Printable View
My 1st test as Premium+ user. 1.0.30
Overall very good and impressive. :)
Used Diseq 1.2 with vbox ok
I have scanned my own channels successfully, but with some BBC channels have SID not found in PAT errors on 28E.
Intermittent no sound which is a known issue.
One Problem Found.
I can crash the image in Positioner Setup when press the Left Curser button on the remote when Tune is highlighted.
Congratulations to The Ripper and his team on resurrecting the Azbox :)
@onzifonzi
You must contact sattomy regarding MP , he is maintainer of the dvbmediasink plugin for Azbox/Sigma.
Paste some info regarding AVI/MKV file you tried to play ...
@kevinch9, here in satpimps I can't yet answer by PM, so I'll answer here.
I think that your question regarding the installation of Arora/QT Webbrowser without and HDD could be useful for another pals.
I think you must have an hdd in order to install Arora/QT Webbrowser.
If you have, try with this package:
Also, as stated by @rsl123, the installation package search for automount device named /dev/sd*1.Code:http://rapidshare.com/#!download|377|408951593|enigma2-plugin-extensions-webbrowser_0.1.20.1_mipsel.ipk|58238
On E2 the harddisk is mapped on /dev/hdb. So you must remap devices to installer:
Then, install the package:Code:ln -s /dev/hdb /dev/sdb
ln -s /dev/hdb1 /dev/sdb1
Is needed about 150mb of free space.Code:opkg install /path/to/enigma2-plugin-extensions-webbrowser_0.1.20.1_mipsel.ipk
After this, reboot AzBox and remake the links, again with:
And start the webbrowser.Code:ln -s /dev/hdb /dev/sdb
ln -s /dev/hdb1 /dev/sdb1
If you don't have an hdd, you can try to link sdb* as sda* in all previous steps.
I don't know if this will work, but worth a try. :)Code:ln -s /dev/hdb /dev/sda
ln -s /dev/hdb1 /dev/sda1
Remembering, as stated by @shklifo, here are the devices used in E2:
Tomorrow I'll start testing better the modules and browser. I'll try to patch the installer to use /dev/hdb1 firstly then /dev/sda1 and /dev/sdb1.Quote:
1) hda (/dev/hda) is the DOM and the partitions are hda1,hda2 etc.
2) hdb (/dev/hdb) is the internal hard disk with partitions like hdb1, hdb2 etc.
3) sda (/dev/sda) is the first attached usb device with his partitions sda1, sda2 etc
4) sdb (/dev/sdb) is the second attached usb device with the partitions sdb1, sdb2 etc
Any news I'll share here.
Luck and regards.
@sattomy,
Here is the little dmesg log from my elite box (1.0.30) when I try to play avi file.
The same avi I've played yesterday with 1.0.29.
@The_Ripper
Where can we put startup scripts or commands?
Regards,
onzi
Diseqc 1.2 Positioner Setup Problem
Limits Off using Red button does not seem to disable the limits of my positioner for me?
EDIT**
My Dreambox is the same so it must be something else causing it and not Azbox E2.
I've ordered a new VBox as mine is very old and no support available. That should fix my problem. :)
Posted elsewhere but in case you didn't know Enigma 2 v1.0.31 is out
Devices suitable for flashing : Elite - Premium - Premium+ - Ultra
What is new :
- Added support for DVB-S2 Tuner in Ultra model
- Volume UP and Down Mute and Un-Mute for all models
- Few more fixes
Download here
Thanks for your reply Pr2,Quote:
Originally Posted by pr2
I have tried a USB stick with various patch.bin on and that did not work, I have even tried 4 different USB sticks from 4gbs to 1gbs.
Azup is stating "you have a NEW kernel in your Azbox" but it can't find rescue mode, so I presume because it knows there is a new kernel, I am using the correct IP address even though the VFD is not showing an IP address, I think the box is not responding to the USB stick in other words it is not loading the new patch on the front or back USB port.
On boot up with a patched USB the box states booting, VFD ready, shows a load of symbols and after that a load of random numbers with what looks like this # next to the numbers. This is what it gave out on the last bootup with a USB stick: 63# 100# 70# 100# 63# 100# 63# 100# 69# 100# 50# 100# 50# 100# 50# 100# 54# 100# it then stays on 100
I am not getting the clogs E2 pages or menu's so I don't think it is in normal E2 mode.
James.
i had the same problem , but it turned out to my connection to the tv .
on one im connected by scart and on the other hdmi .
i thought it didnt work until i looked at the hdmi feed and was there try jiggling your cables around
First update about qt webbrowser subject:
1. If you don't have an hdd, if you do
it will install on usb drive connected.Code:opkg install /path/to/enigma2-plugin-extensions-webbrowser_0.1.20.1_mipsel.ipk
Just make sure you have enough free space for the installation (about 150MB).
You don't need to remap drives with symlinks.
After install, just reboot with usb drive connected and check plugins.
2. I have patched the installer to try to install in hdd first. If no hdd, then it will install on usb drive. I'll do some testings and if it's ok I'll upload the package somewhere.
Quote:
Originally Posted by gtg60
unfortunately wrong the new one e2
:frown::frown::frown:
63 # 100 # 70 # 100 # 63 # 100 # 63 # 100 # 69 # 100 # 50 # 100 # 50 # 100 # 50 # 100 # 54 # 100 #
there is not a picture there is not a menu
I will test this in a few days. Not near an azbox for the coming days.Quote:
Originally Posted by onzifonzi
Regards,
Tommy
Could you describe your Azbox model & TV connection?Quote:
Originally Posted by vizes111
What is planned for the next version, or what is currently working on?
Can one tell what it looks like maybe with SCT timer, CI, recording?
Another big thanks for making the super work you and the team.
Quote:
Originally Posted by jamesjay
press OK button on remote control when you see VFD READY...
I did try that earlier but will give it another go later...will also try on the box itself as well.Quote:
Originally Posted by VAJX
Cheers M8.
Hi,
Is in 1.0.31 a fixed tunner driver which supports Elite,Premium,Premium+ and Ultra ?
Thanks
@jamesjay
Can you pls connect box to the composite out (analog) and check, in current HDMI code HotPlug doesnt work, ofcourse if you havent tried this yet.
EDIT: One more thing, when you telnet to receiver you will know that you are in rescue mode if you see this
and if you are in E2 and telnet, I think this you will seeCode:Powered by The Ripper, telesat && MickeySa ;)
Code:OpenDreambox 1.6.0 dm800
@ The_RipperQuote:
Originally Posted by The_Ripper
I was using a scart cable not HDMI, I have tried with a composite cable from the video out of the box, to the composite in on my TV, which is a Panasonic plasma...and there is no difference, I have noticed however that when I was using the scart cable there was a very quick flash on the top of the black/blank TV screen but don't know if this is relevant.
I have telneted using putty and I am getting opendreambox 1.0.5 Azbox, I don't think I have seen any of the ones you have qouted...I have to go out now but will have a play again later with the composite cable in and report back to you.
Thanks again for help.
James.
Will You work on ISDB-T tuner too?
Is anyone else getting lag on picture of sat channels?
Is this part of the Timer thing that is a known issue?
I am using AZBox Premium, with the newest E2 version 1.0.31 on Astra 2
PS.
Big thanks to The_Ripper and team! Enigma is looking better and better by the day!