Not sure you should be discussing this on the open forum, but if you know what it is then you must know how to get one.Quote:
Originally Posted by aabs
You need help, from others.
ki
Printable View
Not sure you should be discussing this on the open forum, but if you know what it is then you must know how to get one.Quote:
Originally Posted by aabs
You need help, from others.
ki
Quote:
Originally Posted by kegnkiwi
Ki your right, And I do but its where to look. Been comfortable/lazy with old Sammy for to long and missed the boat on this journey of discovery.:beatdeadhorse5:
Following this..........
HackSat_Key_downloader_v9_for_dm8 00 with dcc ftp into /usr/script and change chmod (attributes) to 755 then into blue panel
extras / settings then scroll down to user-script and run HackSat_Key_downloader
But when I enter user-script via blue panel HackSat_Key is never there just this
Ifconfig
Modules
Netstat
Ecm.info
What am i doing wrong ???
PS Using Gemini 3.7
Abs, mate,
Installing the Hacksat keys wont get you any other packages that installing a dreambox key file. Using gemani here is how to install a softcam if you have not already.
Gemani 3.7 select the blue button then option 2 addons. Then download gemani server then select cam enteries and download a cam (use cccam 2.09), next then exit back and download the same name cam config file. After installing a cam exit back out then push blue button and select first option select cam using left and right arrows. It will change to the one you have downloaded. Then green button to start the cam. You will need the keys installed as describled earlier.
Installing dreambox key files is easier too.
Download the latest dreambox or eagle box keys file. Extract the file within.
Send the keys file to usr/keys
send the scce fiel to usr/scce.
This will give you all the latest channels.
Packages still clearing, polsat, premier, digi tv, plus lots of odd channels here and there.
ki
Thanks Ki, I already got the ******bundle method done.
Im trying to play with the box and learn the different methods but hit a dead end that I cant sort with the hack****** file. Just cant get it to appear even with the attributes changed.
hi guys, this thread gave me the final knowlegde to get my dm800 up and running, so thank you so much, deepest respect:bowing-036::bowing-036::bowing-036:
does this work with the satankey bundle?
It surely does.. Cheers kegnkiwi.. i was started a thread earlier abt how to get cam's working.. turns out i was ftp'ing var instead of usr... lol
Easy when you know how..
I'm Trying to Flash an Image to my mates box and i'm not getting anywhere my head is a shed:001_07: I followed this to do list and everything went fine up to point 6....here i ended up at a page that said..... 'Dream Box Webbrowser TV'...or something similar and a row of selections like...TV.......Radio.......Films ....Web TV.....etc.Quote:
Originally Posted by hda5
I had no option to do anything...Has anyone any Idea were iv'e gone wrong please?
rgds.Tryharder
looks like you let the dreambox bootup instead of holding in the little button near the front oled when you first switch it onQuote:
Originally Posted by Tryharder
once you have done this , you will get some details i,e BOOT , and an ip address so write that ip down
now put that IP into your web browser after http:// and you will get the loading screen on your pc ( assuming you are connected by ethernet through a router )
then you browse to the file as per the instructions and tell it to load , then leave it while it flashes the box until it says complete
when you reboot the box , go through all the menus to setup different things like the screen and network , and the motor or fixed dish part too
then when finished assign a fixed ip for the dreambox in its menu , so that it always uses this same local ip address ( apart from when you are flashing it )
so eventually if the router is say 192.168.1.1 as a host , set the dreambox to say 192.168.1.15 or some other number a good 10 or more away from the router host , turning off dhcp and setting that last number manually and saving it
Thanks echelon....I did what you said about holding the front button down and got the IP of the box.... I pasted it in a browser and got a page saying something about ..' If you are seeing this page you haven't any Linux based operating system on the box'....I had the Dreambox Control Centre open and at this point the connection between the Pc..Router and Box..ie.(the green line) turns red and the connection is lost so i unplug the DB and plug it in again it then shows a Network...I then once again paste the IP of the box in the browser and it is at this point that i get the page i posted earlier....When I have done the first part to get the IP of the Box should i wait a little longer for something else to happen?
rgds.Tryharder
you dont need dcc open at all . or connected
just follow the instructions as listed , but its the little tiny button near the oled that you press whilst powering on , not the power button mentioned in the copy and paste , and then when it says boot , wait for the ip address , and note it down , then use that ip address in the web browser
once you have the web browser up , you will see some sort of loading screen in that browser , and use that to locate the file
rebooting the box means you have bypassed the loading screen as its booting up if you havent pressed the little button on powering up , which is why you are eventually seeing the web interface for the box , probably on a different ip ( but could be the same ip )
so just follow the instructions exactly as listed but its the little front button you hold , not the power button
OK...did that again...
pressed the button and got the IP..on the DB sscreen it says........
Dream Multimedia
ip..192. etc. etc.
*** stop ***
I copied the IP and pasted it into a browser...I then get taken to a page headed...
This is the DM800 bootloader Web Interface........
If you see this, your box didn't boot to Linux.
Unless you interrupted the boot process, this usually means that you have no valid operating system in flash.
Don't panic! It's not a problem. You can just flash a new version and everything will be fine!
Otherwise, you can boot from network or USB.
If you're about to give up, you might get help at the Dream Multimedia Support board!
Currently there aren't many other features...
I have done EXACTLY as posted and this is the page i am taken to....
any ideas please??
Thanks for the continued help..
rgds.Tryharder
click the Firmware Upgrade Tryharder m8ey as in image 1
then you get new page as in image 2
navigate to nfi image you want to flash :king-041:
Thanks spider...
Done that and loaded the image...NabiloBlackhole_DM800_07, nfi
Is that correct mate...Do I now connect it to the TV?
rgds.Tryharder
I am surprised at you using such an old image
I would have used blackhole 0.11 or 0.12 , or one of the new dream elites ( 1.0 or 1.6 ) or the latest oozoon or similar ( providing its not a clone )
but the details spider gave you are correct for loading once you are on that webloader screen
the dm800 should be connected to the tv by say scart at first while you deal with all the questions it asks you on booting , then maybe change to hdmi later when you have got more used to it
The Image was suggested to me Echelon so that is why i loaded it...
I have connected via scart and done the basic set up..d/l a cccam and settings....I have various menu's but no picture it says configure tuner A and then crashes via a green screen and reboots..The Lnb is connected but don't seem to get a signal...If i re-attach my Eagle it works fine..
Never seems simple when i do this stuff:eek:
Thanks..
regards Tryharder
Just a thought....as daft as it may sound..does it need a particular LnB with it being a HD box?
rgds.Tryharder
could be a bad flash , but I would try say nabilo 0.11 if you really want an image in the flash as opposed to a pureflash in there for usb booting
be aware if its a clone you may need to use a clonesafe image
a standard , modern , universal lnb will work just fine
what image was on the box before this re-flash Tryharder m8ey ????
As far as i know it wasn't flashed...So i asked a mate on Toes who has been really helpfull sorting my Eagle box out if he would help me sort out a mates Dreambox 800 HD PVR and he suggested the Image i mention in my 1st post..Anyway I have now loaded ...NabiloBlackhole_DM800_011G2.nf i as Echelon suggests.....I am trying to understand the next stage so i am reading plenty...I assume i need to D/L some settings..channel lists etc. to get it to do it's thing and i am VERY open to any suggestions:)
I appreciate all the help so far....Thanks
rgds.Tryharder