please provide me with a couple of minutes of recording. I will see what i can do, but wmv is not implemented yet.Quote:
Originally Posted by onkelm
Printable View
please provide me with a couple of minutes of recording. I will see what i can do, but wmv is not implemented yet.Quote:
Originally Posted by onkelm
1-SignalQuote:
Originally Posted by @telesat
The signal in the display is about 68% in both providers SD and HD( signal from TP wright )
The BER i didn't check
If it helps i can go to Satfinder, in tunner setup and check. The strange thing is that in the original FW displays fine. This MEO provider is know for its very limited reception, but if i have good screen in original FW should it be ok in E2 also with the same signal ?
The BER what it means ? High values means bad reception? In the SD I remember i had about 8000, and for HD i had really high values like 100000.
2- In HD ( MEO 30W mpeg4 ) is sparks and mosaic. ( SD no problem very good ZON 30W. HD in this provider, ZON 30W, displays fine )
Maybe i have to increase signal reception for this provider. A few E2 FW ago is was fine, my bad not have checked for the signal % :sifone:.
Hi,
This is my first post and I'll try to make it the last one regarding off topic issues.
I'm sorry to disturb the work of the ones that are really working on this project, and I didn't wanted to become one as the others that post things in this thread saying nothing like Yes, you are right and repeating well known bugs.
I would like to know, if it's possible to restrict the writing on the thread only to the guys that are developing and testing so that users like me could follow up the good work that is being done and not spending time with bull**** that so many users write.
And if I'm interested in participate I just ask for it in another thread or via private message to be add to the group with permissions to write in the thread.
Thanks for your hard work.
Best regards from Portugal,
NRRibeiro.
I would say a sticky thread without reply option like - "Bug/To Do List - LOOK HERE FIRST" may be more helpful.Quote:
Originally Posted by Smudger
I know that the silly questions are annoying, mostly because people are to lazy to search the thread, but it's also annoying to read a reply "this was asked 1000x before read the thread" every time. Just don't reply to already answered questions, then people are forced to search...
Otherwise, I understand some of these impatient guys. It is also hard for me not to ask about DVB-C every day, things are devleoping fast and so good that I can't await to test it ;) Specially when I think of the original firmware...
i have some error after Azup.exe i getting IP the update abort the msg it saidQuote:
Originally Posted by @telesat
patch.cramfs Created.
after coming erron file not found unable to Complete Request
then after ok press it said
Pls switsch off and then switsch on Azbox try again!!!
edit now fine just on remot reboot then fine not from power off then on
my 2. ask does cardreader work?
@ NRRibeiro
If you look you will see that below this section, there are already sections for discussion of E2 Elite, E2 Premium, and E2 Premium plus, but no one is using them they are just adding their requests for E2 and repeating already answered questions in this thread.
Quote:
Originally Posted by The_Ripper
Hi Ripper we really appreciate the work...can you guys give out a paypal email address so I can buy you guys some beers :D
OpenSat actually give to this Team so much beers !! hehehe €€€€€ !!Quote:
Originally Posted by lucky13
They didn't get anything! And they don't want anything! They are doing this just for hobby.Quote:
Originally Posted by jromero
Am I right guys? :respect-062:
Hi sattommy,
personally, I don`t think it is wmv.Quote:
Originally Posted by sattommy
please provide me with a couple of minutes of recording. I will see what i can do, but wmv is not implemented yet.
The m2ts files are copied from my blue ray of "the drak knight" - so it is a normal m2ts file of a blue-ray.
I think the mediaplayer is identifying this file wrong as a wmv.
That causes the warning.
With the recordings of dream or vu+ I will do a recording and an upload soon.
regards
OnkelM
@onkelm
Can you mux your BRRIp into a mkv file and see if it works?
I have personal interest on that matter.
Do AzBox with E2 ..... .28 May be reproduced picture with HDMI cable to your TV, or must wait for the new version, and what is happening around tons enigma, whether soon be something new about tog.Thanks ...
What?? Could you include a google translation in English from you native language?Quote:
Originally Posted by looney
i have done E2 Enigma v1.0.29 it has some nothing work what i need
- standby not wroking
- If channal change no sound and sometime freezing crap
- on Display only show 100%
- mkv work on ext2 extern HDD not teste ntfs i will try it
- cardreader with all emu not teste
- cccam work fine and faster
- some settting working fine from upload own setting with 4 LNB
that have teste all thnk ripper and team
@The_Ripper & Telesat
finaly i resolved my problem.
The pixelization on DVB-S2 on MEO sat ig gone. In fact, as i reported the problem was the change in the driver for some elites and for the premium that you guys made in the last FW.( 27, 28 )
I replaced the files posted by you in version 1.0.26 i think ( posted here : https://www.satpimps.co.uk/showthrea...135894&page=83 ), tunnerinfo.py, enigma2 and the other and i have good view on the DVB-S2 channels on MEO 30W HD mpeg4.
