Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

02-11-2010, 01:56 PM
pateken

work wifi internal azbox premium?

tnx
02-11-2010, 02:09 PM
gorgeit

jamesjay
i was using composite and got no picture
i switched to hdmi and all works
02-11-2010, 02:11 PM
kelddamsbo

Tested Enigma 2 v1.0.31 on P+, but it cant find any channels, no signal on tuner.
Gone back to Enigma 2 v1.0.30, and tuner okay.

Cant get CCcam or newcs to fint my smargo cardreader+, is it not supported on P+, has anyone tried it ?
02-11-2010, 02:12 PM
vizes111

re

Quote:

Originally Posted by Blackie

Could you describe your Azbox model & TV connection?

samsung LCD Premiu+

scart & HDMI
02-11-2010, 02:39 PM
gorgeit

kelddamsbo
same here reverted back to Enigma 2 v1.0.30 also
02-11-2010, 02:42 PM
vizes111

re

Quote:

Originally Posted by gorgeit

kelddamsbo
same here reverted back to Enigma 2 v1.0.30 also

me, too back up regained
02-11-2010, 03:56 PM
pingflood

Here is the QT Webbrowser plugin patched to install on E2. The installer will look for room in the following order:
1. /dev/hdb1
2. /dev/sdb1
3. /dev/sda1

Remember to have at least 150MB free in order to install and that this proccess take a couple of minutes.

Download here:

Code:

http://www.multiupload.com/39SI45BQOA

The browser still not very responsive and here it has some screen resolution issues.
I saw some scriptings in the installer about this and will take a look other time.

Mouse works fine (not very good, but fine). Later I'll check how keyboard works with it.

If you have some experience, share with us. :)
02-11-2010, 04:15 PM
marcinq76

@e2 team

please don´t ban me because of this question...

Is there any time frame for the audio timer?

To be honest, it´s the only bug forcing me to stay on the official beta... (and my wife:-))
02-11-2010, 04:33 PM
numark0504

Ci Slots

hi all,

does somebody know when the ci slots are working?
thanks for answer in advance !
02-11-2010, 04:39 PM
moicas3004

When they are done....:respect-050:

You guys, the team is working, so sit and wait for the releases.

Everiting in its time.
02-11-2010, 06:00 PM
T33

Problems changing channels with v .31 (used .29 before). Channels "hang" and I can only get back to a moving video by changing to the channel I came from. I should also add that I had problems using the first driver for the premium (that was solved a day or 2 later).

Last part of dmesg:

DVB: video0 stop command sended to the video decoder
dvb_video_release
DVB: audio0 stop command sended to the audio decoder
DVB: audio0 play command sended to the audio decoder
DEMUX: SetSource(0)
DVB: video0 Open the pools
DVB: video0 dmapool id = 3
DVB: video0 count : 1, timeout = 10000
DVB: audio0 Open the pools
DVB: audio0 dmapool id = 4
DVB: audio0 count : 1, timeout = 10000
DVB: video0 play command sended to the video decoder
DVB: audio0 play command sended to the audio decoder
DVB: audio0 play command sended to the audio decoder
dvb_ca_ioctl: Error - invalid ioctl 80086f87
dvb_ca_ioctl: Error - invalid ioctl 80086f87
dvb_ca_ioctl: Error - invalid ioctl 80086f87
dvb_ca_ioctl: Error - invalid ioctl 80086f87
DVB: Error EMhwlibReceiveBuffer! RM_INSUFFICIENT_SIZE -> for PID 0001
DVB: Error EMhwlibReceiveBuffer! RM_INSUFFICIENT_SIZE -> for PID 1FA2
DVB: Error EMhwlibReceiveBuffer! RM_INSUFFICIENT_SIZE -> for PID 1FA3
DVB: Error EMhwlibReceiveBuffer! RM_INSUFFICIENT_SIZE -> for PID 1FA3
DVB: Error EMhwlibReceiveBuffer! RM_INSUFFICIENT_SIZE -> for PID 1FA2
DVB: Error EMhwlibReceiveBuffer! RM_INSUFFICIENT_SIZE -> for PID 1FA3

EDIT: Gone back to .29 and it's OK to use again.
02-11-2010, 07:39 PM
jamesjay

Quote:

Originally Posted by jamesjay

@ The_Ripper

I was using a scart cable not HDMI, I have tried with a composite cable from the video out of the box, to the composite in on my TV, which is a Panasonic plasma...and there is no difference, I have noticed however that when I was using the scart cable there was a very quick flash on the top of the black/blank TV screen but don't know if this is relevant.

