hi wheare is bungouk gone he hase no post anew file
Printable View
hi wheare is bungouk gone he hase no post anew file
I am still trying to get JSC open again thanks
I have an updated JSC however it keeps freezing but thought i would post anyways incase it works for others and not me.
Also i have to keep going on each JSC channel changing setting (9797)to auto as it always picks the wrong caid and ident. on a TM5400.
Sorry all if this not working that well i am trying to sort it
Thanks mate, I'll try it later and report back asap!:respect-050:Quote:
Originally Posted by bungouk
sorrey the file is not working bunguk
I think everyone on here is grateful for you efforts bungouk its nice to help people
Thanks for your efforts m8
:respect-051: bungouk
Regards FENEKI
No mate, sorry 'not open' for me either, sorry so late coming back to you!
Thanks again for trying!:respect-050:
sorry 'not open' for me either
JSC sports 1 to 10 all ok.
I have attached a screenshot of CILQUER ICI of it working.
Regards
Bungouk
hi load fresh file and see your screenshot but not working for me thank for your help
hi i 2nd post i set windowfire wall its open now thank you your post and help
How is JSC sports working for people
working fine here (just jsc sport 9 not working)Quote:
Originally Posted by bungouk
Worked here thanks mate - but for only 20mins before it went off at 1935hrs BST with 'timeouts' & 'not open' in DOS box!
There were a lot of freeze ups too when it was on!
Thanks again for trying Bungouk!:respect-055:
still working 1 to 10 now.
It really is weird how files work for different people at different times?
Yesterday when it gave me 20mins then went off, despite several reboots, reloads, etc etc, I had to assume it must have gone off for everyone, but apparently not!
Strange eh?:confused:
stopped working for me about 10 pm last nite
stop working this morning
Same here mate!:respect-055:Quote:
Originally Posted by bsnake
Anybody got JSCto work today?
I am looking into this hopefully get it working over weekend
Good luck mate, we are all behind you!!:grouphug::respect-055:Quote:
Originally Posted by bungouk
All JSC sports 1 to 10 ok as off 10.35 2nite
thanks files ok
Thanks Bungouk mate - you are a STAR!:respect-055:
Is it working for you holmroad
It worked at first on Sports 1, but failed on Sports 2.
Then Sports 3 worked for about 30 secs before going off!
Tried all 1-10 after that but none now openig mate!
Incidentally my Malawayres keeps telling me access to 94. ........ is blocked so did try to address that!
Also noticed that when JSC Sports 1 DID actually open, it took a long time to do so, so maybe previously I havent been giving it long enough!
Anyway sorry Bungouk mate, nothing doing at all now!
Thanks again for trying though!:bowing-036:
working now m8Quote:
Originally Posted by holmroad
Well all can say is you are doing much better than me mate - I tried again after my previous post and still no joy - said 'not open' and was timeouting all the time!Quote:
Originally Posted by bsnake
Maybe the server was busy, but a little surprising on a Monday afternoon?:respect-055:
(But will try again soon & report back!)
1130hrs BST: Still failing to connect - plus 'not open' messages in DOS box!
It was working ok last nite for me i wll check later when get in from work. Have you checked your firewall settings
Hi Guys, any other than Sport channel that can be found using this method? and how
cheers
jsc working here in south east ireland, watching the football. keep up the good work bengouk
working fine for me. watching the chelsea match at the moment. great work bengouk. please keep it up
I can try disabling my AVG Firewall, but never had to before mate!Quote:
Originally Posted by bungouk
It IS funny that Malawayres doesnt seem to like your latest server provider though, but not quite sure how to bypass that! Never was a problem in the past though! Weird eh?:bravo-009:
As of 20/10/10 1110hrs BST JSC Sports 1-10 still not opening for me with following DOS display:-Quote:
Originally Posted by bungouk
2010/10/20 11:07:18 3432 s logger started (pid=5208)
2010/10/20 11:07:18 3432 s resolver started (pid=5592, delay=30 sec)
2010/10/20 11:07:19 3432 s proxy started (pid=5892, server=www.xxxxxx)
2010/10/20 11:07:19 3432 s anti cascading: disabled
2010/10/20 11:07:20 5892 p02 proxy www.xxxxxxxx:2010 newcamd525 (fd=4)
2010/10/20 11:07:20 3432 s serial: initialized (pid=4964, auto@/dev/ttyS0)
2010/10/20 11:07:25 4964 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)
(Also disabled Malawayres)
Any ideas please Bungouk mate?:respect-055:
Hi Guys
what i have done to make it work:
1 from the control panel>windows firewall> turned it off.
2 double clicked on SBCL folder then executed the SBCL application
3 SBCL opened i had to click on Vplug twice to activate it( you will see the tick)
4 clicked on cliquer (Dos window open)
5 on all the JSC did the 9797 then auto then save/exit.
( I have TM5300+ super) hope this help
I will try and get an updated file either 2nite or over the weekend thanks for your patience while i am trying learn.
Bungouk you are doing a great job, and spending a lot of your time to make a lot of people happy on this forum well done!:bowing-036:Quote:
Originally Posted by bungouk
JSC updated and working as of 22.30 hope it works for you all aswell.
Thanks mate - will try it when I get home as been away for weekend!Quote:
Originally Posted by bungouk
QWhatever happens you are a STAR - and thanks once more for all your efforts mate!
Wonder if anyone else has tried it yet?:respect-050: