CCcam: EMM demux 1 set
18:56:44.794 CCcam: EMM demux 1 read result 0
----------------------------------------------------------------------------------------------------------
This is another test while zapping
---------------------------------------------------------------------------------------------------------
TD210[~]$ 19:03:32.958 CCcam: ================================= =================
====================
19:03:32.961 CCcam: starting CCcam 2.1.1 compiled on May 2 2009@20:00:30
19:03:32.961 CCcam: ================================= ===========================
==========
19:03:32.969 CCcam: online using nodeId 48dbefec3ae50e6b
19:03:33.040 CCcam: dvb api3 detected
19:03:33.044 CCcam: DM8000 detected
19:03:33.045 CCcam: create 8 cam device(s)
19:03:33.062 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
19:03:33.064 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
19:03:33.067 CCcam: static cw not found or bad
19:03:33.136 CCcam: parsed 928 entries from /var/etc/CCcam.prio
19:03:33.331 CCcam: added 1284 provider names from /var/etc/CCcam.providers
19:03:43.372 CCcam: added 8833 channel names from /var/etc/CCcam.channelinfo
19:03:43.374 CCcam: server started on port 6969
19:03:50.554 CCcam: found nagra caid: 0x1810 ecmpid: 0x850 id: 0x0
19:03:50.555 CCcam: found seca caid: 0x100 ecmpid: 0x468 id: 0x4106
19:03:50.556 CCcam: cam[0] set PMT for sid=746d
19:03:50.688 CCcam: start EMM
19:03:50.689 CCcam: EMM demux 1 set
19:03:50.689 CCcam: EMM demux 1 read result 0
--------------------------------------------------------------------------------------------------------------
TD210[dvbapiCAS]$ ./dvbapi_module
[OPENXCAS_API:Sun Jul 19 19:13:25.535] openxcas_open:285 ## dvbapiCAS
[OPENXCAS_API:Sun Jul 19 19:13:25.537] load_xcas_control:98 ## loaded controller
ID = 0x19760507
osdep_msq_server_open : key_request 0x2DC3D984 key_response 0x2DC3D985
osdep_msq_server_open : request msq is already created
osdep_msq_server_open : response msq is already created
osdep_msq_client_connect : key_request 0x2DC3D984 key_response 0x2DC3D985
Created CaPMT Socket
Creating openxcas API message thread ...
Thread Started
Waiting for connection ...
Got one ;)
Waiting for connection ...
CA_PMT:
9F 80 32 81 9F 03 74 6D 2B 00 00 02 00 A3 00 1A 01 09 04 18 10 E8 50 09 11 01 00
E4 68 41 06 FF FF FF FF FF FF FF FF FF 26 EF 04 00 5C 00 1A 01 09 04 18 10 E8 5
0 09 11 01 00 E4 68 41 06 FF FF FF FF FF FF FF FF FF 26 EF 04 00 5D 00 1A 01 09
04 18 10 E8 50 09 11 01 00 E4 68 41 06 FF FF FF FF FF FF FF FF FF 26 EF 06 00 29
00 00 C0 00 D0 00 00 C0 00 DE 00 00 C1 01 88 00 00 C1 00 D5 00 00 C1 00 FD 00 0
0 C1 01 33 00 00 C1 01 64 00 00 C1 02 F8 00 00 C0 01 35 00 00 C1 03 78 00 00 C1
02 6E 00 00
--------------------------------------------------------------------------------------------------------------------
I made the test in console and using OpenXCAS
Regards.
TD210[dvbapiCAS]$ ./dvbapi_module
[OPENXCAS_API:Sun Jul 19 19:03:58.502] openxcas_open:285 ## dvbapiCAS
[OPENXCAS_API:Sun Jul 19 19:03:58.507] load_xcas_control:98 ## loaded controller ID = 0x19760507
osdep_msq_server_open : key_request 0x2DC3D984 key_response 0x2DC3D985
osdep_msq_server_open : request msq is already created
osdep_msq_server_open : response msq is already created
osdep_msq_client_connect : key_request 0x2DC3D984 key_response 0x2DC3D985
Created CaPMT Socket
Creating openxcas API message thread ...
Thread Started
Waiting for connection ...
Got one ;)
Waiting for connection ...