I have telneted using putty and I am getting opendreambox 1.0.5 Azbox, I don't think I have seen any of the ones you have qouted...I have to go out now but will have a play again later with the composite cable in and report back to you.

Thanks again for help.

James.

@ The_Ripper

Using a composite or scart cable made no difference, i don't get an IP address I have been using filezilla to look at the files "update" and "backup_kernel" to see if they are in the right directory with "update" being 755 Chmod and they are where they should be...when I putty this command: ./update /MMP/backup_kernel
I get the reply -SH: ./update: not found

If I try to flash any firmware using a USB stick the box just bypasses the stick regardless of if it is the oldest or newest original opensat firmware...I even tried flashing E2 1.0.30 and that didn't work.

I can connect to the box with DCC, filezilla, putty, ACC, and even when I use Azup I get a connection but it responds with a box saying "No rescue mode!!!" "Put patch.bin on your USB stick, reboot and try again", so I must have corrupted the E2 download somehow and I am missing files?

Thanks for putting up with me!!!

James.
02-11-2010, 08:50 PM
feedme

Quote:

Originally Posted by rsl123

To use usb keyboard and mouse there is one kernel module missing: uhci-hcd.ko

Needed modules are: hid.ko uhci-hcd.ko usbhid.ko usbkbd.ko usbmouse.ko

I've compiled uhci-hcd.ko. The mouse is working in Qt Webbrowser. The keyboard is recognized but not working.

Maybe, my module is not 100% compatible to the_rippers kernel!

* modules compiled by the_ripper + uhci-hcd.ko

Code:

http://hotfile.com/dl/79814413/5062d...dules.zip.html

* copy the 'misc' folder to '/lib/modules/2.6.22.19-19-the_ripper/kernel/'
* make

Code:

depmod -a

* reboot the box with connected mouse/keyboard
* all usb devices are listed in

Code:

cat /proc/bus/usb/devices

someone is able to use the keyboard?

Installed browser and all usb-stuff after I realised that they are not included in the browser pack.
The mouse is working.
kbd is not working with the browser.
BUT I can move in the normal enigma menus , arrow keys, number keys, esc working.
Jus can't find any key for MENU : ), so must open menu first with remote.
02-11-2010, 09:34 PM
pingflood

Quote:

Originally Posted by feedme

Installed browser and all usb-stuff after I realised that they are not included in the browser pack.
The mouse is working.
kbd is not working with the browser.
BUT I can move in the normal enigma menus , arrow keys, number keys, esc working.
Jus can't find any key for MENU : ), so must open menu first with remote.

You can try to customize the keymap for this.

Take a look at @neutrino keymap here:
https://www.satpimps.co.uk/showthread.php?t=141557

Does your keyboard works in any other plugin, or this issue is just with webbrowser?
02-11-2010, 10:03 PM
rsl123

Hadn't realized that the keyboard is working in the menus. I can also use the keyboard in other plugins. Only not in the web browser.
But something must be wrong with the driver: caps-lock and num-lock can't get be activated.

And, in Qt browser the mouse moves only when the sat tv is not spluttering...
03-11-2010, 10:20 AM
kelddamsbo

I have found out there is not any usb to seriel driver in the present image.
I need ftdi_sio.ko and usbserial.ko for my P+.
Can I just take them from the original firmware ?
How di I install them, just some modprobe ?
I need them for CCcam to use my smargo cardreader.
03-11-2010, 01:04 PM
MickeySa

Update :

Thanks to the DDamir and the_ripper - VFD fixed on Elite/Premium/Premium+ ( Showing all actions on VFD ) , P+ and Ultra FAN Control, Standby ( it is under work, as the power button is not yet mapped and it is used also for REBOOT ).

Stay tuned !
03-11-2010, 03:39 PM
pingflood

Great news, @MickeySa!

My Premium is eager to test a new version. :)
03-11-2010, 03:50 PM
leerock

This team, every couple of days,
are making greater steps forward,
than Openbug in a whole year!!

Thanks a lot the ripper, telesat, mickey and tommy!
03-11-2010, 04:22 PM
[0_o]

Great improvement!
Thanks a lot to all team!
:)

Show 40 post(s) from this thread on one page