How to start REAL CCCam 2.0.11 version(patched by me) on Azbox'es

@hfmls
is that works good for you now?
cheers

i tested. it work's better...really better. much more stable.

but i prefer mbox.

i tried this trick and its not better. Still same problems. sometime opens, sometimes doesnt. HD channels are still one big problem.

Mbox is really great but i cant find any good server so...

Concerning the possibility to decrypt some channels:
- I have tested successful some keys with mgcamd, then copied these 3 files into /EMU/lib (Autoroll.key, SoftCam.key, Constant.cw)
- Edited cccam.cfg like this:


#DVB API: -1
################################# ################################# ##
# CCCAM 2.09 #
################################# ################################# ##

C: xxxx

################################# ################################# ##


################################# ################################# ##
SOFTKEY FILE : /EMU/lib/SoftCam.Key
AUTOROLL FILE : /EMU/lib/AutoRoll.Key
CAID PRIO FILE : /EMU/lib/CCcam.prio
PROVIDERINFO FILE : /EMU/lib/CCcam.providers
CHANNELINFO FILE : /EMU/lib/CCcam.channelinfo

################################# ################################# ####
# Other config settings #
################################# ################################# ####
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s or set port 0
#
SERVER LISTEN PORT : 17500

# server can give some info about server and client connections
# and cardinfo using telnet or webbrowser.
#
# Switch on/off access to info
# default is yes
#
ALLOW TELNETINFO : yes
ALLOW WEBINFO : yes

# The webinfo service can be protected with a username and password.
# This is switched off by default
#
#WEBINFO USERNAME : <username>
#WEBINFO PASSWORD : <password>

Etc.
I cannot see channels previosly opened with mgcamd. Please, what's wrong on my file?
Thank you

Quote:

---

Originally Posted by MrKappa

Concerning the possibility to decrypt some channels:
- I have tested successful some keys with mgcamd, then copied these 3 files into /EMU/lib (Autoroll.key, SoftCam.key, Constant.cw)

---

Make sure your file names are .Key and not .key and AutoRoll not Autoroll
I also suggest you use a trimmed down cfg file, copy this and your C line to a new file, let me know how you get on...

SOFTKEY FILE : /EMU/lib/SoftCam.Key
AUTOROLL FILE : /EMU/lib/AutoRoll.Key
PROVIDERINFO FILE : /EMU/lib/CCcam.providers
CHANNELINFO FILE : /EMU/lib/CCcam.channelinfo
STATIC CW FILE : /EMU/lib/constant.cw
SERVER LISTEN PORT : 17500
ALLOW TELNETINFO : yes
ALLOW WEBINFO : yes
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 0
OSD USERNAME : root
OSD PASSWORD : azbox
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : no
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : yes
EXTRA EMM LEVEL : no
NEWCAMD STEALTH : 0

I am trying out terrormans script

Ok now

Got it working.....

anyone knows why when i reboot i can connect with internet explorer ip:16001 and when pass 5 minutes i cant connect with explorer.

in firefox it's work 100%

to me happens the same than explorer i cant connect but reboor and yes during 2 minutes. im going to test change 16001.

Code:

---

New: v1.6
[+] Fix -> Change Lang
[+] Add -> Unistall Function
[+] Add -> Module.seq
-----------------------------------

---

@kanber_kav

can u tell me pls, how u fixed segfault at CCcam 2.1.2? Tried so many things, nothing.

Would be great.


cu
kid

Quote:

---

Originally Posted by kid

@kanber_kav

can u tell me pls, how u fixed segfault at CCcam 2.1.2? Tried so many things, nothing.

Would be great.


cu
kid

---

Azboxhd install debian.
and runing cccam 2.1.2

Quote:

---

Originally Posted by gtg60

Make sure your file names are .Key and not .key and AutoRoll not Autoroll
I also suggest you use a trimmed down cfg file, copy this and your C line to a new file, let me know how you get on...

SOFTKEY FILE : /EMU/lib/SoftCam.Key
AUTOROLL FILE : /EMU/lib/AutoRoll.Key
PROVIDERINFO FILE : /EMU/lib/CCcam.providers
CHANNELINFO FILE : /EMU/lib/CCcam.channelinfo
STATIC CW FILE : /EMU/lib/constant.cw
SERVER LISTEN PORT : 17500
ALLOW TELNETINFO : yes
ALLOW WEBINFO : yes
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 0
OSD USERNAME : root
OSD PASSWORD : azbox
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : no
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : yes
EXTRA EMM LEVEL : no
NEWCAMD STEALTH : 0

---

Hello', no success so far! :(
But many thanks for your help.

I have created a new empty cccam.cfg as you suggested.
I confirm to have on /EMU/lib the following files:
AutoRoll.Key, SoftCam.Key. constant.cw, CCcam.providers, CCcam.channelinfo (everything written with proper letters)
I have changed the server port of course.
I confirm that I use only "dvbapiCAS" as EMU.

I'm still trying some other combinations...
Thanks

@kanber_kav

I know, we're talking bout an installed debian, no chance for me, segfault.

Is it the cfg maybe, i took an old one and a new one, same result.

Sorry if this has been asked before, Could you please tell me how to stop this CCcam, because sometimes I need to stop this CCcam to use the Client CCcam (CCC version). Thanks.

for many channels HD to view, change CCcam.channelinfo and CCcam.providers and test .
for me i have watch many channel HD by this method .

@sami
use "killall" module in telnet . just

Whole package Platforma DV&HD on 9E is not decoded by This CCcam. However, it opens without problem on the client CCcam(CCC version).

Quote:

---

Originally Posted by medmed

for many channels HD to view, change CCcam.channelinfo and CCcam.providers and test .
for me i have watch many channel HD by this method .

---

very helpful tip ..thanks

after other test , erase CCcam.providers and just put one nice
CCcam.channelinfo ,
for me i have add provider of NatGeo HD (french) and Eurosport HD (french) , and SCI FI HD (french) and Canal+ HD (french) and Ushuiai TV HD ,..
after that this channels it's open very well .