I thought about, but I cant get access after that. It has worked bevor rebootQuote:
Originally Posted by terrorman
EDIT!
OK, also solved :)
cd /etc/webmin
./start
Then edit in etc the configfile:referers_none=0
save and try again, now works.
Printable View
I thought about, but I cant get access after that. It has worked bevor rebootQuote:
Originally Posted by terrorman
EDIT!
OK, also solved :)
cd /etc/webmin
./start
Then edit in etc the configfile:referers_none=0
save and try again, now works.
salutQuote:
/etc/init.d/webmin status
/etc/init.d/webmin restart
/etc/init.d/webmin stop
TXT
/usr/bin/webmin.sh -> chmod 755
later runQuote:
#!/bin/sh
clear
/etc/init.d/webmin $1
/etc/init.d/webmin status
Quote:
MMP: webmin.sh restart
Quote:
MMP: webmin.sh start
Quote:
MMP: webmin.sh stop
You can mount the usb as hda? :rolleyes:
Hi.
I´ve just installed debian and cccam on premium.
All ok.
When i start cccam, all goes well, but no image.
cccam is running, i see it at ip:16001, all cards are available, but image doesnt clear.
Do i have to start anything from plugins?
yes, a cccam client.
You lose one Hop with this
Is this an OS to overwrite the azbox firmware?
no, please read the Manual written
Anyone know what this means
AZBOX:/tmp# ./CCcam.mipsel -dv
12:34:51.766 CCcam: ================================= ===========================
==========
12:34:51.772 CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
12:34:51.773 CCcam: ================================= ===========================
==========
12:34:51.774 CCcam: online using nodeId 3c87603d15041199
12:34:51.790 CCcam: Cannot open /proc/cpuinfo
12:34:51.791 CCcam: create 1 cam device(s)
12:34:51.797 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
12:34:51.799 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
12:34:51.800 CCcam: static cw not found or bad
12:34:51.801 CCcam: parsed 0 entries from /var/etc/CCcam.prio
12:34:51.805 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or no
t found
12:34:51.807 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or n
ot found
12:34:51.809 CCcam: server started on port 12000
Segmentation fault
AZBOX:/tmp#
Segmentation fault= crash
Maybe they have done again something against wrong CPUs
Isn't cccam 2.1.3 only available for the dreambox yet.
Think this isn't a compilled azbox version
waiting...
pd: this cccam version speed 100% zapping and resharing
in azbox hd?!
zapping is good? allways opens channels?
Azbox Debian runing CCCcam 2.1.3Quote:
Originally Posted by xlrate
chroot debian
mount -t proc /proc /proc
and runing CCcam.mipsel -d
:D
does dvbapi_module
works now like draembox?
without glitches freezes and sometimes doesnt open any channel?
If you try to run it directly on the azbox. Without debian you get no further than this:
MMP[lib]$ /EMU/lib/ld.so.1 --library-path /EMU/lib /EMU/lib/CCcam.mipsel -d
09:15:07.471 CCcam: ================================= ================================= ====
09:15:07.476 CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
09:15:07.479 CCcam: ================================= ================================= ====
09:15:07.483 CCcam: online using nodeId 8d9a480d94d42046
09:15:07.491 CCcam: read config: cannot open /var/etc/CCcam.cfg or not found
09:15:07.498 CCcam: DM7025 detected
09:15:07.500 CCcam: create 8 cam device(s)
Any suggestions?
Hi
Has anyone tried to upgrade this debian install to lenny (stable) or squeeze (testing)?
tia,
skycdt
if they only made a progress for the_ripper work and improved real CCcam,it would have been fantastic.:07:
@sami8519
It's on the way ....
Thanks alot mate for the great news.God bless you.
cool
Good news! Can you give an indication? :cup-006:Quote:
Originally Posted by The_Ripper
Hello everybody. I'm having problems with my spanish nagra card in my azbox. I can't get reading it.
