Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

08-11-2010, 03:17 PM
paulobr

Quote:

Originally Posted by Juka

Hi

You can find it, here:
https://www.satpimps.co.uk/showthread.php?t=142195

Regards
Juka

But it work with s2 channels and the media player, sounds and emus in elite model?
Regards
08-11-2010, 03:19 PM
MoRpHiUS_x

Please only used this thread to discuss the firm's The_Ripper.

For another thing or firm, used another thread.

Thanks!
08-11-2010, 03:44 PM
AAOM

Quote:

Originally Posted by paulobr

But it work with s2 channels and the media player, sounds and emus in elite model?
Regards

No, this is the same 1.0.31 E2 kernel.
08-11-2010, 04:34 PM
richy18

Quote:

Originally Posted by The_Ripper

@richy18
I attached usbserial+ftdi kernel modules.
Try it pls.

I've tried the driver.

1. copying drivers to /lib/modules/2.6.22.19-19-the_ripper/extra/

2. depmod -a
-> ok

3. mknod /dev/ttyUSB0 c 188 0
-> ok

4. modprobe usbserial
-> ok

5. modprobe ftdi_sio
->ok

6. Plugged in smargo and a valid nagra smartcard.

dmesg output:

Code:

usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver

cat /proc/tty/drivers

Code:

... usbserial /dev/ttyUSB 188 0-254 serial ...

cat /proc/tty/driver/usbserial

Code:

usbserinfo:1.0 driver:2.0

So... unfortunately the driver does not show the ftdi-module.

4@@@@ said "cat /proc/tty/driver/usbserial" must look like:
0: module:ftdi_sio name:"FTDI USB Serial Device" vendor:0403 product:6001 num_ports:1 port:1 .....

But it doesn't :(

What's wrong now???
08-11-2010, 05:27 PM
The_Ripper

@richy18
Try when you modprobe ftdi driver to add debug option active,
modprobe ftdi_sio debug=1
08-11-2010, 06:03 PM
richy18

Quote:

Originally Posted by The_Ripper

@richy18
Try when you modprobe ftdi driver to add debug option active,
modprobe ftdi_sio debug=1

It makes no difference

modprobe ftdi_sio debug=1

Code:

usbcore: registered new interface driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver

The rest is as described above too...
08-11-2010, 06:49 PM
SPF

@Smudger

I have always extracted the patch files to the PC first, then copy to the USB. I don't think the problem lies with either the USB drives or the patch files. I think it must be whatever does not activate the USB ports or the SATA drives.

Thanks for your suggestion,though.

Stephen
08-11-2010, 06:55 PM
SPF

@shklifo

Thanks for your suggestion. I'm just back home from work so I will check this out tonight and report back to the forum.

Thanks
Stephen
08-11-2010, 07:00 PM
SPF

@The_Ripper

Is it possible that the usbserial+ftdi kernel modules could bring to life my USB ports or are these only relevant for external cardreaders?

Thanks
Stephen
08-11-2010, 08:58 PM
RudElph

@richy18
Try modprobe ftdi_sio vendor=0x0403 product=0x6001
08-11-2010, 09:12 PM
richy18

Quote:

Originally Posted by RudElph

@richy18
Try modprobe ftdi_sio vendor=0x0403 product=0x6001

I've tried this... no change to the situation described above.
08-11-2010, 09:22 PM
kebien

did you try right after depmod -a
update-modules
before modprobe ?
08-11-2010, 09:28 PM
richy18

Quote:

Originally Posted by kebien

did you try right after depmod -a
update-modules
before modprobe ?

yes... always the same :(
Make's no difference.
08-11-2010, 10:47 PM
4@@@@

I also tryed to get smargo working with the modules. Cam does not see the card.
I know that in ufs910 E2 there was some patch needed to work with enigma2 on sh4. _network has written the patch. No idea if this is the case here.
@The_Ripper: Which source have you used - the one from 2.6.15 source was working with the original kernel.
08-11-2010, 11:21 PM
richy18

Quote:

Originally Posted by 4@@@@

I also tryed to get smargo working with the modules. Cam does not see the card.

Yes, same situation as me.
My workaround to watch pay-tv with E2 on Azbox at the moment is sharing the smartcard from my Dream800HD. It works as expected. CCcam on Azbox with DS3.0 Image act as client and I can watch Sky (and Sky HD).

But it would be better to read the smartcard directly by azbox...
Hope The_Ripper will find a solution soon or in later images.

At the moment I'm still absolutely thrilled by E2 on Azbox :respect-039:
A big thank to The_Ripper :bravo-009:
08-11-2010, 11:53 PM
ebro

Am I doing something wrong or is the ???.azbox-enigma.eu site down?
09-11-2010, 12:02 AM
Juka

Quote:

Originally Posted by ebro

Am I doing something wrong or is the ???.azbox-enigma.eu site down?

Try this one:

Code:

http://www.azbox-enigma.eu/e107/news.php

Regards
Juka
09-11-2010, 12:03 AM
richy18

Quote:

Originally Posted by ebro

Am I doing something wrong or is the ???.azbox-enigma.eu site down?

Site is online: http://www.azbox-enigma.eu/e107/news.php

Perhaps a temporary failure?
09-11-2010, 12:06 AM
ebro

I guess it might be an issue my end. I am getting "The website declined to show this webpage" when I try the links.

Sorry for being off topic.
09-11-2010, 12:41 AM
Anrakh
Firefox gives me a white screen and IExplorer gives this:
Quote:
The website declined to show this webpage

HTTP 403 Most likely causes:

This website requires you to log in.

What you can try:

http://satpimps.co.uk/bullet.png Go back to the previous page.

Show 40 post(s) from this thread on one page