Read what theripper told robin, you need to reboot azbox without any emus... check that no emus start from OpenXCAS. After reboot go to telnet and test.
That's really works. Cheer.
not work dvbapi :(Quote:
Originally Posted by The_Ripper
Hi tinos,Quote:
Originally Posted by tinos
I did it and now my results are the rights, thank you for your advice.
Regards.
wow robin69, u opened a channell????
without CCC using dvbapi thing?
this means we have a full functional cccam...serving, receiving, opening channels. without losing hops.
Hello hfmls,
The Ripper wants to know if dvdapi_module can detect and receive the CA_PMT , he said the next step is send the right ECM to CCcam.
Right now I canīt open any channel but the comunication between CCCam and dvdapi_module is sucessfull.
Regards.
==================
19:22:53.907 CCcam: starting CCcam 2.1.1 compiled on May 2 2009@20:00:30
19:22:53.908 CCcam: ================================= =========================== ==========
19:22:53.911 CCcam: online using nodeId b428c409e1c7319e
19:22:53.933 CCcam: dvb api3 detected
19:22:53.938 CCcam: DM8000 detected
19:22:53.939 CCcam: create 8 cam device(s)
19:22:54.131 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
19:22:54.132 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
19:22:54.133 CCcam: static cw not found or bad
19:22:54.147 CCcam: parsed 41 entries from /var/etc/CCcam.prio
19:22:54.295 CCcam: added 972 provider names from /var/etc/CCcam.providers
19:22:57.866 CCcam: added 4409 channel names from /var/etc/CCcam.channelinfo
19:22:57.868 CCcam: server started on port 13000
MMP[~]$ 19:23:36.885 CCcam: enigma interface: disconnected (0)
19:23:43.401 CCcam: found viaccess caid: 0x500 ecmpid: 0x2ce id: 0x23800
19:23:43.447 CCcam: found viaccess caid: 0x500 ecmpid: 0x2d8 id: 0x40810
19:23:43.447 CCcam: cam[0] set PMT for sid=36b3
19:23:55.277 CCcam: found viaccess caid: 0x500 ecmpid: 0x2ce id: 0x23800
19:23:55.277 CCcam: found viaccess caid: 0x500 ecmpid: 0x2d8 id: 0x40810
19:23:55.278 CCcam: cam[0] set PMT for sid=36b9
@kanber_kav
This isnt real linux dvb api. I cant coded reall dvb api library because I dont have access to openxcas api source and how it deals with sigma chip.
libdvbapi just intercept CCcam calls to /dev/dvb/ paths and telling him that there is demux , ca devices on box...
oh ok. now i see. that's really nice.Quote:
Originally Posted by robins69
:) so it's working. next step
I've tried but no luck so far
fw 0.9.2373
@kanber_kav
I have same fw version , check openxcas.conf and module.seq, check if folder is right /EMU/OpenXCAS/dvbapiCAS/
is this new one has worked for anyone here?
cheers
fw=2371
emus runnings dvbapi
and manual telnet command to run cccam 2.0.11
all good. no image, but CA_PMT: with a bunch of AS F4 F3
showing, this is good right?
it means dvbapi the_ripper made it's comunicating with cccam right?
Quote:
Originally Posted by The_Ripper
is it possible to make virtual (emulated) /dev/dvb device and to resend the data to openxcas like you make it with ccc before.
only an idea
http://img27.imageshack.us/img27/6168/adszocg.jpg
no decode
telnet ..
cccam start command
LD_PRELOAD=/EMU/lib/libdvbapi.so /EMU/lib/ld.so.1 --library-path /EMU/lib/ /EMU/lib/CCcam.mipsel -dv -C /EMU/lib/CCcam.cfg
telnet dvbapi start
cd /EMU/OpenXCAS/dvbapiCAS
./dvbapi_module
but no decode
All emu off ..
http://img193.imageshack.us/img193/3646/adszkps.jpg
pardon
me CCcam.cfg
line DVB API=-1 :d
now runing CA_PMT:xxxxxxxxxxxxxx
work but no ddecode channel
OKey here is next stage , sending ECMs.Need alot of testing.
Just replace dvbapi_module and libdvbapi files.
@kanber_kav
You should really start reading my posts carefully!