I wonder if running debian on Azbox I could use the same combinations and versions of cccam, newcs, mpcs, etc as if I had a dreambox
Thank you in advance friends :)
newcs should work.
tvcabo nagra3 works really good here.
or use sbox (tododream)
I've tried a lot of things: newcs+cccam, newcs+mpcs+cccam, multicas+newcs+cccam, sbox+cccam but I've allways failedQuote:
Originally Posted by hfmls
When I used multicas or newcs+incubuscamd I could read my card, but this combinations can't be servers with cccam :banghead:
Are you telling me that there is an alternative software from ToDoDream and is based on SBIN ?
or i did understand you wrong ?
if it is true can i please ask for a link via PM
Quote:
Originally Posted by hfmls
sbox is a card reader like newcs. google it pls.
plus new version from sbox will be out.
with port.list many many cards update
web interface, etc etc
The_Ripper,Quote:
Originally Posted by The_Ripper
Is there any news on this topic?
Regards,
Tommy
I did all the procedure and all went fine with some minor things to ask...
cccam213 worked like a charm when i finished the install but when i did a rst in the box i needed to mannually start it again... is there a way to make it run whenever the box is restarted
and 2nd and last question is that i saw somewhere that i can put a phoenix reader with a usb2serial cable and read a irdeto card with cccam... but nowhere i fount a thread or something to telling how to do that..
Thx in advance and sorry for all these questions..
cheers from greece :-)
Oh well pls anyone?
When i start the box i need to mannually enter with telnet this commands to have cccam running and im trying a whole day to find somewhere to put them to autostart on boot with no success
Does anyone know where to put them? and also i have 2 readers with irdeto card 1 is a new phoenix usb that can work also in smartmouse mode and the 2nd is a serial phoenix reader with a usb2serial adaptor. None of them is readable by cccam 2.1.3... here are my lines in cccam.cfgQuote:
cd /DATA/hdb1/debian
chroot debian /bin/bash
mount -t proc /proc /proc
cd tmp
./CCcam.mipsel
Quote:
SERIAL READER : /dev/ttyUSB0
CAMKEY : /dev/ttyUSB0 00 00 00 00 00 00 00 00
CAMDATA : /dev/ttyUSB0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
TRY ALL CHIDS : /dev/ttyUSB0
After the update of Webmin to version 1.5, I can not log into the webinterface.What are usernae and password by default.
http://img35.imageshack.us/img35/958...debianaaan.jpg
plase Where error
Quote:
Originally Posted by falldaemon
dostum telnette chroot komutu ile debiana geçmen gerek
sende şu şekilde
MMP$[~] cd /DATA/hdb1/debian
MMP$[~] chroot debian
MMP$[~] mount -t proc /proc proc
bu komutlardan sonra istediğin cccam çalıoştırabilirsin
ama
azboxtaki dvblibapi kullanamzsın
debiandan çıkmak için exit yazmalısın ama debianda çalıştırdıgın dosyalar hala çalışır.
sadece geri planda çalıştırarak multicas,mgcamd gibi emulere paylaşım vereceksin.
resolve.conf tada sadece ortaki iplerden birini modem ipsi yap.
kolay gelsin.
teşekkurlerQuote:
Originally Posted by kanber_kav
debian and cccam auto start scprit be found?
I have cccam running in debian on receiver and multicas connected to cccam on reciever, but no ECM's are get through Any ideas or is it best to use something other the multicas to connect.
I've tried different version of cccam 2.0.4 2.1.3 2.1.2 and even 2.1.4 just want to do some testing. but no ecm's getting trough.
The problem is that if we use multicas to connect to a cccam server anywhere then multicas is connected with "no" in the connect line that builds. Im in the same situation as you and i am trying to find a way to change how multicas is connected to cccam servers with no luck so far.Quote:
Originally Posted by Smudger
I'm not trying to share mutlicas to cccam just trying to clear picture from cccam.
You have a card on the box? or you have in the cccam of the debian install some C: lines and you connect to others?Quote:
Originally Posted by Smudger
Sorry for al the confusion.
If I run cccam on azbox under the debian enviroment do I just use dvbapi module to see picture as you would for cccam running with the plugins/lib version of cccam.
hello,
is there anyone who know how to solve this problem?:
AZBox:~# apt-get update
Ign http://ftp.debian.org etch Release.gpg
Ign http://ftp.debian.org etch Release
Ign http://ftp.debian.org etch/main Packages/DiffIndex
Err http://ftp.debian.org etch/main Packages
404 Not Found [IP: 130.89.149.226 80]
Failed to fetch http://ftp.debian.org/debian/dists/e...el/Packages.gz 404 Not Found [IP: 130.89.149.226 80]
Reading package lists... Done
E: Some index files failed to download, they have been ignored, or old ones used instead.
i think i have to update because webmin installation failed, too.