i am also finding wifi conection drops from azbox alot with this fw
Printable View
i am also finding wifi conection drops from azbox alot with this fw
as follows;
unlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!: No such file or directory
ERROR: ChannelSDK_LoadNetwork:871 MP(1414874370) is unknown type=861347924
ERROR: ChannelSDK_LoadNetwork:793 different network type(0xa43710)
ERROR: ChannelSDK_InitNetwork:731 Fail to load network(/DISK2/DVBS.dat)
ERROR: ChannelSDK_LoadNetwork:765 Fail to open '/DISK2/DVBC.dat'
ERROR: ChannelSDK_LoadNetwork:765 Fail to open '/DISK2/DVBTa.dat'
ERROR: ChannelSDK_LoadNetwork:765 Fail to open '/DISK2/ISDBT.dat'
ERROR: ChannelSDK_LoadNetwork:765 Fail to open '/DISK2/ATSC.dat'
Display mode: FND
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Comp : May 14 2010 13:26:59
Ver : SDecoderCtrl.so, NormalPushCtrl 2.8.5.1.1918
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
g_msq_client_connect : key_request 0x59075AB key_response 0x59075AC
Can't find DVBS ??
i get exactly the same ... could morsor post exactly what he does step by step in detail to how to get sly uk epg ?
thanks:respect-023:
good to know that SAUS04 thought it was just me!!! :blush5:
:respect-048:Quote:
Originally Posted by beamobhoy
rescan you satelite.
For the rest the firm is great, but attention, you really must use the swap , or the box will hang frequently.
This is the line in the getepg.conf file for extract EPG in Sky UK from satQuote:
Originally Posted by beamobhoy
SkyUK skyUK 2 0 i 14;11778000;1
Download your channel list to MaZ and check the net index of Astra 28,2E. If does not match the number indicated in red on the line, change it for the correct.
http://img831.imageshack.us/img831/773/sshot3.png
i still get nothing. it has the right net index .. i get failed to recieve errors all the way down.. morsor please step by step how epg works am i missing something?
same here - net index correct - still nothing. :beatdeadhorse5:
got it working.. i used maz ftp edited the config to take the # out of rytec file path for sly uk it works but seems to disaperer if try and do anything inside panelkgd or reboot is there anyway of saving the data make sure you are in settings menu when you ./getepg is there away of stopping the data going away?
uk epg working fine for me.
first i used
SkyUK skyUK 2 0 i 14;11778000;1 but in telnet i see it is a bit longwinded.
so i used the xmltv option with use my own list of channels (my channels file is still called rytec.channels.xml) . i used this just download the epg for the channels i want. It was the same files as i used with azopenepg.
rytecxmltv_UK xmltv 5 0 i /DATA/usb1/sda1/XMLTV/;rytec.channels.xml;http://www.xmltvepg.be/rytecxmltvuk.gz
I changed line to get 5 days but that still only loaded 1 day, i had to change the epg script to nice -19 ./getepg -d5.
I need to see the logs of telnet to see the problem.
x beamobhoy.
These errors are not normal, you have a problem in the file .. DVBS.datCode:ERROR: ChannelSDK_LoadNetwork:871 MP(1414874370) is unknown type=861347924
ERROR: ChannelSDK_LoadNetwork:793 different network type(0xa43710)
ERROR: ChannelSDK_InitNetwork:731 Fail to load network(/DISK2/DVBS.dat)
10000 thanks to genius KGD team
new firmware is beautiful :cheers2:
@morser
when i enable SkyIT skyIT 2 0 i 6;11881000;1 in getepg.conf
it loads ok and everything but i dont know where it stores the file cuz i cant find .xml in the folder specified in .conf
You can see where the file is in your config file. where the
DATA/usb1/sda1/XMLTV is the normal location . but you can edit it to where ever you want i store it on my internal hdd
The line SkyIT skyIT 2 0 i 6;11881000;1 extracted epg from the satellite and loads it into the memory of azbox. Do not save any files.Quote:
Originally Posted by aoryx
hello morser. could i make a few suggestions for improvments.
1. daemonepg. - is there a way you could make it check theres an internet connection active before allowing this to run? if it runs and theres no active connection it wipes out the existing data and locks up the box.
2. epg loss - is there not a way of reloading epg information after a reboot? the information just disapears.
3. compatibility with the search epg facility with azbox. is it possible to configure so azbox epg search facility works with the epg data. i have tried again just wipes data.
thanks for your great wok:bravo-009::respect-069::respect-055::respect-046::respect-067::respect-040:
saus04
1 - It's complicated. If you use the extract epg from not need InternetQuote:
Originally Posted by SAUS04
2 - For now it is not possible, it is necessary to run the getepg again
3 - For me, work fine epg search:
http://img213.imageshack.us/img213/5310/epgsearch.png
Its really starting to p**s me off with this fw. i have premuim set up with wireless. wpa2 encryption and every so often the network just drops from the azbox. its an issue with this fw as it only happens on the azbox network fine on laptop. its annoying as f?*k as it is always when am loading epg data.
never had this problem with previous azbox fw's is this a known issue
any fixes advice?
ive reinstalled fw. tried with latest azbox fw and is fine. but with this kgd fw it happens alot
i haven't tested unencrypted because it isnt an option.....
10000000000000 thanks for kgd team for this fw
stable fast and amazing:congratulations-008
had some glitches but its all gone after DOM format /swap file
also
@morser thanks fot clarifying that
i tried to add OSN but all i couldn't get it to work
OSN1 skyuk 2 0 i 172;11996000;0 <== data according to king**sat
OSN2 skyuk 2 0 i 172;11862000;1 <== epg according to king**sat
only format that worked was opentv and only worked for 11966 although its DATA in king**sat and gave me
endless
and 11862 didnt give me anything although its the EPG in king**satCode:Reading Channels...
Get OpenTV (SkyBox) EPG
Reading Channels...
Get OpenTV (SkyBox) EPG
Reading Channels...
Get OpenTV (SkyBox) EPG
Reading Channels...
Get OpenTV (SkyBox) EPG
Reading Channels...
Get OpenTV (SkyBox) EPG
u have anyidea how to know format of this epg
and most importantly what other Character sets can i use to be specific can i use (Windows-1256)
thanks alot in advanced
Sorry, I do not know the system used by OSN.Quote:
Originally Posted by aoryx
Character sets posiibles: i -> for ISO-8859 and u -> for UTF-8
How do i install oscam for azbox (as client for cccam)?Quote:
Originally Posted by moicas3004
thx