So , no problem in reception but in some change in driver. Check it when you have time.
Im using AZBOX ELITE.
PS: Im running enigma 2 on HDD on usb, thanks to sattommy.
Read post 2055 on page 103!!Quote:
Originally Posted by looney
just flashing e2az and had a powercut in the midst of it ,and yup stuck in booting and no geeko and no ip. been reading start of the thread ,
serial rs232 cable will this do it bacicly a standard null modem cable is all i have right now ,is there a cable that i need to add to it as the pins in az are somwhat diffrent to standard serial port so to connect inside box for yamon fix
any lead that i might need ,soz for asking guys ,jst am a bit stuck right now
hello
newcs work fine on Azbox E2 want know what cardreader it is for Azbox like /dev/sci or wiche one and does have someone found driver for cardreader?
on consle i see:
root@AZBox:~# newcs.mips &
root@AZBox:~# This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:56:53
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 1 type 255
[ 20:52:36 ] [ Box detect ] Box type 15 (Azbox)
[ 20:52:36 ] [ Config ] Option <blockc0> for device 0 (SCI Lower Slot) not present, defaulting to NO
[ 20:52:36 ] [ Config ] Option <crypto-special> for device 0 (SCI Lower Slot) not present, defaulting to NO
[ 20:52:36 ] [ Config ] Option <PTShandshake> for device 0 (SCI Lower Slot) not present, defaulting to NO
[ 20:52:36 ] [ Config ] Option <Seca-PPV> for device 0 (SCI Lower Slot) not present, defaulting to NO
[ 20:52:36 ] [ Config ] Pincode for device 0 (SCI Lower Slot): 0000
[ 20:52:36 ] [ Config ] Option <sid> for device 0 (SCI Lower Slot) not present, no static sids added to filter
[ 20:52:36 ] [ Config ] Option <protectedsid> for device 0 (SCI Lower Slot) not present, no PIN Code will be sent
[ 20:52:36 ] [ Config ] /dev/sci0 ECM priority: round
[ 20:52:36 ] [ Config ] Option <blockc0> for device 1 (SCI Upper Slot) not present, defaulting to NO
[ 20:52:36 ] [ Config ] Option <crypto-special> for device 1 (SCI Upper Slot) not present, defaulting to NO
[ 20:52:36 ] [ Config ] Option <PTShandshake> for device 1 (SCI Upper Slot) not present, defaulting to NO
[ 20:52:36 ] [ Config ] Option <Seca-PPV> for device 1 (SCI Upper Slot) not present, defaulting to NO
[ 20:52:36 ] [ Config ] Pincode for device 1 (SCI Upper Slot): 0000
[ 20:52:36 ] [ Config ] Option <sid> for device 1 (SCI Upper Slot) not present, no static sids added to filter
[ 20:52:36 ] [ Config ] Option <protectedsid> for device 1 (SCI Upper Slot) not present, no PIN Code will be sent
[ 20:52:36 ] [ Config ] /dev/sci1 ECM priority: round
[ 20:52:36 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myShares) on port 1234 - 0x10015438 [ op ptr 0x100163b8 ]
[ 20:52:36 ] [ DNS ] Resolved Hostname localhost to: 127.0.0.1
[ 20:52:36 ] [ Newcamd ] Server name : newcs
[ 20:52:36 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 20:52:36 ] [ Config ] Option <hostname> or <port> not present for User: dummy, DISABLING reverse login
[ 20:52:36 ] [ Config ] Option <readers> not present for User: dummy, NO reader control enabled
[ 20:52:36 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, level: 1
[ 20:52:36 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 20:52:36 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:52:36 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2038
[ 20:52:36 ] Calibrating delay loops
[ 20:52:36 ] usleep(5) takes: 0 s 49 us
[ 20:52:36 ] usleep(10) takes: 0 s 18 us
[ 20:52:36 ] usleep(100) takes: 0 s 108 us
[ 20:52:36 ] usleep(500) takes: 0 s 509 us
[ 20:52:36 ] Allocation memory for 200 regular users
[ 20:52:36 ] [ Loader ] Starting Telnet on port 1001
[ 20:52:36 ] [ SockSrv ] Server thread started
Can't create server: Address already in use
[ 20:52:36 ] [ Loader ] Reader type 5 on node /dev/sci0
need to know what part it is
@ Ripper & Team
Thank you! thank you! thank you!!!!!
All the time I used original FW and MultiCAS I had nothing but problem with CCcam freezes all the time.
Just loaded E2 1.0.29 and CCcam and no freezes at all the res button gives me sound so this is already 10 times better than original and I'm sure picture quality is better.
Again thanks can't wait for future E2 Fw to test
Stavross:party::respect-067:
@moicas3004
Hi friend, you have a tutorial from install e2 from usb hdd? or where to find.
I not find the old posts...
Thanks.